• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.8 no.2
• /
• pp.310-323
• /
• 2004

In this paper, we extend the multiple time scale control framework to window-based congestion control, in particular, TCP This is performed by interfacing TCP with a large tine scale control nodule which adjusts the aggressiveness of bandwidth consumption behavior exhibited by TCP as a function of "large time scale" network state. i.e., conformation that exceeds the horizon of the feedback loop as determined by RTT Our contribution is threefold. First, we define a modular extension of TCP-a function call with a simple interface-that applies to various flavors of TCP-e.g., Tahoe, Reno, Vegas and show that it significantly improves performance. Second, we show that multiple time scale TCP endows the underlying feedback control with preactivity by bridging the uncertainty gap associated with reactive controls which is exacerbated by the high delay-bandwidth product in broadband wide area networks. Third, we investigate the influence of three traffic control dimensions-tracking ability, connection duration, and fairness-on performance. Performance evaluation of multiple time scale TCP is facilitated by a simulation bench-mark environment which is based on physical modeling of self-similar traffic.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.24 no.2
• /
• pp.131-135
• /
• 2011

We have been studied the effects of oxidant on the properties of Sr-ferrite magnets using mill scale for motor. The small-added (0.5 wt%) $NaNO_3$ oxidant improved significantly the degree of oxidation and the grindability of mill scale, and then highly enhanced the magnetic properties of anisotropic Sr-ferrite sintered magnets; such as the remanent flux density from 3.55 to 3.80 kG, the intrinsic coercivity from 2.75 to 3.22 kOe, and the maximum energy product from 2.90 to 3.45 MGOe.

• New & Renewable Energy
• /
• v.2 no.2 s.6
• /
• pp.118-125
• /
• 2006

The target of this work was the process development of demonstration plant to produce the high quality alternative fuel oil by the pyrolysis of mixed plastic waste. In the first step of research, the bench-scale units of 70 t/y and the pilot plant of 360 t/y had been developed. Main research contents in this step were the process performance test of pilot plant of 360 ton/year and the development of demonstration plant of 3,000 t/y, which was constructed at Korea R & D Company in Kimjae City. The process performance of pilot plant of 360 t/y showed about 80% yield of liquid product, which was obtained by both light gas oil(LGO) and heavy gas oil(HGO), The boiling point range distribution of LO product that was mainly consisting of olefin components in PONA group appeared at between that of commercial gasoline and kerosene. On the other hand, HO product was mainly paraffin and olefin components and also appeared at upper temperature distribution range than commercial diesel. Gas product showed a high fraction of $C_3\;and\;C_4$ product like LPG composition, but also a high fraction of $CO_2$ and CO by probably a little leak of process.

• Journal of Internet Computing and Services
• /
• v.6 no.5
• /
• pp.111-121
• /
• 2005

As the scale of e-commerce has been increasing, information about products and service become diversified, Most current internet shopping mall. however, provides product information to consumers in collective arrangement. thus they devote a lot of efforts and time to select the product they want, In this paper, as providing consumers convenient interfaces adapting feature inquirer and parallel coordinate, a method for selecting a right product through searching the wanted products easily and comparing their features efficiently has been proposed. To evaluate the efficiency of the method proposed in this paper, several experiments to measure the time spent and the number of clicks of mouse taken in finding the product they want have been conducted. The results verify the effectiveness of the proposed method.

• Journal of Technology Innovation
• /
• v.14 no.2
• /
• pp.93-116
• /
• 2006

The purpose of this study is to contribute reference material that provides insight into innovative process management that increases R&D output in commercializing new products. A model of a process from research to commercialization with the cumulative profit and loss curve is put forward and hypotheses related to success and failure are developed at the stages up to product launch. Seventeen large projects that have resulted in successful product launches have been examined from the initial research stage to commercialization. Prefect duration, standardized cumulative R&D expenditures and research resource concentration are analyzed in terms of statistical method and patterns in cumulative profit and loss curves after product sales, as well as the reasons for and other aspects of success/failure are investigated and analyzed. Consequently, valuable information on future management tasks has been obtained such as: (1) project duration differs depending on market sectors, product types and presence/absence of materials research (2) cumulative profit and loss curves can be categorized into four patterns (3) reasons for failure can be divided into technological and market problem categories and (4) these factors have an impact on product sales.

• Journal of Global Scholars of Marketing Science
• /
• v.12
• /
• pp.99-119
• /
• 2003

