• Bulletin of the Korean Chemical Society
• /
• 제31권5호
• /
• pp.1336-1338
• /
• 2010

Three cobalt-iron Prussian Blue Analogues (PBAs) nanotubes contained with different alkali metal cations of K, Rb or Cs, respectively, were prepared by using cetyltrimethylammonium bromide (CTAB)/ethanol-water micelles as soft templates. The products were characterized by energy-dispersive X-ray spectroscopy (EDS), X-ray diffraction (XRD), transmission electron microscopy (TEM) and scanning electron micrograph (SEM), which confirmed the composition of the substances and their unique nanotube structures. Furthermore, the formation mechanism of the PBAs nanotubes was discussed and provided useful insight for further synthesis of nanotubes of other Prussian blue analogues.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제44회 동계 정기학술대회 초록집
• /
• pp.302-302
• /
• 2013

본 연구는 이온질화시 self-sputtering에 의한 AISI D2 소재의 표면경화에 대한 연구를 진행하였다. 이를 위해 이온질화시 질소가스와 아르곤 가스를 이용해 이온질화를 수행하였다. 이에 대한 결과는 optical micrograph (OM), scanning electron microscopy (SEM), X-ray diffraction(XRD), transmission electron microscopy (TEM)를 이용해 분석하였다. 실험결과, 소재의 경도는 570 HV에서 약 1470 HV까지 상승하였다. 극표면에 CrN-enriched layer의 형성 및 극표면 아래층에서 질소의 과포된 화합물층을 관찰할 수 있었다. 표면경화는, 극표면에 CrN-enriched layer의 형성과, 아래 N의 과포화에 의한 ${\gamma}$?autenite) phase, 그리고 diffusion layer의 형성에 의한 multi-layer의 형성으로 표면에 강화에 기여한것으로 사료된다.

• 한국화재소방학회논문지
• /
• 제20권4호
• /
• pp.110-115
• /
• 2006

폴리우레탄에 인계 화합물을 첨가하여 폴리우레탄폼을 제조하였으며, 인계 화합물이 제조된 폴리우레탄폼의 기계적 물성과 난연성에 미치는 영향에 대하여 고찰하였다. 폴리우레탄과 인계 난연제인 Tri(chloroisopropyl) phosphate(TCPP), Triethyl phosphate(TEP), Trimethyl phosphate(TMP) 각각을 약 $90^{\circ}C$에서 혼합시켜 혼합물로부터 제조된 경질 폴리우레탄폼에 대한 여러 실험을 통하여 기계적 물성뿐만 아니라 난연 효과도 상당히 향상됨을 확인하였다. Cone calorimeter를 이용하여 열방출율(heat release rate, HRR)을 측정하여 난연 첨가제의 함량에 따른 재료별 난연 특성을 평가하였다. 그리고 Scanning Electron Microscope(SEM)을 사용하여 난연제를 첨가하여 만든 폴리우레탄폼의 morphology를 관찰한 결과 순수한 폼과 마찬가지로 매우 균일한 형태의 cell 분포를 가짐을 확인하였다.

• Mycobiology
• /
• 제29권1호
• /
• pp.15-18
• /
• 2001

Protoplast fusion is a useful technique for establishing fungal hybrids to overcome the natural barriers. The ultrastructure of protoplast and its fusion process were observed using a scanning electron microscopy(SEM) and a transmission electron microscopy(TEM). The protoplasts were variable in size from $0.5{\sim}15{\mu}m$ in diameter, and the mean diameter was about $3{\sim}5{\mu}m$. It was impossible to discriminate protoplasts of Lentinula edodes from protoplasts of Coriolus versicolor by size and surface structure. Big aggregates of the dehydrated protoplasts were observed, after polyethylene glycol 4000 treatment. Nucleus, mitochondria, lipid granules and various vesicles having granules were scattered in the cytoplasm. The vesicles were heterogeneous in size and vary from one protoplast to another. The fused membrane layer of the two protoplasts was observed. Time protoplast membrane contact and reorganization of membrane components were essential condition for protoplast fusion. Transmission electron micrograph showed fused protoplasts and flattening of the cells in the area of the membrane contact. We hope that our electron microscopic observations provide some insights into the understanding of the fusion process of protoplast in fungi.

