• 동아시아경상학회지
• /
• 제10권4호
• /
• pp.47-54
• /
• 2022

Purpose - In today's era of carbon neutrality, railways need to find ways to improve usability and efficiency. Accordingly, this study examines the effect of introducing express highspeed railways into the Korean public transportation system and suggests some practical guidelines. One concern in the Korea railway sector is that low scheduled speeds contrast with the highspeed railway system design. Research design, data, and methodology - Current literature and foreign cases are analyzed. Subsequently, using data from the Korean Railroad Research Institute, a benefit analysis is conducted based on expanded track capacity and the saving of time owing to the introduction of the express highspeed railway. Result - The express highspeed railway system is expected to increase the number of train lines from 262 to 348 and the scheduled speed from 168.3km/h to 192.2km/h. Considering reduced time value, the economic effect is about 80 million won per year. Conclusion - The findings suggest that the express highspeed railway is a promising option to improve efficiency and increase customer utility. This study contributes to the literature by initiating a discussion on the express system in Korea; practically, it offers railway operators guidelines for improving highspeed railway system efficiency that can be transformed into a variety of marketing options.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 춘계학술대회 논문집
• /
• pp.356-362
• /
• 2011

Usually urban railways are built under ground thus the necessary condition of urban railroad, a linear-shaped track, causes a difficulty in enhancement of speed limits of urban rail. Also the underground construction of city railroad produces speed limit values reduced according to a speed code array, in case of speed decision according to the conventional block section division, thus onventionally it could not but apply speed limit values lower than actual safety speeds. In this study, The above two facts induced the author to study on a method to enhance speed limit values for CBTC within existing urban railroad sectors. Since it is possible to exchange data continuously and to control speeds in case of railroads based on CBTC, the author applied result values of speed limits, which were gained based on a railroad condition, a linear track, to the CBTC system without correction of the result values and then the author compared and analyzed, through simulation, the running times and the efficiencies of running energies between railway stations, between the existing fixed-block system and the CBTC system. As a result simulation, the improvement of speed and the deceleration distance of reduction confirmed that it was effective to reduce the time to travel between stations. A fixed block the set of constraints on the speed limit, he way the operation is optimized based CBTC speed limit by suggesting ways to reset the scheduled speed measures to improve were extracted.

• Journal of Electrical Engineering and Technology
• /
• 제8권5호
• /
• pp.1202-1211
• /
• 2013

This paper deals with a robust controller for an induction motor (IM) which is represented as a linear parameter varying systems. To do so linear matrix inequality (LMI) based approach and robust Lyapunov feedback are associated. This approach is related to the fact that the synthesis of a linear parameter varying (LPV) feedback controller for the inner loop take into account rotor resistance and mechanical speed as varying parameter. An LPV flux observer is also synthesized to estimate rotor flux providing reference to cited above regulator. The induction motor is described as a polytopic LPV system because of speed and rotor resistance affine dependence. Their values can be estimated on line during systems operations. The simulation and experimental results largely confirm the effectiveness of the proposed control.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 B
• /
• pp.1081-1082
• /
• 2006

The more feeding distance of substation is long and travel vehicle increases in feeding section, power supply leaches the limits. And if it exceeds the limit, it causes a serious trouble for train operation. Therefore, it is designed that the number of train increases constantly until 2030. So consistent power supply according to the increasement of vehicle in power system at present Seoul-Pusan high speed railway, regular operation in case of extended feeding occurring accidents in substation, and the least headway scheduled at relevant section and the effects installing compensation facility in case of impossible extended feeding is examined.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제53권7호
• /
• pp.417-423
• /
• 2004

The headway in Korean national railway normally runs from 6 to 10 minutes. It turns out that the current signal system can not decrease the running headway of the High Speed trains, which are scheduled to set out in April, 2004, between Seoul and Daejeon, since both the existing classical trains and the High Speed ones run on the section. Thus, a new signal system is to be introduced to secure safe and reduced headway. The present paper attempts to analyze the headway between this particular section Seoul-Daejeon of the classical line, where we expect the most severe bottleneck situation to occur. We employed two modes in our analysis : the Ground Signal mode and the On-board Signal mode. which are to be adopted starting from 2006.

• 품질경영학회지
• /
• 제49권3호
• /
• pp.255-268
• /
• 2021

Purpose: We sought to understand why a high-speed rotating projectile featuring a fuze-and-body assembly sometimes exhibited airburst, and we intended to improve the flight stability by eliminating airburst. Methods: We performed characteristic factor analysis, structural mechanics modeling, and dynamic modeling and simulation; and we scheduled firing tests to discover the cause of airburst. We used a step-by-step procedure to analyze the reliability function for selecting the bonding force standard that prevents airburst. Results: The 00MM high-speed rotating projectile features a fuze bonded to a body assembly; the bonding sometimes can break on firing. The resulting contact force, vibration and roll damping during flight generated yaw. Flight became unstable; fuze operation triggered an airburst. Our reliability test improved the bonding force standard (the force was increased). When the bonding force was at least the minimum required, a firing test revealed that airburst/flight instability disappeared. Conclusion: Analysis and identification of the causes of flight instability and airburst render military training safer and enhance combat power. Ammunition must perform as designed. Our method can be used to set standards that improve the performances of similar types of ammunition.

