• Journal of Preventive Medicine and Public Health
• /
• v.27 no.3 s.47
• /
• pp.475-486
• /
• 1994

In order to provide necessary information for better health of workers through understanding the actual status of the industries adopting shift systems. The data were gathered from a stratified random sample of 347 (0.5%) firms selected out of about 70,000 manufacturing industries throughout the nation in 1993. Stratification during sampling was by industrial group and number of workers. The major findings obtained from 288 firms surveyed completely were as follows : 1. About 20.2% of the 288 firms were adopting shift systems and shirtworkers accounted for about 25.1% of the total work force in 288 firms. 2. The bigger number of workers was, the higher the adopting rate of shift system was. 3. The rate of having welfare facilities such as dining room, commuting bus, washing facilities, and health care room etc. was higher in the industries adopting shift systems. 4. The major industrial groups adopting shift systems were the rubber a: plastic goods manufacturing industry (54.1 per 100 firms) and the textile manufacturing industry (44.8 per 100 firms). However, the proportion of shiftworkers was higher in the textile manufacturing industry (70.5 per 100 firms) and the electronics industry (57.9 per 100 frms). 5. The most predominant work schedule was the weekly rotating, semi-continuos 2-crew 2-shift system (47.5%). 6. In the industries adopting shift systems, shiftworkers had an adjusted average of 0.29 spells per 100 workers ($0.14{\sim}0.45$ in 95% C.I.) compared to 0.23 spells per 100 nonshift dayworkers ($0.15{\sim}0.31$ in 95% C.I.) for 1 month. 7. Also, in the industries adopting shift systems, the adjusted average annuel turn-over rate of shiftworkers was 13.07 per 100 workers ($12.03{\sim}14.12$ in 95% C.I.) compared to 10.18 per 100 nonshift dayworkers ($9.53{\sim}10.82$ in 95% C.I.).

• Journal of KIISE:Computer Systems and Theory
• /
• v.26 no.10
• /
• pp.1264-1274
• /
• 1999

본 논문에서는 분산된 클록들을 주기적으로 동기화 시키는 분산 실시간 시스템에서 시간적 제약을 만족시키기 위한 정적/동적 시간 제약(timing constraint) 변환 기법을 제안한다. 전형적인 이산클록동기화(discrete clock synchronization) 알고리즘은 클록의 값을 순간적으로 조정하여 클록의 시간이 불연속적으로 진행한다. 이러한 시간상의 불연속성은 시간적 이벤트를 잃어버리거나 다시 발생시키는 오류를 범하게 한다.클록 시간의 불연속성을 피하기 위해 일반적으로 연속클록동기화(continuous clock synchronization) 기법이 제안되고 있지만 소프트웨어적으로 구현되면 많은 오버헤드를 유발시키는 문제점이 있다. 본 논문에서는 시간적 제약을 동적으로 변환시키는 DCT (Dynamic Constraint Transformation) 기법을 제안하였으며, 이를 통해 기존의 이산클록동기화 알고리즘을 수정하지 않고서도 클록 시간의 불연속성에 의한 문제점들을 해결할 수 있도록 하였다. 아울러 DCT에 의해 이산클록동기화 하에서 생성된 태스크 스케쥴이 연속클록동기화에 의해 생성된 스케쥴과 동일함을 증명하여 DCT의 동작이 이론적으로 정확함을 증명하였다.또한 분산 실시간 시스템에서 지역 클록(local clock)이 기준 클록과 완벽하게 일치하지 않아서 발생하는 스케쥴링상의 문제점을 다루었다. 이를 위해 먼저 두 가지의 스케쥴링 가능성, 지역적 스케쥴링 가능성(local schedulability)과 전역적 스케쥴링 가능성(global schedulability)을 정의하고, 이를 위해 시간적 제약을 정적으로 변환시키는 SCT (Static Constraint Transformation) 기법을 제안하였다. SCT를 통해 지역적으로 스케쥴링 가능한 태스크는 전역적으로 스케쥴링이 가능하므로, 단지 지역적 스케쥴링 가능성만을 검사하면 스케쥴링 문제를 해결할 수 있도록 하였고 이를 수학적으로 증명하였다.Abstract In this paper, we present static and dynamic constraint transformation techniques for ensuring timing requirements in a distributed real-time system possessing periodically synchronized distributed local clocks. Traditional discrete clock synchronization algorithms that adjust local clocks instantaneously yield time discontinuities. Such time discontinuities lead to the loss or the gain of events, thus raising serious run-time faults.While continuous clock synchronization is generally suggested to avoid the time discontinuity problem, it incurs too much run-time overhead to be implemented in software. We propose a dynamic constraint transformation (DCT) technique which can solve the problem without modifying discrete clock synchronization algorithms. We formally prove the correctness of the DCT by showing that the DCT with discrete clock synchronization generates the same task schedule as the continuous clock synchronization.We also investigate schedulability problems that arise when imperfect local clocks are used in distributed real-time systems. We first define two notions of schedulability, global schedulability and local schedulability, and then present a static constraint transformation (SCT) technique. The SCT ensures that it is sufficient to check the schedulability of a task locally in a node with a local clock, since the global schedulability of the task is derived from its local schedulability through SCT. We formally prove the correctness of SCT.

