• Structural Engineering and Mechanics
• /
• v.50 no.1
• /
• pp.89-103
• /
• 2014

According to experimental studies made so far, design formula of shear characteristics suggested by ISO 22762 and JEAG 4614, representative design code for Lead Rubber Bearing(LRB) shows dependence caused by changes in compressive stress. Especially, in the case of atypical special structure, such as a nuclear power structure, placement of seismic isolation bearing is more limited compared to that of existing structures and design compressive stress is various in sizes. As a result, there is a difference between design factor and real behavior with regards to shear characteristics of base isolation device, depending on compressive stress. In this study, a full-scale low hardness device of LRB, representative base isolation device was manufactured, analyzed, and then evaluated through an experiment on shear characteristics related to various compressive stresses. With design compressive stress of the full-scale LRB (13MPa) being a basis, changes in shear characteristics were analyzed for compressive stress of 5 MPa, 10 MPa, 13 MPa, 15 MPa, and 20 MPa based on characteristics test specified by ISO 22762:2010 and based on the test result, a regression analysis was made to offer an empirical formula. With application of proposed design formula which reflected the existing design formula and empirical formula, trend of horizontal characteristics was analyzed.

• Journal of the Korean earth science society
• /
• v.24 no.6
• /
• pp.558-567
• /
• 2003

The regional dependency of cloud-radiative forcing at the top of atmosphere is studied using ERBE (Earth Radiation Budget Experiment), ISCCP (International Satellite Cloud Climatology Project) and NCEP/NCAR (National Centers for Environmental Prediction/National Center for Atmospheric Research) reanalysis data for 60 months from January 1985 to December 1989 over tropical ocean. In the interannual time scale, the dependency of cloud-radiative forcing on the sea surface temperature over the equatorial eastern Pacific ocean is about 7.4Wm$^{-2}$K$^{-1}$ for longwave radiation and about -4.4Wm$^{-2}$K$^{-1}$ for shortwave radiation, respectively. This shows that the net cloud-radiative forcing due to the increase of sea surface temperature over the equatorial eastern Pacific ocean heats the atmosphere. But the dependency is reversed over tropical oceans with -3.4Wm$^{-2}$K$^{-1}$ for longwave and 1.9WmWm$^{-2}$K$^{-1}$ for shortwave radiation, indicating that the net cloud-radiative forcing cools the atmosphere over tropical oceans. In raw data including seasonal cycle, the dependency of cloud-radiative forcing over the equatorial eastern Pacific ocean is very similar to that in interannual time scale in both the magnitude and the sign. But the dependency of cloud-radiative forcing on the sea surface temperature over tropical oceans is about 0.2Wm$^{-2}$K$^{-1}$ for longwave and 2.7Wm$^{-2}$K$^{-1}$ for shortwave radiation, respectively. These results represent that the role of seasonal cycle on the cloud radiative forcing is gradually more important than role of interannual time scale as the ocean area is broadening from the tropical central Pacific to the tropical ocean.

• Wind and Structures
• /
• v.11 no.4
• /
• pp.291-302
• /
• 2008

Three-dimensional engineering simulations of momentum-driven tornado-like vortices are conducted to investigate the flow dynamics dependency on swirl ratio and the possible relation with real tornado Fujita scales. Numerical results are benchmarked against the laboratory experimental results of Baker (1981) for a fixed swirl ratio: S = 0.28. The simulations are then extended for higher swirl ratios up to S = 2 and the variation of the velocity and pressure flow fields are observed. The flow evolves from the formation of a laminar vortex at low swirl ratio to turbulent vortex breakdown, followed by the vortex touch down at higher swirls. The high swirl ratios results are further matched with full scale data from the Spencer, South Dakota F4 tornado of May 30, 1998 (Sarkar, et al. 2005) and approximate velocity and length scales are determined.

• Advances in materials Research
• /
• v.7 no.1
• /
• pp.1-16
• /
• 2018

Thermal bifurcation buckling behavior of fully clamped Euler-Bernoulli nanobeam built of a through thickness functionally graded material is explored for the first time in the present paper. The variation of material properties of the FG nanobeam are graded along the thickness by a power-law form. Temperature dependency of the material constituents is also taken into consideration. Eringen's nonlocal elasticity model is employed to define the small-scale effects and long-range connections between the particles. The stability equations of the thermally induced FG nanobeam are derived via the principal of the minimum total potential energy and solved analytically for clamped boundary conditions, which lead for more accurate results. Moreover, the obtained buckling loads of FG nanobeam are validated with those existing works. Parametric studies are performed to examine the influences of various parameters such as power-law exponent, small scale effects and beam thickness on the critical thermal buckling load of the temperature-dependent FG nanobeams.

