• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.9
• /
• pp.2023-2030
• /
• 2010

In this paper, we present research results of developing high performance scan conversion unit and implementing it on FPGA chip. To increase performance of scan conversion unit, we propose an architecture of scan converter that is a SIMD architecture and uses tile-based traversing method. The proposed scan conversion unit can operate about 124Mhz clock frequency on Xilinx Vertex4 LX100 device. To verify the scan conversion unit, we also develop shader unit, texture mapping unit and $240{\times}320$ color TFT-LCD controller to display outputs of the scan conversion unit on TFT-LCD. Because the scan conversion unit implemented on FPGA has 311Mpixels/sec pixel rate, it is applicable to desktop pc's 3d graphics system as well as mobile 3d graphics system needing high pixel rates.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2005.11a
• /
• pp.173-176
• /
• 2005

본 논문에서 영역 분할을 기반으로 하는 새로운 scan rate of-conversion 기법을 제안한다. 제안하는 공간적 보간 방법과 기존의 시간적 보간 방법을 이용하여 시공간 보간을 한다. 제안된 방법에서는 먼저 분수령 알고리즘을 이용한 영역 분할하고, 분할된 영역을 기반으로 하여 영역간의 에지 방향성을 결정한다. 기존 알고리즘과 같이 화소간 값 차이를 이용하여 에지의 방향을 구하지 않고 분할된 영역에서 영역구분에 따른 방향에 따라 보간을 함으로써 에지를 유지하면서 scan rate up-conversion을 할 수 있다.

• Proceedings of the IEEK Conference
• /
• 2003.07e
• /
• pp.2040-2043
• /
• 2003

General-purpose MPEG-2 video transcoders must be able to achieve any conversion between 18 ATSC (Advanced television system committee) video formats for DTV (digital television), e.g., scan format, size format, and frame rate format conversion. Especially, scan format conversion is hard to implement because frame rate and size format conversion often happen together. This paper proposes a fast motion estimation(ME) algorithm for MPEG-2 video transcoding supporting scan format conversion. Firstly, we extract and compose a set of candidate motion vectors (MV's) from the input bit-stream to comply with the re-encoding format. Secondly, the best MV is chosen among several candidate MV's by using a weighted median selector. Simulation results show that the proposed ME algorithm reduces significantly transcoding complexity with a minor PSNR degradation.

• Proceedings of the IEEK Conference
• /
• 2000.11b
• /
• pp.71-74
• /
• 2000

The purpose of format conversion is to convert a wide range of personal computer video formats into a target format. Circuits for the conversion have been developed by means of interpolation techniques, such as zero-order interpolation, bilinear interpolation, and bisigmoidal interpolation. This paper proposes a scan converter using cubic splines. The converter was modeled in VHDL on Max+PlusII and implemented with an FPGA chip. The circuit gives much better conversion performance than a scan converter with zero-order or linear interpolation.

• Journal of the Korea Society for Simulation
• /
• v.9 no.4
• /
• pp.11-23
• /
• 2000

The purpose of format conversion is to convert a wide range of personal computer video formats into a target format. Circuits for the conversion have been developed by means of interpolation techniques, such as zero-order interpolation, bilinear interpolation, and bisigmoidal interpolation. This paper proposes a scan converter using cubic splines. The converter was modeled in VHDL, simulated on Max+plus Ⅱ , and implemented with an FPGA chip. The circuit gives much better conversion performance than a scan converter with zero-order or linear interpolation techniques according to simulation results and implementation.

• Proceedings of the Korea Society for Simulation Conference
• /
• 2000.04a
• /
• pp.91-95
• /
• 2000

The purpose of format conversion is to convert a wide range of personal computer video formats to a target format. Circuits for the conversion has been developed by means of interpolation techniques, such as zero-order interpolation, bilinear interpolation, and bisigmoidal interpolation. This paper proposes a scan converter using cubic splines. The converter was modeled in VHDL on Max+Plus II and implemented with an FPGA cpip. The circuit gives much better conversion performance than a scan converter with zero-order or linear interpolation.

• Journal of Broadcast Engineering
• /
• v.8 no.3
• /
• pp.288-296
• /
• 2003

ATSC (Advanced Television System Committee) has specified 18 video formats for DTV (Digital Television), e.g., scan format, size format, and frame rate format conversion. Effective MPEG-2 video transcoders should support any conversion between the above-mentioned formats. Scan format conversion Is hard to Implement because it may often induce frame rate and size format conversion together. Especially. because of picture type conversion caused by scan format conversion, the computational burden of motion estimation (ME) in transcoding becomes serious. This paper proposes a fast ME algorithm for MPEG-2 video transcoding supporting scan format conversion. Firstly, we extract and compose a set of candidate motion vectors (MVs) from the input bit-stream to comply with the re-encoding format. Secondly, the best MV is chosen among several candidate MVs by using a weighted median selector. Simulation results show that the proposed ME algorithm provides outstanding PSNR performance close to full search ME, while reducing the transcoding complexity significantly.

• Korean Journal of Veterinary Service
• /
• v.45 no.1
• /
• pp.39-45
• /
• 2022

The total bacteria count is significantly important factor for hygienic quality in raw milk. BactoScan FM^TM and BactoCount IBC^TM are the automated instruments for the determination of the total bacterial count in raw milk. They have been used after calibration by standard plate count (SPC) method in South Korea since 2000. It is necessary to re-evaluate for total bacterial counter according to the improvement of milk quality and the change of milk quality grade. Therefore, this study was evaluated the conversion mode of the two machines by SPC method. We collected 921 bulk-tank milk samples throughout the concentration range of 1,000~1,000,000 CFU/mL from June 2020 to October 2021. As a result, when compared by the SPC value, there was a slight difference in total bacterial count in BactoScan below 10,000 CFU/mL and above 200,000 CFU/mL and in BactoCount above 100,000 CFU/mL, respectively. Therefore, the conversion factor for BactoScan and the conversion equation for BactoCount were newly adjusted based on SPC value, and then the correlation coefficients (R²) was 0.85 or higher. In addition, the correlation (R²) between BactoScan and BactoCount was 0.91, which means the results were high positive correlation. These results are expected to contribute to improving the accuracy of the automated instruments for determining of total bacterial count in raw milk.

• Journal of Biomedical Engineering Research
• /
• v.22 no.4
• /
• pp.339-347
• /
• 2001

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.21 no.5
• /
• pp.1155-1171
• /
• 1996

In this paper, we have analized the characteristics of pseudomedian filter based on the preceding study. The proposed pseudomedian filter methods consist of two types, that are H-shaped and Asterisk-shaped window types. At first, the definition of pseudomedian filter and its algorithm for de-interlacing scan conversion have been descibed, especially its charateristics, this, is the edge preserving characteristics and the required computation have been compared with the conventional algorithms. And PSNR has been introduced to evaluate the pseudomedian filter methods and the conventional algorithms. Finally, it has been discussed on the features and trade off of the pseudomedian filter methods. And the merit and application fields of the pseudomedian filter methods have been discussed.