• Proceedings of the Earthquake Engineering Society of Korea Conference
• /
• 2006.03a
• /
• pp.545-552
• /
• 2006

Small-scale models have been frequently used for seismic performance tests because of limited testing facilities and economic reasons. However, there are not also enough studies on similitude law for analogizing prototype structures accurately with small-scale models, although conventional similitude law based on geometry similitude is not well consistent in their inelastic seismic behaviors. When fabricating prototype and small-scale model of reinforced concrete structures by using the same material, added mass is demanded from a volumetric change and scale factor could be limited due to aggregate size. Therefore, it is desirable to use different materials for small-scale model. In our recent study, a modified similitude law was derived depending on geometric scale factor, equivalent modulus ratio and ultimate strain ratio. And quasi-static and pseudo-dynamic tests on the specimens are carried out using constant and variable modulus ratios, and correlation between prototype and small-scale model is investigated based on their test results. In this study, tests on scaled model of different concrete compressive strength aye carried out. In shaking table tests, added mass can not be varied. Thus, constant added mass on expected maximum displacement was applied and the validity was verified in shaking table tests. And shaking table tests on non-artificial mass model is carried out to settle a limitation of acceleration and the validity was verified in shanking table tests.

• Journal of Industrial Technology
• /
• v.24 no.B
• /
• pp.47-57
• /
• 2004

This study is aiming to obtain the pabulum of architectural planning about out-patient clinic department in armed force hospital with search. The discussion was about characteristic problems and differentiated planning characteristics of common general hospital, So the conclusion of research is as follows. In army medical facilities, Because of architectural standard of out-patient clinic department about scale of facilities and characteristic in each examination-part is unprepared, it may have to be readied. Out-patient clinic department was become plan to scale about whole 7~8% in hospital to SB hospital in 95 but was planed about 5% of whole scale from PS hospital in 97. When plan hospital, increase of equipment and increase of module size about bed for the convenience of patient or employees are judged for cause in hospital since 97 years than previous hospital in 95.

• Proceedings of the Korean Geotechical Society Conference
• /
• 1993.10a
• /
• pp.29-32
• /
• 1993

Presengly reinforced earth is widely utilized for earth structure increasingly not only domestic but also in many foreign countries because of its rapidity of construction and economic merits. The study on the reinforced earth has been actively carried out and enlarged in the theoretical aspect. But it has many problems to the application of the field. In this study large scale Pull-out Test was used to analyze reinforced earthe behavior considering deformation character of reinforced earth under the similar condition to the field.

• Smart Media Journal
• /
• v.6 no.3
• /
• pp.75-82
• /
• 2017

Recently, the marine monitoring technology is actively being studied since the sea is a rich repository of natural resources that is taken notice in the world. In particular, the marine environment data should be collected continuously in order to understand and analyze the marine environment, however the study of automatic monitoring of marine environment in Korea is not enough. In this paper, we proposed the marine environment monitoring system based on open source. The proposed system can be designed as a scale out system using Hadoop based time series database which it can easily process the increasing collection data by a scale out computer resources. It can also be used to analyze marine data by visualizing collected data.

• Proceedings of the KSME Conference
• /
• 2004.11a
• /
• pp.1592-1597
• /
• 2004

Experimental studies were carried out to confirm the turbulent enhancement of the cooling system of nuclear reactor by large scale vortex generation in nuclear fuel rod bundle. The large scale vortex motions were generated by rearranging the inclination angles of mixing vanes to the coordinate directions. Experimental studies were carried out at Reynolds Number 60,000 with hydraulic condition. Normal variations of mean velocity and turbulent intensity in the rod bundle subchannel were measured by the 2-color LDV measurement system. The turbulence generated by split mixing vanes has small length scales so that they maintain only about 10DH after the spacer grid. On the other hand, the turbulences generated by the large scale vortex continue more and remain up $25D_{H}$ after the spacer grid.