• 열처리공학회지
• /
• 제35권1호
• /
• pp.1-7
• /
• 2022

In this study, dissolution and melting phenomenon of the Al₂Cu was studied for the high-strength Al-Si-Cu aluminum alloy in automobile component. The Solution heat treatment was performed at 480℃ and 510℃ for 4hours. Microstructure analysis of the specimen was performed using the optical micrograph and scanning electron microscope for qualitative and quantitative analysis of various phases, the chemical composition of secondary phases was achieved by energy dispersive spectroscopy (EDS) and electron probe micro analysis (EPMA). As a result of the electron probe micro analysis, a plate like Al₂Cu phase was observed, and eutectic Si phase was observed of a coarsen plate shape. At a temperature of 510, necking phenomenon occurs in a specific part of plate like Al₂Cu, and it is segmented and dissolved in the Al matrix. When the temperature of the alloy exceeds the melting point of Al₂Cu, incipient melting occurs at the grain boundary of undissolved Cu particles

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2011년도 제42회 하계학술대회
• /
• pp.1440-1441
• /
• 2011

Apatite-lanthanum silicate has attracted considerable interest in recent years due to its high oxide ion conductivity, In this paper, Bi-doped samples $La_8Bi_2(SiO_4)_6O_3$ were prepared by conventional solid-state method and the influences of Bi-dopant content on calcining temperature were reported. The Samples were characterized by X-ray diffraction (XRD) and scanning electron micrograph (SEM) and impedance analysis.

• 한국응용과학기술학회지
• /
• 제24권2호
• /
• pp.182-189
• /
• 2007

Used polyurethane was chemically degraded by treatments with flame retardants such as tris(3-chloropropyl) phosphate (TCPP), triethyl phosphate (TEP), and trimethyl phosphate (TMP). The structure of degraded products (DEP) was analyzed by FT-IR and P-NMR and it turned out to be phosphorus containing oligourethanes. Rigid polyurethane foam was produced by using the degraded products (DEP) as flame retardants. The flammability of recycled rigid polyurethane was investigated. The recycled polyurethane shows a reduced flammability over virgin polyurethane. In order to evaluate flame retardant properties of the recycled polyurethane foams with various amounts of DEP, the combustion parameters of the foam was measured by a cone calorimeter. Scanning electron micrograph of recycled PU shows the same uniform cell morphology as virgin PU.

• 통합자연과학논문집
• /
• 제4권3호
• /
• pp.192-196
• /
• 2011

New method to encode multiple photonic features of Bragg type reflector on silicon wafer has been investigated. Multiple bit encodes of distributed Bragg reflector features have been prepared by electrochemical etching of crystalline silicon by using various square wave current densities. Optical characterization of multi-encoding of distributed Bragg reflectors on porous silicon was achieved by Ocean optics 2000 spectrometer for the search of possible applications of multiple bit encoding of distributed Bragg reflectors such as multiplexed assays and chemical sensors. The morphology and cross-sectional structure of multi-encoded distributed Bragg reflectors was investigated by field emission scanning electron micrograph.

• 한국세라믹학회지
• /
• 제31권11호
• /
• pp.1283-1292
• /
• 1994

Ultra-fine $\beta$-SiC powders were fabricated by self-propagating high temperature synthesis process (SHS) using chemical furnace. The dependences of the C powders with different surface areas, the molar ratios of C/Si, the weight ratios of chemical fuel content, and pellet diameter-size on synthesis were investigated. Compositional and structural characterization of these powders was carried out by scanning electron micrograph and X-ray diffraction. The $\beta$-SiC powders which had C/Si mole ratio=1.05, 3 times chemical fuel contents, and pellet diameter=20 mm were optimum for synthesis efficiency. By optimizing process-variables, it is possible to fabricate $\beta$-SiC powders which have little secondary phases ($\alpha$-SiC).

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2006년도 춘계 학술발표회 논문집
• /
• pp.896-905
• /
• 2006

Several soil parameters such as particle characteristics, geological element, drainage and loading conditions are influenced on the shear strength of soil. The characteristics of soil particles are important factor to the shear strength of soil. However, this component is not well considered in the determination of soil strength in Korea. The particle shape of sand was analyzed by utilizing SEM(Scanning Electron Micrograph) and compared its results in terms of aspect ratio, angularity and roughness. Based on the determined soil parameters, the ultimate bearing capacity of sandy ground was estimated by using Terzaghi bearing capacity equation.