• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.67 no.12
• /
• pp.1626-1632
• /
• 2018

In this paper, we describe the fabrication and characterization of a hydrogen peroxide ($H_2O_2$) sensor based on palladium and copper (PdCu) electroplated laser induced graphene (LIG) electrodes. $CO_2$ laser was used to form LIG electrodes on a PI film. This fabrication method allows simple control of the LIG electrode size and shape. The PdCu was electrochemically deposited on the LIG electrodes to improve the electrocatalytic reaction with $H_2O_2$. The electrochemical performance of this sensor was evaluated in terms of selectivity, sensitivity, and linearity. The physical characterization of this sensor was conducted using scanning electron microscopy (SEM) and energy-dispersive X-ray spectroscopy (EDS), which confirmed that PdCu was formed on the laser induced graphene electrode. In order to increase the sensor sensitivity, the Pd:Cu ratio of the electroplated PdCu was varied to five different values and the condition of highest amperometric current at an identical of $H_2O_2$ concentration was chosen among them. The resulting amperometric current was highest when the ratio of Pd:Cu was 7:3 and this Pd;Cu ratio was employed in the sensor fabrication. The fabricated PdCu/LIG electrode based $H_2O_2$ sensor exhibited a sensitivity of $139.4{\mu}A/mM{\cdot}cm^2$, a broad linear range between 0 mM and 16 mM of $H_2O_2$ concentrations at applied potential of -0.15 V, and high reproducibility (RSD = 2.6%). The selectivity of the fabricated sensors was also evaluated by applying ascorbic acid, glucose, and lactose separately onto the sensor in order to see if the sensor ourput is affected by one of them and the sensor output was not affected. In conclusion, the proposed PdCu/LIG electrode based $H_2O_2$ sensor seems to be suitable $H_2O_2$ sensor in various applications.

• Korean Journal of Metals and Materials
• /
• v.56 no.12
• /
• pp.885-892
• /
• 2018

Molybdenum disulfide ($MoS_2$) based electrocatalysts have been proposed as substitutes for platinum group metal (PGM) based electrocatalyst to hydrogen evolution reaction (HER) in water electrolysis. Here, we studied $MoS_2/CNFs$ hybrid catalyst prepared by electrospinning method with heat treatment for polymer electrolyte membrane(PEM) water electrolysis to improve the HER activity. The physicochemical and electrochemical properties such as average diameter, crystalline properties, electrocatalitic activity for HER of synthesized $MoS_2/CNFs$ were investigated by the Scanning Electron Microscope (SEM), X-ray Diffraction (XRD), X-ray Photoelectron Spectroscopy (XPS), Transmission Electron Microscopy (TEM), Raman Spectroscopy (Raman) and Linear Sweep Voltammetry (LSV). The as spun ATTM/PVP nanofibers were prepared by sol-gel and electrospinning method. Subsequently, the $MoS_2/CNFs$ was dereived from reduction heat treatment of ATTM at the ATTM/PVP nanofibers and carbonization heat treatment. Synthesized $MoS_2/CNFs$ electrocatalyst had an average diameter of $179{\pm}30nm$. We confirmed that the $MoS_2$ layers in $MoS_2/CNF$ electrocatalyst consist of 3~4 layers from the Raman results. In addition, We confirmed that the $MoS_2$ layers in $MoS_2/CNF$ catalyst consist of 7.47% octahedral 1T phase $MoS_2$, 63.77% trigonal prismatic 2H phase $MoS_2$ with 28.75% $MoO_3$ through the XRD, Raman and XPS results. It was shown that $MoS_2/CNFs$ had the overpotential of 0.278 V at $10mA/cm^2$ and tafel slope of 74.8 mV/dec in 0.5 M sulfuric acid ($H_2SO_4$) electrolyte.

• Journal of Embryo Transfer
• /
• v.25 no.3
• /
• pp.145-148
• /
• 2010

Oxygen consumption has been regarded as a useful indicator for assessment of mammalian embryo quality. This study was performed to investigate whether oxygen consumption reflects morphological grade of in vivo derived bovine blastocyst-stage embryos (blastocyst). The oxygen consumption of in vitro produced blastocyst was compared to its total cell number. In addition, pregnant rate was measured after transplantation of in vivo blastocysts with different oxygen consumption. The quality of blastocyst collected on day 7 after artificial insemination was categorized as grade I and II (G I and G II) based on microscopic observation of the morphology. Oxygen consumption of blastocyst was measured using a scanning electrochemical microscopy (SECM) and total cell number of in vitro blastocyst was enumerated by counting cells stained by propidium iodide. Pregnancy of recipient cow was confirmed with rectal palpation after 60 days of embryo transfer. The oxygen consumptions of G I blastocysts were significantly higher than those of G II blastocysts ($10.2{\times}10^{15}/mol\;s^{-1}$ versus $6.4{\times}10^{15}/mol\;s^{-1}$, p<0.05). Total cell numbers of in vitro blastocysts were 74.8, 90.7, and 110.2 in the oxygen consumption of below 10.0, 10.0~12.0, and over $12.0{\sim}10^{15}/mol\;s^{-1}$ respectively. Total cell number was significantly increased in embryos with high oxygen consumption (p<0.05). Pregnant rate in recipient cow was 0, 50, and 85.7% in the transplantation of embryo with the oxygen consumption of below 10.0, 10.0~12.0, and over $12.0{\times}10^{15}/mol\;s^{-1}$, respectively. These results suggest that measurement of oxygen consumption may help increase the pregnant rate of bovine embryos.