• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.10
• /
• pp.1283-1288
• /
• 2012

A process heat exchanger (PHE) in a nuclear hydrogen system is a key component for transferring the considerable heat generated in a very high temperature reactor (VHTR) to a chemical reaction that yields a large quantity of hydrogen. A performance test on a medium-scale PHE prototype made of $Hastelloy^{(R)}$-X is scheduled in a small-scale gas loop at the Korea Atomic Energy Research Institute. In this study, as a preliminary study before carrying out the performance test in the gas loop, high-temperature structural analysis modeling and macroscopic thermal and structural analysis of the medium-scale PHE prototype by imposing the established displacement boundary constraints were carried out under the gas loop test condition. The results obtained in this study will be compared with the performance test results of the medium-scale PHE prototype in the gas loop.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.10
• /
• pp.6056-6065
• /
• 2014

The aim of this study was to develop a scale of the Korea citizen's intentionality out of their inborn ability and mission. To set up the concept of the above intentionality, there have been many academic and religious studies for reference in addition to the existing productivity, Korea elderly successful aging scale, and the scale of life qualities for review. The first 57 items for questionnaires were created thereafter. The final 27 items were confirmed, which were constantly modified by a professor of statistics and corresponding author in effective response and in removing the redundant items after the first items had been reduced to 44 preliminary items through the many an item-by-item discussions with pastors, theologians and social workers. A survey was conducted around the metropolitan area and 380 records were collected. Factor analysis to verify the validity of the measurement tool was completed, and showed that there were 6 sub-factors; "recognition of being", "autonomous life", "self-completion", "initiative", "acceptance", and "economic feasibility". In addition, reliability analysis was implemented and found to be reliable because the Cronbach's ${\alpha}$ value was 0.6 or more.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2009.10a
• /
• pp.169-172
• /
• 2009

Multiple scale modeling has been applied to predict defect shape change during the wire rod rolling process. The size difference between bloom and defect prevent using usual FEM approaches due to the enormous number of elements required to depict the defect. The newly developed multiple scale model can visualize defect shape changes during the multi stands rolling process. The defect positioned at the top and side of bloom are smoothed out but the one at the middle evolved as folding or remained as crack. This approach can be used for defect control with roll shape design and initial bloom shape.

• The KSFM Journal of Fluid Machinery
• /
• v.19 no.3
• /
• pp.33-36
• /
• 2016

The investigation on the verification of availability simulation for small-scale plant has been carried out. This study focuses on the availability variation induced by number of equipment and iteration with failure density function. The equipment classification of small-scale plant and failure type and the methodologies on Monte-Carlo simulation are established. The availability deviation with programs showed under Max. 1.7% for the case of normal function. This method could be used to availability evaluation of small-scale plant, but calibration of the failure density function is necessary for general application.

• Transactions of Materials Processing
• /
• v.20 no.1
• /
• pp.36-41
• /
• 2011

Meso-scale or micro-scale forming of sheet metal parts has been recently considered as one of the important forming technologies with growing demand on meso/micro products for electric or medical devices. Experimental investigation on the cylindrical meso-cup drawing with hemispherical punch is carried out to examine the limit drawing ratio and thickness distribution of drawn cups. The working parameters chosen in this study are blank diameter, die-corner radius and blankholding force. It is found from the experiments that the limit drawing ratio of 2.4 can be achieved in the case of hemispherical cup drawing and uniform thickness distribution in wider region can be obtained compared with the results of conventional cup drawing.

• Journal of Ocean Engineering and Technology
• /
• v.21 no.3 s.76
• /
• pp.26-32
• /
• 2007

A series of large-scale experiments were carried out in order to examine wave-induced liquefaction in a loosely packed sandbed, its afterward high densification and liquefaction by oscillatory pore pressure. The experiments were conducted in a Large Hydro-Geo Flume that can nearly solve the problems of scale effects of the sandbed, and the 50% sieve diameter of sand was 0.2 mm. The generation of residual pore pressure and its afterward high densification which had observed by Takahashi et al. (1999) in a wave flume experiment using fine sand with the size of 0.08 mm. As a result, the relative density of the sandbed after high densification was increased up to 79% and liquefaction by oscillatory pore pressure was not observed.

• Korean Institute of Interior Design Journal
• /
• no.12
• /
• pp.100-108
• /
• 1997

A human body can be called the scale of all things and the most perfect and sensual presentation of form. Its beautiful proportion has been used as the most important measure of all the natural organic beings. The attitude of research based on the human scale is so traditional both in East and West, and especially in the field of architecture. It has been the ground of most standards in various buildings and cities from the ancient times. This study aims to examine the way the human body has been investigated in history and to find out how it is applied and expressed as the scale in architecture or interior spaces. It takes a step forward from mere research of proportion by studying even the emotional and psychological relations between space and human beings. It may contribute to the creation of the space for human beings.

• Journal of the Korean Society for Precision Engineering
• /
• v.25 no.2
• /
• pp.88-95
• /
• 2008

With society focusing more and more on environmental issues, the recycling of materials of all types has become an important concern. In this paper, optimization method is developed for reducing cost and improving quality in mill scale recycling. An experimental investigation into the process parameter effects is presented to determine the optimum configuration of parameters for performance, quality and cost. Taguchi's optimization approach was used to obtain the optimal parameters. The significant parameters were identified and their effects on mill scale recycling were studied. As a results, a confirmation experiment with the optimal levels of process parameters was carried out in order to demonstrate the effectiveness of the Taguchi method.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.11b
• /
• pp.687-692
• /
• 2002

In order to verify the effectiveness of adding visooelastic dampers to full-scale steel frame structure on the reduction of their seismic and wind response a experimental work was carried out. First, The test was conducted on the VE dampers subjected to sinusoidal excitations under a variety of ambient temperatures, frequency, and the damper strain. Results from these tests showed that the viscoelastic dampers have high energy dissipation capacity. Second, The vibration tests was conducted of the full-scale steel frame structure with md without added VE dampers at different temperatures. Viscoelastically damped full-scale structure test result on the effect of ambient temperature show that viscoelastic dampers are very effective in reducing excessive vibration of the structure due to sinusoidal excitation over a wide ringe of ambient temperature.

• 한국연소학회:학술대회논문집
• /
• 2007.05a
• /
• pp.155-160
• /
• 2007

This study was conducted to find out the chlorine removal characteristics of waste plastic mixture by pyrolysis process with thermogravimetric analysis(TGA) and a lab-scale pyrolyzer. The material used as plastic wastes were PE (Poly-ethylene), PP (Poly-prophylene), and PVC (Poly Vinyl Chloride). Experimental procedure were composed of three steps; 1st step: TGA of PVC, PP and PE, 2nd step: chlorine removal rate of PVC in a lab-scale pyrolyzer, 3rd step: chlorine removal rate of PVC-PE and PVC-PP mixture in a pyrolyzer. Through the results of TGA, we can estimate the basic pyrolysis characteristics of each plastic, and then we can also derive the design parameters and operating conditions of the lab-scale pyrolyzer. The results can be used as primary data for designing a system to produce RPF (Refuse Plastic Fuel), a waste incinerator and a pyrolysis/gasification process.