• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.38 no.12
• /
• pp.957-962
• /
• 2014

We present a method to quantitatively measure the thermal conductivity of one-dimensional nanostructures by utilizing scanning thermal wave microscopy (STWM) at a nanoscale spatial resolution. In this paper, we explain the principle for measuring the thermal diffusivity of one-dimensional nanostructures using STWM and the theoretical analysis procedure for quantifying the thermal diffusivity. The SWTM measurement method obtains the thermal conductivity by measuring the thermal diffusivity, which has only a phase lag relative to the distance corresponding to the transferred thermal wave. It is not affected by the thermal contact resistances between the heat source and nanostructure and between the nanostructure and probe. Thus, the heat flux applied to the nanostructure is accurately obtained. The proposed method provides a very simple and quantitative measurement relative to conventional measurement techniques.

• Macromolecular Research
• /
• v.13 no.3
• /
• pp.194-205
• /
• 2005

The network structure of Ni-coated carbon black (NCB) composites filled with phenolic resin was investigated by means of using scanning electron microscopy, viscosity, interfacial tension, shrinkability, Flory-Huggins interaction parameters, and swelling index. The electrical properties of the composites have been characterized by measurement of the specific conductivity as a function of temperature. Additionally, the variation of conductivity with temperature for the composites has been reported and analyzed in terms of the dilution volume fraction, relative volume expansion, and barrier heights energy. The thermal stability of phenolic-NCB composites has been also studied by means of the voltage cycle processes. The experimental data of EMI wave shielding were analyzed and compared with theoretical calculations. The mechanical properties such as tensile strength, tensile modulus, hardness and elongation at break (EB) of NCB-phenolic resin composites were also investigated.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.438-438
• /
• 2012

은(Ag) 또는 금(Au) 입자를 촉매로 이용하여 습식식각을 통해 선택적으로 짧은 시간동안 단결정 실리콘 웨이퍼의 표면을 텍스쳐링하여 반사방지막 특성을 효과적으로 얻을 수 있다. 일반적으로 금속입자는 주로 금속 이온이 포함된 용액이나, 전기증착법을 통해서 실리콘 웨이퍼 표면에 형성시켰지만, 금속입자의 크기와 분포를 조절하기 어려웠다. 하지만, 최근 진공장비를 이용하여 열증발증착법(thermal evaporation)과 급속열처리법(rapid thermal annealing)을 통해서 금속입자를 대면적으로 크기와 분포를 균일하게 조절할 수 있다. 이러한 현상은 열적 비젖음(thermal dewetting) 현상에 의해 실리콘 표면위에 증착된 금속 박막으로부터 나노입자로 형성할 수 있다. 본 연구에서는 실리콘 (100)기판위에 다양한 크기의 은 또는 금 나노입자를 형성시켜 식각용액에 짧은 시간동안 담그어 식각하여, 텍스쳐링 효과와 반사방지(antireflection) 특성을 분석하였다. 실험을 위해 각각 은 또는 금 박막을 열증발증착법을 이용하여 ~3-8 nm의 두께로 형성시켰으며, 급속가열장치를 이용하여 $500^{\circ}C$에서 5분 동안 열처리하였다. 그리고 탈이온수(de-ionized water)에 불화수소와 과산화수소가 혼합된 식각용액에 1-5분 동안 습식식각을 하였다. 각각의 텍스쳐링 된 샘플의 식각의 상태와 깊이를 관찰하기 위해 field emission scanning electron microscopy (FE-SEM)을 이용하여 측정하였으며, UV-vis-NIR spectrophotometer를 이용하여 300 nm에서 1,200 nm의 반사특성을 분석하였다. 또한 RCWA (rigorous coupled wave analysis) 시뮬레이션을 이용하여 텍스쳐링 된 기하학적구조에 대하여 반사방지막 특성을 이론적으로 분석하였다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.11a
• /
• pp.112-112
• /
• 2009

In this study, the effect of a long post-deposition thermal annealing(600 and 1000 $^{\circ}C$) on the surface acoustic wave (SAW) properties of polycrystalline (poly) aluminum-nitride (AlN) thin films grown on a 3C-SiC buffer layer was investigates. The poly-AlN thin films with a (0002) preferred orientation were deposited on the substrates by using a pulsed reactive magnetron sputtering system. Experimental results show that the texture degree of AlN thin film was reduced along the increase in annealing temperature, which caused the decrease in the electromechanical coupling coefficient ($k^2$). The SAW velocity also was decreased slightly by the increase in root mean square (RMS) roughness over annealing temperature. However, the residual stress in films almost was not affect by thermal annealing process due to small lattice mismatch different and similar coefficient temperature expansion (CTE) between AlN and 3C-SiC. After the AlN film annealed at 1000 $^{\circ}C$, the insertion loss of an $IDT/AlN/3C-SiC/SiO_2/Si$ structure (-16.44 dB) was reduced by 8.79 dB in comparison with that of the as-deposited film (-25.23 dB). The improvement in the insertion loss of the film was fined according to the decrease in the grain size. The characteristics of AlN thin films were also evaluated using Fourier transform-infrared spectroscopy (FT-IR) spectra and X-ray diffraction (XRD), scanning electron microscopy (SEM), and atomic force microscopy (AFM) images.