• 한국군사과학기술학회지
• /
• 제23권4호
• /
• pp.328-336
• /
• 2020

This paper presents an asymptotic analysis method using the PO(physical optics) approximation technique to analyze the scattering contribution of an electrically large object partially coated with a radar absorbing material(RAM). By using the feature of the PO technique that can calculate the equivalent current value for each mesh independently, instead of analyzing the entire structure, scattering analysis was performed only by calculating the current on the area where the RAM coating is applied. By the numerical examples, the accuracy and the computation time of the proposed method were verified, and the computational efficiency of inverse synthetic aperture radar(ISAR) of the electrically large objects that require enormous resources is improved.

• Current Applied Physics
• /
• 제18권11호
• /
• pp.1225-1229
• /
• 2018

In this paper, we investigated the electronic structures and defect states of $SrLaMgTaO_6$ (SLMTO) double perovskite structures by using resonant inelastic x-ray scattering. Recently, $Eu^{3+}$ doped SLMTO red phosphors have been vigorously investigated due to their higher red emission efficiency compared to commercial white light emitting diodes (W-LED). However, a comprehensive understanding on the electronic structures and defect states of host SLMTO compounds, which are specifically related to the W-LED and photoluminescence (PL), is far from complete. Here, we found that the PL spectra of SLMTO powder compounds sintered at a higher temperature, $1400^{\circ}C$, were weaker in the blue emission regions (at around 400 nm) and became enhanced in near infrared (NIR) regions compared to those sintered at $1200^{\circ}C$. To elucidate the difference of the PL spectra, we performed resonant inelastic x-ray spectroscopy (RIXS) at Ta L-edge. Our RIXS result implies that the microscopic origin of different PL spectra is not relevant to the Ta-related defects and oxygen vacancies.

• 멤브레인
• /
• 제14권2호
• /
• pp.149-156
• /
• 2004

본 연구에서는 광촉매 반응과 막분리 기술을 접목시킨 혼성 고도 정수처리 공정에서 소독 부산물의 전구체로 알려진 자연산 유기물을 효과적으로 제거하고자 하였고 다양한 운전 조건에서 시스템의 성능을 비교 평가하였다. 자연산 유기물은 흡입여과 방식의 분리막과 TiO$_2$ 광촉매를 이용하여 광분해하였을 때 광촉매 투입량의 증가에 따라 반응속도가 증가하였지만 과량의 촉매 주입시에는 반응 속도 향상에 오히려 부정적으로 작용하였다. 자연산 유기물을 보다 효과적으로 제거하기 위해 산화철 주입, TiO$_2$ 표면처리, 분리막 표면코팅을 시도하여 제거특성 및 운전에 따른 막여과 특성을 평가하였다. 산화철 주입은 초기에 흡착작용으로 인해 제거율 증가를 보였으나 반응이 진행됨에 따라 산화철 입자에 의한 광산란으로 광분해 효율이 오히려 감소되었다. 산화철 입자에 의한 광산란을 제어하고자 TiO$_2$ 표면을 광처리와 열처리 방법을 이용해 철을 직접 부착시킨 경우 긍정적인 효과를 얻지 못했다. 그러나 산화철로 막표면을 코팅하여 광산란 효과를 배제시킨 경우에는 향상된 결과를 보였다 막투과 플럭스 15 L/$m^2$-h에서 정밀여과를 수행하였을 때 TiO$_2$나 산화철에 의한 막오염은 거의 일어나지 않았고 안정된 막투과도를 나타내었다.

• 대한기계학회논문집
• /
• 제15권1호
• /
• pp.341-348
• /
• 1991

본 연구에서는 S$_{4}$ 구분종좌법으로 사각형매질내 복사와 전도가 연계된 열전달문제를 수치해석하여, 유한요소법 및 적분함수를 사용하여 구한 해와 정확도를 비교하였으며 산란매질에 대하여도 계산을 수행하여 그결과를 예측하였다.복사열전 달이 전도열전달에 어떠한 영향을 주는가를 좀더 명확히 알아보기 위하여 열선(heatl- ine)을 정의하여 이의 분포도 도시하였다.