• Steel and Composite Structures
• /
• v.8 no.5
• /
• pp.361-388
• /
• 2008

The Eurocode 4 presents some negative aspects in the design of composite slabs by the m-k Method or the Partial Connection Method. On one hand, the component chemical adherence is not accounted for in the connection between the profiled steel sheet and the concrete. On the other hand, the application of these methods requires some fitting parameters that must be determined by full scale tests. In this paper, the Eurocode 4 methods are compared with a method developed at the Federal Polytechnic School of Lausanne, based on pullout tests, which can be a valid alternative. Hence, in order to calculate the necessary parameters for the three methods, several tests have been performed such as the full scale test described in Eurocode 4 and pull-out tests. This last type of tests is of small dimensions and implicates lower costs. Finally, a full-scale test of a steel-concrete composite slab with a generic loading is presented, with the goal of verifying the analytical formulation.

• The Journal of the Korea Contents Association
• /
• v.18 no.2
• /
• pp.248-261
• /
• 2018

This study, the Fear of Missing Out Scale (FoMO Scale) developed by Przybylski et al. (2013) was adapted and validated to the Korean culture. 3-factors were constructed through EFA and item content analysis. In the CFA, 3 models were constructed to verify the fit of the model. Compared the goodness of fit, 3-factors model with 8 items proved to be the most appropriate. Sub-factors extracted through the characteristic context and rationale of Korean culture are 'belonging needs', 'extrinsic motivation', and 'relative deprivation'. K-FoMO scale and the reliability level of each sub-factor were good. Convergent validity was assessed by significant correlation the K-FoMO scores with life satisfaction, positive emotions, negative emotions, and SNS addiction proneness. Discriminant validity was assessed by low correlation with gratitude. At the end, limitation and suggestions for the future research were discussed.

• 한국기계연구소 소보
• /
• s.9
• /
• pp.183-191
• /
• 1982

This report describes the analysis method of the full-scale propulsive performance by using the data of model test and the full-scale speed trial. The model test data were analyzed by the computer program "PPTT" based on "1978 ITTC Performance Prediction Method for Single Screw Ships." Also the full-scale speed trial data were analyzed by the computer program "SSTT" based on the newly proposed “SRS-KIMM Standard Method of Speed Trial Analysis." An analysis of model and full-scale test data was carried out for a 60.000 DWT Bulk Carrier and the correlation between model and full-scale ship was stuied.

• Tribology and Lubricants
• /
• v.23 no.1
• /
• pp.9-13
• /
• 2007

Despite numerous researches on atomic-scale friction have been carried out for understanding the origin of friction, lots of questions about sliding friction still remain. It is known that friction at atomic-scale always shows unique phenomena called 'stick-slips' which reflect atomic lattice of a scanned surface. In this work, experimental study on the effects of system stiffnesses and load on the atomic-scale stick-slip friction of graphite was performed by using an Atomic Force Microscope and various cantilevers/tips. The objective of this research is to figure out the dependency of atomic-scale friction on the nanomechanical properties in sliding contact such as load, stiffness and contact materials systematically. From this work, the experimental observation of transitions in atomic-scale friction from smooth sliding to multiple stick-slips in air was first made, according to the lateral cantilever stiffness and applied normal load. The superlubricity of graphite could be verified from friction vs. load experiments. Based on the results, the relationship between the stickslip behaviors and contact stiffness was carefully discussed in this work. The results or this work indicate that the atomic-scale stick-slip behaviors can be controlled by adjusting the system stiffnesses and contact materials.

• Proceedings of the KSME Conference
• /
• 2007.05b
• /
• pp.3128-3133
• /
• 2007

The mixing method of water and chemicals is significant in a small-scale water supply system because drinking water should be supplied with a certain quantity of remaining chemicals maintained. In the present study, the concentration distribution and the mixing index were obtained from four models, which were to find out the optimal mixing method of water and chemicals. The two models brought the good mixing effects out of the four, one for providing chemicals from the center of water supply pipe and the other for setting up the semicircle block at the downstream of the chemicals-providing pipe. As a result, the mixing effect was found out to be increased due to the diffusion and the disturbance of flows. In conclusion, these results are expected to contribute to designing the optimal mixing system.