• KIPS Transactions on Software and Data Engineering
• /
• v.9 no.11
• /
• pp.357-366
• /
• 2020

As the proportion and complexity of software embedded in aircraft increase, risk factors such as mission failure, function failure and performance failure due to software errors also increase. In the mission-critical software systems such as aircraft software, managing requirement traceability is essential to maintain the software systems with minimal period and cost. However, the development company is not accurately complying with the guideline for managing requirement traceability due to various reasons such as development cost and schedule. Therefore, it is not easy to systematically establish and maintain requirement traceability. In the paper, we analyze actual test cases of aviation software systems from the viewpoint of requirements traceability in order to learn if there are failure cases of test cases due to the absence of systematic traceability management activities. We also check the risks associated with the failure cases according to the type and severity of the cases. As a result of analyzing a total of 7 aircraft-mounted software, failure cases could be divided into three types: omission of requirements, lack of connection between requirements and test procedures, and omission of test procedures. There were a total of 18 failure cases, 6 for each type. The numbers of high, middle and low risks were 1, 13 and 4, respectively, where the number of middle risks is largest.

• The KIPS Transactions:PartA
• /
• v.9A no.4
• /
• pp.491-496
• /
• 2002

Most partitioning algorithms for hardware- software codesign do not consider scheduling. Therefore, partitioning should be performed again if time constraints art not satisfied in scheduling the partitioned results. Existing FDS-applied methods which consider scheduling in partitioning decide the control step of the node to schedule while selecting nodes for partitioning. In selecting nodes for partitioning, several aspects should be considered together such as added cost or time due to the partition of the node, or the degree of interference due to the scheduling of the node. At this time, the induced force, which means the degree of intereference of scheduling other nodes, is computed all over the control step of the corresponding node and other depending nodes. In this paper, a new FDS-applied partitioning algorithm is proposed, where partitioning is performed using the defined scheduling urgency and relative scheduling urgency of the nodes. Since the nodes are partitioned by the computation of relative scheduling urgencies only at the earliest control step and the latest control step among the assignable steps, the time complexity for the computation of induced force could be improve. Experimental result on the benchmarks show the improvement of execution time of the proposed algorithm compared to the existing FDS-applied methods.

• Journal of KIISE:Computing Practices and Letters
• /
• v.15 no.11
• /
• pp.846-850
• /
• 2009

Recently, wireless sensor networks have found their way into a wide variety of applications and systems with vastly varying requirements and characteristics such as environmental monitoring, smart spaces, medical applications, and precision agriculture. The sensor nodes are battery powered. Therefore, the energy is the most precious resource of a wireless sensor network since periodically replacing the battery of the nodes in large scale deployments is infeasible. Energy efficient mechanisms for gathering sensor readings are indispensable to prolong the lifetime of a sensor network as long as possible. There are two energy-efficient approaches to prolong the network lifetime in sensor networks. One is the compression scheme to reduce the size of sensor readings. When the communication conflict is occurred between two sensor nodes, the sender must try to retransmit its reading. The other is the MAC protocol to prevent the communication conflict. In this paper, we propose a novel approaches to reduce the size of the sensor readings in the MAC layer. The proposed scheme compresses sensor readings by allocating the time slots of the TDMA schedule to them dynamically. We also present a mathematical model to predict latency from collecting the sensor readings as the compression ratio is changed. In the simulation result, our proposed scheme reduces the communication cost by about 52% over the existing scheme.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.26 no.6
• /
• pp.433-438
• /
• 2016

This paper proposes a grade prediction method to measure meat quality in Hanwoo (Korean Native Cattle) using classification and feature extraction algorithms. The applied classification algorithm is an AdaBoost and the texture features of the given ultrasound images are extracted using SFTA. In this paper, as an initial phase, we selected ultrasound images of Hanwoo for verifying experimental results; however, we ultimately aimed to develop a diagnostic decision support system for human body scan using ultrasound images. The advantages of using ultrasound images of Hanwoo are: accurate grade prediction without butchery, optimizing shipping and feeding schedule and economic benefits. Researches on grade prediction using biometric data such as ultrasound images have been studied in countries like USA, Japan, and Korea. Studies have been based on accurate prediction method of different images obtained from different machines. However, the prediction accuracy is low. Therefore, we proposed a prediction method of meat quality. From the experimental results compared with that of the real grades, the experimental results demonstrated that the proposed method is superior to the other methods.

