• 분석과학
• /
• 제9권3호
• /
• pp.1069-1075
• /
• 1996

• Bulletin of the Korean Chemical Society
• /
• 제26권7호
• /
• pp.1071-1074
• /
• 2005

A variable-low temperature scanning tunneling microscope (VT-STM), which operates from 77 to 350 K in ultrahigh vacuum, was built and used to study imaging and manipulation of benzene molecules on Si surfaces. Four types of benzene adsorption structures were first imaged on the Si(5 5 12)-2x1 surface. Desorption process of benzene molecules by tunneling electrons was studied on the Si(001)-2xn surface.

• 한국정밀공학회지
• /
• 제20권3호
• /
• pp.5-14
• /
• 2003

• 한국진공학회지
• /
• 제3권4호
• /
• pp.377-381
• /
• 1994

초고진공(UHV) Scanning Tummeling Microscopy(STM)을 제작하였다. 8인치 프란지에 부착한 STM은 초고진공에서 시료의 통전가열이 가능하며 다른 표면 측정방법의 적용과시료처리가 용이하다. 외부로부터 초고진공을 깨지 않고 시료와 tip의 도입이 가능하며 tip을 가열할 수 있다. 완성된 장치로 Si(111)-7$\times$7 구조의 STM상을 얻었다.

• 비파괴검사학회지
• /
• 제14권3호
• /
• pp.157-171
• /
• 1994

진공도가 $10^{-11}$ Torr 수준의 초고진공 상태에서 작동되고 실제공간에서 개별원자를 구별할 수 있는 주사형 터널링 현미경을 제작하였다. 주사형 터널링 현미경의 배경 및 작동원리와 제작에 있어서의 제문제점들을 서술하고 흑연결정과 실리콘에 대해서 관찰한 결과를 보고한다.

• International Journal of Precision Engineering and Manufacturing
• /
• 제9권4호
• /
• pp.11-15
• /
• 2008

Metrology tools with the ability to measure spindle motion error on the order of a nanometer are required due to recent advances in nanotechnology. We propose a direct measurement method for the radial motion error of a precision spindle using a regular crystalline lattice and a scanning tunneling microscope (STM). A highly oriented pyrolytic graphite (HOPG) crystal combined with an STM is used as a two-dimensional reference scale. The measurement principle and the preliminary experimental results are discussed in this article. The preliminary experimental results demonstrated that the proposed method has the capability to incorporate a two-dimensional encoder to measure the spindle motion error.

• Bulletin of the Korean Chemical Society
• /
• 제28권1호
• /
• pp.81-84
• /
• 2007

Ab initio periodic Hartree-Fock calculations with the full potential and minimum basis set are applied to interpretation of scanning tunneling microscope (STM) and atomic force microscope (AFM) images on 1TVTe2. Our results show that the simulated STM image shows asymmetry while the simulated AFM image shows the circular electron densities at the bright spots without asymmetry of electron density to agree with the experimental AFM image. The bright spots of both the STM and AFM images of VTe2 are associated with the surface Te atoms, while the patterns of bright spots of STM and AFM images are different.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1988년도 한국자동제어학술회의논문집(국제학술편); 한국전력공사연수원, 서울; 21-22 Oct. 1988
• /
• pp.794-797
• /
• 1988

G. Binnig and H. Rohrer introduced the Scanning Tunneling Microscope (STM) in 1982 and developed it into a powerful and not to be missed physical tool. Scanning tunneling Microscopy is a real space surface imaging method with the atomic or subatomic resolution in all three dimensions. The tip is scanned over the surface by two piezo translators mounted parallel (X-piezo and Y-piezo) to the surface and perpendicular to each other. The voltage applied to the third piezo (Z-piezo) translator mounted perpendicular to the surface to maintain the tunneling current through the gap at a constant level reflects then the topography of the surface. The feed back control loop for the constant gap current is designed using the automatic control technique. In the designing process of the feed back loop, the identification of the gap dynamics is very complex and has difficulty. In this research, using some suitable test signals, the system dynamics of the gap including the Z-piezo are investigated. Especially, in this paper, a system model is proposed for the gap and Z-piezo series system. Indicial response is used to find out the model. The driving voltage of the Z-piezo and the tunneling current are considered as input and output signals respectively.

• 진공이야기
• /
• 제3권1호
• /
• pp.32-37
• /
• 2016

• Tribology and Lubricants
• /
• 제16권5호
• /
• pp.389-394
• /
• 2000

Scanning Probe Microscope (SPM) such as Scanning Tunneling Microscope (STM) and Atomic Force Microscope (AEM) was shown to be the powerful tool for nano-scale characterization of material surfaces. Using this technique, surface morphology of the cyclically deformed Cu or Cu-Al single crystal was observed. The surface became proportionately rough as the number of cycles increased, but after some number of cycles no further change was observed. Slip steps with the heights of 100 to 200 nm and the widths of 1000 to 2000 nm were prevailing at the stage. The slipped distance of one slip system at the surface was not uniform, and formation of the extrusions or intrusions was assumed to occur such place. By comparing the morphological change caused by crystallographic orientation, strain amplitude, number of cycles or stacking fault energy, some interesting results which help to clarify the basic mechanism of fatigue damage were obtained. Furthermore, applicability of the scanning tunneling microscopy to fatigue damage is discussed.