A model is proposed for the role of emotional intensity of a web site, and the moderating influence of product involvement, in the Integrative Framework of persuasion (Meyers-Levy and Malvaiya 1999). The model also appropriately operationalizes the constructs emotional intensity of a web site and product involvement The three routes to persuasion, Central, Peripheral, and Experiential correspond to high, moderate, and low involvement (Meyers-Levy and Malaviya 1999). The involvement construct is measured from message recipients using the Personal Product Inventory (Pill, which was developed to capture the concept of product involvement (Zaichkowsky 1985). The conceptualization of the Personal Product Inventory is a contextrree measure that also has robust psychometric properties when applied to advertisements (Zaichkowsky 1994). The propositions highlight the expected importance of emotional intensity of a web site. The moderating influence of product involvement is also proposed. Specifically, what this work proposes is that the emotional intensity of a product site has a larger impact on attitude change under low product involvement, as opposed to moderate product involvement. Support for this reasoning can be found in the persuasion literature (Petty et al 1986). The Petty et al (1986) frame work is a dual process descriptive and predictive frame work in the area of altitude formation and change. Recently, Myers Levy and Malaviya (1999) have proposed a tri-process framework. This is in tum based on the dual process model of Petty et al. (1986). The study outlined in this paper aims to deepen the Meyers Levy and Malaviya (1999) and frame work. The propositions outlined in the model are empirically tested using a repeated measures experimental design. The emotional intensity is measured using a scale that is based on experts judgments. Using a paired comparison t-test two sites are determined to be of high and low emotional intensity. The model is tested using a repeated measures experimental design. The first independent variable Emotional Intensity of the site is manipulated. The Second independent variable, Personal Product Inventory is measured. While, the dependent variable, product altitude change will also be measured. Utilizing Analysis of Variance (ANOVA) the data is analyzed using SPSS. The results suggest that besides the rational content of messages their emotional content can also influence attitude change. Specifically, it is proposed that the manipulation of emotional intensity of a product Web site has a greater impact on product altitudes under high and low product involvement conditions, rather than moderate product involvement. However, the results for product involvement as a continuous variable has a p value of 0.09. Further, the results for three levels of product involvement were far from significant. For two levels of product involvement also, the results were insignificant, the p value approached 0.20. This evidence indicates that it is premature to conclude that there are three routes to persuasion. A caveat, however, must be added, in that the manipulations may not have been strong enough to test the proposed hypotheses. Further, undoubtedly, there is unequivocal evidence the emotional intensity of a product Web site, as measured here, has a direct impact on product attitudes.

• Journal of the Korea Convergence Society
• /
• v.8 no.7
• /
• pp.191-198
• /
• 2017

This study offers the possibility of a new integrated product of video technology and public culture content. The Development of 'the Urinal of Emotional Type with Screen' will introduce a new sanitary pottery product and it will be a new attempt to combine hygiene pottery product with high-tech electronic product. It is a product development idea that presents the new marketability of the sanitary pottery product with the improvement of awareness of the restroom and the idea of wit through public information notification and advertisement effect. For the commercialization of the product, the prototype will be made through a separate production process with the design of this project, through 3D rendering, 3D mockup and so on. Various product expansions can be consulted with manufacturers after that. It is a new approach of image making with high quality and differentiated pricing strategy, that targeting small-scale business, such as franchise coffee shops and liquor stores with high quality and differentiated pricing strategy, and it will lead the market trend with various marketing availability through differentiated video contents.

• Journal of Microbiology and Biotechnology
• /
• v.19 no.2
• /
• pp.167-171
• /
• 2009

The effects of culture conditions on succinic acid production and its possible scale-up have been studied. Mannheimia succiniciproducens LPK7, engineered for enhanced production of succinic acid and reduced by-product secretion, was used for the experiments. Mannheimia succiniciproducens LPK7 is a knock-out strain of wild type deficient in the ldhA, pflB, and pta-ackA genes, and is derived from Mannheimia succiniciproducens MBEL55E. Process optimization of factors including optimal temperature, pH, carbon source, and nitrogen source was performed to enhance the production of succinic acid in flasks. To observe scale-up effects, batch fermentation was carried out at various working volumes. At a working volume of 7.0 l, the final succinic acid concentration and yield were 15.4g/l and 0.86g/g. This result shows similar amount of succinic acid obtained in lab-scale fermentation, and it is possible to scale up to larger fermentors without major problems.

• KSBB Journal
• /
• v.24 no.1
• /
• pp.89-95
• /
• 2009

Biodiesel (fatty acid alkyl esters), which is produced from sustainable resources such as vegetable oil, animal fat and waste oils, have used to as substitutes for petro-diesel. In this study, we investigate the performance of 30 L and 300 L pilot-scale biodiesel production system using alkali-catalyst transesterification from soybean oil and rapeseed oil produced at Jeju island in Korea. The 30 L-scale biodiesel production was performed to in the condition of reaction temperature $65^{\circ}C$, catalyst amount 1% (w/w) and oil to methanol molar ratio 1 : 8. At that reaction condition, the fatty acid methyl ester contents of product are above 98% within reaction time 30 min. Also, the conversion yield of over 98% was obtained in 300 L-scale biodiesel production system using rapeseed oil and soybean oil. The quality of biodiesel produced from reaction system was satisfied to recommended quality standard of Korea. Our results may provide useful information with regard to the scale-up of more economic and efficient biodiesel production process.

• Journal of Distribution Science
• /
• v.19 no.3
• /
• pp.49-60
• /
• 2021

Purpose: This study aims to utilize geographic data to analyze how various retail formats of large-scale stores around the traditional market affect the performance of the traditional market in Seoul, Korea. Research design, data, and methodology: The two types of catchment areas were demarcated (circle of 1km radius and Thiessen polygon) for each traditional market, and the large-scale stores located within each catchment area were identified for 153 traditional markets in Seoul, Korea. Additionally, multiple regression analysis was utilized. Results: The results revealed that the influence on the performance of the traditional markets were different depending on the retail format of the large-scale stores. Large discount stores were found to have a negative effect on the sales and the visitors of traditional markets, whereas complex shopping malls and department stores had a positive effect on the traditional markets. Conclusions: As a result of the differences in the retail format such as product categories and leisure functions, the impact of some large-scale stores on the traditional market may have a greater agglomeration effect than the consumer churn effect. Therefore, it is suggested that in the regulation of these large-scale stores, the differences in retail format should be considered for the future.