• Advances in nano research
• /
• 제2권2호
• /
• pp.89-98
• /
• 2014

A novel and simple method for the synthesis of nano-magnetite particles is disclosed. In the novel procedure, $Fe^{2+}$ is the only source of metal cation. Carboxymethylcellulose (CMC) is used as the structure directing agent. The phase analysis of the nano-particles was performed using XRD and electron diffraction techniques. Size and morphology analysis was performed using light scattering and TEM techniques. The effect of $NH_4OH$ solution (32 wt. %) at different CMC concentrations on the size distribution of the final magnetite powders is studied. An optimal base concentration exists for each CMC concentration leading to minimal agglomeration. There exists a minimum CMC concentration (0.0016 wt. %), lower than that no magnetite forms. It is shown that using the new method, it is possible to immobilize a lipase enzyme (Candida Rugosa) with immobilization efficiency larger than 98 % with a loading more than 3 times the reported value in the literature. The latter phenomenon is explained based on the agglomerate state of the nano-particles in the liquid phase.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2011년도 춘계학술발표대회
• /
• pp.42.2-42.2
• /
• 2011

$TiO_2$ films were modified by adding a glass frit as a light scattering particle and applied to an anode electrode in dye-sensitized solar cells (DSSCs) to enhance the adhesion between $TiO_2$ and fluorine doped transparent oxide (FTO). Low melting point glass frits at contents of (3 to 7wt%) were added to the nano crystalline $TiO_2$ films. The light scattering properties, photovoltaic properties and microstructures of the photo electrodes were examined to determine the role of the low glass transition temperature ($T_g$) glass frit. Electrochemical impedance spectroscopy, Brunauer-Emmett-Teller method and scratch test were conducted to support the results. The DSSC with the $TiO_2$ film containing 3wt% low Tg glass frit showed optimal performance (5.1%, energy conversion efficiency) compared to the $TiO_2$-based one. The photocurrent density slightly decreased by adding 3wt% of the frit due to its large size and non conductivity. However, the decrease of current density followed by the decrease of electron transfer due to the large frit in $TiO_2$ electrode was compensated by the scattering effect, high surface area and reduced the electron transfer impedance at the electrolyte-dye-$TiO_2$ interface. The stability of the photo electrodes was improved by the frit, which chemically promoted the sintering of $TiO_2$ at relatively low temperature ($450^{\circ}C$).

• 대한전자공학회논문지SD
• /
• 제46권4호
• /
• pp.15-20
• /
• 2009

레이저 광 산란을 이용한 검출 시스템 및 레이저를 이용한 광학적 검출에 있어서 높은 발광 강도를 통해 궁극적으로 높은 효율의 광 산란 신호를 광검출기에서 얻기 위해서는 발광 레이저빔을 미세유체 칩의 채널 중앙에 집광하는 것이 매우 중요하다. 본 논문을 통해 레이저 광 산란을 이용한 세포 검출을 위해 PDMS 마이크로렌즈가 집적화된 PDMS 미세유체 칩을 소개하고자 한다. 기존에 제작된 PDMS 미세유체 칩 위에 간편히 정렬하여 올려놓아 사용함으로써 검출 효율을 증가시킬 수 있는 PDMS 마이크로렌즈를 제작하였다. PDMS 마이크로렌즈는 포토레지스트 리플로우와 PDMS 복제 몰딩에 의해 제작되었다. 이 제작 방법은 간단하며 높은 치수 정확성 및 좋은 마이크로렌즈의 성능을 제공한다. PDMS 미세유체 칩 위에 집적화된 PDMS 마이크로렌즈가 적혈구를 이용한 레이저 광 산란을 통한 세포 검출 실험에서 레이저 강도를 증가시켜 신호대잡음비 및 감도를 증가시킴을 검증하였다.