• Structural Engineering and Mechanics
• /
• v.71 no.1
• /
• pp.37-43
• /
• 2019

This paper studies application of modified couple stress theory and first order shear deformation theory to magneto-electro-mechanical vibration analysis of three-layered size-dependent curved beam. The curved beam is resting on Pasternak's foundation and is subjected to mechanical, magnetic and electrical loads. Size dependency is accounted by employing a small scale parameter based on modified couple stress theory. The magneto-electro-mechanical preloads are accounted in governing equations to obtain natural frequencies in terms of initial magneto-electro-mechanical loads. The analytical approach is applied to investigate the effect of some important parameters such as opening angle, initial electric and magnetic potentials, small scale parameter, and some geometric dimensionless parameters and direct and shear parameters of elastic foundation on the magneto-electro-elastic vibration responses.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.25 no.6
• /
• pp.533-540
• /
• 2012

Rubber laminated bearings with lead core are highly affected by changes in temperature because key materials which are rubber and lead have temperature dependencies. In this study, two full scale LRB(D800, S=5) are manufactured and temperature dependency tests on shear properties are accomplished. The shear properties at the 3rd cycle are used at $-10^{\circ}C$, $0^{\circ}C$, $10^{\circ}C$, $20^{\circ}C$, $30^{\circ}C$, $40^{\circ}C$ respectively. The double shear configuration, simultaneously testing two pieces, is applied for compression shear test in order to minimize the friction effects due to the test machine, described in ISO 22762-1:2010. Characteristic strength, post-yield stiffness, effective stiffness, equivalent damping ratio are estimated and presented coefficient due to the temperature changes.

• Proceedings of the Korea Society for Simulation Conference
• /
• 2002.05a
• /
• pp.239-242
• /
• 2002

멀티미디어 환경에서 많은 패킷 스위치 네트워크로부터 발생되는 트래픽은 burstiness성질이 상당히 넓은 범위의 time scale상에 존재하고, 트래픽 특성이 self-similar현상을 보이고 있다는 것이 알려지고 있다. 본 논문에서는 Shared-Buffer를 이용한 ATM 스위치 buffer관리방법을 적용하여 입력포트에 self-similar 트래픽이 들어올 때 출력포트의 long-range dependency의 변화를 분석하며 아울러 큐잉 지연, 셀 손실률 그리고 이용도(utilization)등이 self-similar 트래픽에 미치는 영향을 분석할 것이다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2001.05a
• /
• pp.35-44
• /
• 2001

As one of advanced uses of radar, a physically based rainfall prediction method which uses a conceptual rainfall model assimilated by information from volume scanning radar is shown. As another example of advanced utilization of weather radar, results from analyzing a hierarchical time-scale structure in dependency of rainfall distribution en topography are shown.

• Journal of Digital Convergence
• /
• v.10 no.1
• /
• pp.335-339
• /
• 2012

Software configuration management is a field of managing sets of large scale software outputs to be the basis of the software products. Configuration management has significantly improved for the past few years, yet new system is still required. Instead of using previous methods or researching about configuration management, professional management of developing project is needed. Therefore, techniques such as storage model for configuration management, management program for change procedure and management of program interface is needed. In this paper, we provide storage for configuration management and implement decision-making system to manage divided program and interface. Thus, we propose a new access method by the configuration management dependency. This paper provides configuration management for developing software to verify and classify using decision-making system for the change and combination of independent components with high dependency.

• Journal of KIISE:Software and Applications
• /
• v.37 no.5
• /
• pp.394-402
• /
• 2010

JavaScript is one of the most popular languages to develope web sites and web applications. Since applicationss written in JavaScript are sent to clients as the original source code, they are easily exposed to plagiarists. Therefore, a method to detect plagiarized JavaScript programs is necessary. The conventional program dependency graph(PDG) based approaches are not suitable to analyze JavaScript programs because they do not reflect dynamic features of JavaScript. They also generate false positives in some cases and show inefficiency with large scale search space. We devise a JavaScript specific PDG(JS PDG) that captures dynamic features of JavaScript and propose a JavaScript plagiarism detection method for precise and fast detection. We evaluate the proposed plagiarism detection method with experiment. Our experiments show that our approach can detect false-positives generated by conventional PDG and can prune the plagiarism search space.