• 대한토목학회논문집
• /
• 제41권1호
• /
• pp.57-64
• /
• 2021

도시부도로에서 변속차로는 도로가 연결되는 지점에 설치되어 상대속도를 낮추도록 함으로써 교통소통을 원활하게 하고 있다. 그러나 도심내 안전 속도 "5030"시행에 따른 제한속도 30 km/h의 경우 기준이 모호하여 변속차로 설치에 대한 지적이 나오고 있다. 본 연구는 변속차로에 대한 이론적 고찰 후 안전속도 "5030" 정책 시행 예정 구간을 중심으로 변속차로 통행패턴을 사례조사를 실시하였다. 현장조사 후 도로조건 및 교통 조건 등에 따라 주도로의 통행 속도별 통행 패턴을 분석한 결과 안전속도 "5030"시행에 따른 변속차로의 실효성을 분석하였다. 본 연구수행을 통해 제시된 속도별 변속차로 설치기준은, 통행속도 30 km/h 구간인 경우는 변속차로를 미설치 하도록 하고, 50 km/h인 경우는 반드시 설치토록 하는 기준을 제시하였다. 향후 도시지역에서 다른 시설의 연결에 대한 공학적 기준을 정립할 때 참고할 수 있을 것으로 판단되며, 변속차로 설치 및 회전반경 확대를 통한 속도별 원활한 교통소통 및 안전성을 확보하고 개인의 사유재산권 행사에 대한 불필요한 제약을 최소화하는데 기여할 수 있을 것으로 기대된다.

• 한국방재학회 논문집
• /
• 제3권2호
• /
• pp.111-118
• /
• 2003

건설중인 경부고속철도에서는 열차의 운행안전을 확보하기 위하여 다양한 안정시스템을 채택하고 있어 예기치 못한 재해발생으로 인한 인적 물적 피해의 최소화에 만전을 기하고 있으나, 국외규정이 도입되는 과정에서 국내 선로, 기후, 지형 지질학적 특성을 반영한 국내규정으로는 정립되어 있지 않은 현실이다. 따라서, 본 연구에서는 강우시 고속철도의 안전한 운행을 위해 현재 설정되어 운용 예정인 강우시 운전규제를 위한 경계우량의 문제점을 파악하고 보완함으로써 보다 합리적인 경계우량의 재설정이 가능하였다. 또한, 이를 이용하여 CTC 등의 중앙통제기구에서 정상운행 경계발령 열차속도규제 운전정지의 4단계로 강우상황에 따라 열차의 안전을 명확하게 확보할 수 있을 것이며, 자연재해 발생 최소화에 기여할 수 있을 것이라 판단된다.

• 한국해양공학회지
• /
• 제33권2호
• /
• pp.196-202
• /
• 2019

In this study, the excessive noise and vibration phenomena of a high-speed Ro/Ro passenger ship were analyzed, and a countermeasure was taken based on them. This ship was granted a comfort class notation by the classification society, which was COMFORT-VIBRATION-II and COMFORT-NOISE-CREW-II. However, unfortunately, excessive noise and vibration in the aft part of the ship were delivered from the twin shaft propellers, and therefore the Class Requirement was not satisfied before delivery. In order to obtain the class notation, all of the concerned parties came to an agreement to reduce the noise and vibration level during operation after delivery because a seasonal ferry service was already scheduled and the cabin was fully booked. The root cause of the massive amount of noise and vibration was mainly the propeller-induced excitation pulse and beating that occurred from the mismatch of the rotating speeds of the two shaft lines. A 1st order vibrating force and beating phenomena existed in the propeller. Thus, a reduction of the excitation force, elimination of the beating phenomena, and decrease of the noise level at the aft area cabins and public spaces were required. In addition, structural reinforcements were conducted using pillars and additional girders at the aft part of the decks.

• 한국철도학회논문집
• /
• 제17권3호
• /
• pp.210-215
• /
• 2014

도시철도의 표정속도를 증대시키기 위해 여러 가지 방안이 연구되고 있는데 출입문 폭 확장을 통한 정차시간 단축은 이러한 방안 중 하나이다. 그러나, 출입문 폭을 확장하였을 때 단축되는 승객 승하차시간을 예상하기 위해 적합한 국내 모델과 수식은 아직 수립되지 않은 형편이다. 승하차 동작은 사람의 행동 방식에 영향을 많이 받고 이는 국가 별로 상이하다는 점을 고려한다면 승하차시간에 대한 외국 모델을 따른 다는 것은 적합하지 않다. 본 연구에서는 국내에서 측정 및 실험한 데이터를 바탕으로 국내 환경에 적합한 모델을 세우고 관련 수식과 변수를 유도함으로써 출입문 폭 확장 시 승하차시간 단축효과를 예상할 수 있도록 한다.