• 대한방사선기술학회지:방사선기술과학
• /
• 제5권1호
• /
• pp.21-34
• /
• 1982

When unattenuated x-ray radiation passes through the object it is transmitted and scattered from objectes and impinging on the film. During this process certain radiation is absorbed within the object and others transmitted in reduced scattering. The scattering radiation influence upon radiation image quality, confining x-ray beam which means scattering radiation produce increased fog on x-ray film image and as a consequence decrease contrast and less detail of the film there for the elimination of fog and for absorbing scattered radiation, the grid has been used between the object and the film in order to rid of scattering rays. Using grid is good method for the qualification of the better image as well as in using air gap technique. The grid is easy to manipulate and promote good efficiency which is defined by ICRU and JIS. It is the purpose to study for eliminating scattered radiation from the tissue equivalent acryl phantom using grid, we have studied and evaluated the grid permeability about the x-ray exposure, the selection of grid ratio according to phantom thickness, on x-ray exposure are performed as follows. 1. The penetrating ratio of primary x-ray is remarkably decreased by increasing of the grid ratio, but it is almost not influenced in KVP difference and phantom thickness. 2. The scattered radiation is proportionaly increased by thickness of the phantom, having nothing to do with grid ratios. 3. The relative between the penetration rate of primary and secondary x-ray is improved by increasing grid ratio, and decreased by phantom thickness, and slightly decreased by high tube voltage. 4. The grid of 5:1 and 10:1 ratio are adequate to the phantom of 10cm and 15cm thickness, respectively.

• 대기
• /
• 제22권3호
• /
• pp.367-379
• /
• 2012

Measurements of $PM_{10}$ mass concentration, aerosol light scattering and absorption coefficients as well as aerosol size distribution were made to characterize the aerosol physical and optical properties at the two Korean WMO/GAW regional stations, Anmyeondo and Gosan. Episodic cases of the severe Asian dust events occurred in spring of 2009-2010 were studied. Results in this study show that the aerosol size distributions and optical properties at both stations are closely associated with the dust source regions and the transport routes. According to the comparison of the $PM_{10}$ mass concentration at both stations, the aerosol concentrations at Anmyeondo are not always higher than those at Gosan although the distance from the dust source region to Anmyeondo is closer than that of Gosan. The result shows that the aerosol concentrations depend on the transport routes of the dust-containing airmass. The range of mass scattering efficiencies at Anmyeon and Gosan was 0.50~1.45 and $0.62{\sim}1.51m^2g^{-1}$, respectively. The mass scattering efficiencies are comparable to those of the previous studies by Clarke et al. (2004) and Lee (2009). It is noted that anthropogenic fine particles scatter more effectively the sunlight than coarse dust particles. Finally, we found that the aerosol size distribution and optical properties at Anmyeondo and Gosan show somewhat different properties although the samples for the same dust_episodic events are compared.

• 대한원격탐사학회지
• /
• 제27권3호
• /
• pp.303-314
• /
• 2011

Surface albedo is an important parameter of the surface energy budget, and its accurate quantification is of major interest to the global climate modeling community. Therefore, in this paper, we consider the direct solution of kernel based bidirectional reflectance distribution function (BRDF) models for retrieval of normalized reflectance of high resolution satellite. The BRD effects can be seen in satellite data having a wide swath such as SPOT/VGT (VEGETATION) have sufficient angular sampling, but high resolution satellites are impossible to obtain sufficient angular sampling over a pixel during short period because of their narrow swath scanning when applying semi-empirical model. This gives a difficulty to run BRDF model inferring the reflectance normalization of high resolution satellites. The principal purpose of the study is to estimate normalized reflectance of high resolution satellite (RapidEye) through BRDF components from SPOT/VGT. We use semi-empirical BRDF model to estimated BRDF components from SPOT/VGT and reflectance normalization of RapidEye. This study used SPOT/VGT satellite data acquired in the S1 (daily) data, and within this study is the multispectral sensor RapidEye. Isotropic value such as the normalized reflectance was closely related to the BRDF parameters and the kernels. Also, we show scatter plot of the SPOT/VGT and RapidEye isotropic value relationship. The linear relationship between the two linear regression analysis is performed by using the parameters of SPOTNGT like as isotropic value, geometric value and volumetric scattering value, and the kernel values of RapidEye like as geometric and volumetric scattering kernel Because BRDF parameters are difficult to directly calculate from high resolution satellites, we use to BRDF parameter of SPOT/VGT. Also, we make a decision of weighting for geometric value, volumetric scattering value and error through regression models. As a result, the weighting through linear regression analysis produced good agreement. For all sites, the SPOT/VGT isotropic and RapidEye isotropic values had the high correlation (RMSE, bias), and generally are very consistent.