• Journal of Service Research and Studies
• /
• v.6 no.3
• /
• pp.57-78
• /
• 2016

The purpose of this research is to study how service recovery activities influence customers' commodity churning in the media telecommunication industry(CATV industry). Put it differently, we tried to identify this change of commodity churning rates by the stages of service failures, by which we intend to emphasize the importance of service recoveries. Korean media telecommunication market has already been saturated; customers tend to move to bigger major companies with better customer care increasingly. As once customers gone never returns, CRM functions are being reinforced over the time. We were able to have the following results. First, turning rates, for those experienced service failure, who were dissatisfied with service recovery activities are 2~5 times (monthly average turning rates are 1.3%) higher than those satisfied. Secondly, active service recovery activities at the customer's service request after experiencing service failure lowered churning rates significantly. The most effective timing is service recovery activities pre-recovery stage. Thirdly, reward activities after service recovery activities at the immediate recovery stage is more effective than service recovery at the arranged recovery schedule and reward activities after customer's expressing churning intension. The implications of this study are that firms should engage in service recovery activities at the time of identifying service failures, prior to customer's expressing churning intention, which means relatively lower ROI for the service recovery activities than the times of customers' expressing churning intention.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.3
• /
• pp.100-109
• /
• 2019

Maintainability indicates the extent to which maintenance can be done easily and quickly. The consideration of maintainability is crucial to reduce the operation and support costs of weapon systems, but if the maintainability is evaluated after the prototype production is done and necessitates design changes, it may increase the cost and delay the schedule. The evaluation should verify whether maintenance work can be performed, and support the designers in developing a design to improve maintainability. In previous studies, the maintainability index was calculated using the graph theory at the early design phase, but evaluation accuracy appeared to be limited. Analyzing the methods of evaluating the maintainability using fuzzy logic and 3D modeling indicate that the design of a system with good maintainability should be done in an integrated manner during the whole system life cycle. This paper proposes a method to evaluate maintainability using SysML-based modeling and simulation technique and fuzzy logic. The physical design structure with maintainability attributes was modeled using SysML 'bdd' diagram, and the maintainability was represented by an AHP matrix for maintainability attributes. We then calculated the maintainability using AHP-based weighting calculation and fuzzy logic through the use of SysML 'par' diagram that incorporated MATLAB. The proposed maintainability model can be managed efficiently and consistently, and the state of system design and maintainability can be analyzed quantitatively, thereby improving design by early identifying the items with low maintainability.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.12
• /
• pp.99-109
• /
• 2018

Tampering involves illegally removing technologies from a protected system through reverse engineering or developing a system without proper authorization. As tampering of a weapon system is a threat to national security, anti-tampering measures are required. Precedent studies on anti-tampering have discussed the necessity, related trends, application cases, and recent cybersecurity-based or other protection methods. In a domestic situation, the Defense Technology Protection Act focuses on how to prevent technology leakage occurring in related organizations through personnel, facilities and information systems. Anti-tampering design needs to determine which technologies are protected while considering the effects of development cost and schedule. The objective of our study is to develop methods of how to select target technologies and determine counter-measures to protect these technologies. Specifically, an evaluation matrix was derived based on the risk analysis concept to select the protection of target technologies. Also, based on the concept of risk mitigation, the classification of anti-tampering techniques was performed according to its applicability and determination of application levels. Results of the case study revealed that the methods proposed can be systematically applied for anti-tampering in weapon system development.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.42 no.6
• /
• pp.869-877
• /
• 2022

This study aims to analyze the factors affecting the re-subscription period upon initial termination of the reverse mortgage subscription. The study utilized the Korea Housing Finance Corporation's database to extract the information regarding re-subscribers of the reverse mortgage from July 2007 to June 2021. The ordered logit model was employed and found that a set of user (subscriber) characteristics are influential towards the re-subscription period. Among the individual characteristics, changes in age group, marital status from married to single-living, maintaining single-living, and the initial subscription period were found statistically significant, highlighting that the increase in the initial subscription period decreased the re-subscription period. Among the housing (home equity) characteristics, changes in housing price and ownership type (single and partial ownership) were statistically significant, indicating that the change in ownership type decreases the re-subscription period. Lastly, the variables related to loan terms were found significant, revealing that changes in payout method and schedule were both increasing factors of the re-subscription period. Based on the findings, necessary policy implications can be considered to secure the returning subscribers of the reverse mortgage effectively.