• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2009년도 추계학술대회 논문집
• /
• pp.169-172
• /
• 2009

Multiple scale modeling has been applied to predict defect shape change during the wire rod rolling process. The size difference between bloom and defect prevent using usual FEM approaches due to the enormous number of elements required to depict the defect. The newly developed multiple scale model can visualize defect shape changes during the multi stands rolling process. The defect positioned at the top and side of bloom are smoothed out but the one at the middle evolved as folding or remained as crack. This approach can be used for defect control with roll shape design and initial bloom shape.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1999년도 제3회 압연심포지엄 논문집 압연기술의 미래개척 (Exploitation of Future Rolling Technologies)
• /
• pp.412-422
• /
• 1999

Scale defects generated on the strip surface in a tandem finishing mill line are collected from the strip trapped among the production mills by freezing the growing scale on the strip by the melt glass coating and shutting down the line simultaneously. The samples observed of its cross sectional figure showed the process of scale defect formation where the defects are formed at the base metal surface by thicker oxidized scale during each rolling passes. The properties of the oxidized layer growth both at rolling and inter-rolling are detected down sized rolling test simulating carefully the rolling condition of the production line. The thickness of the oxidized layer at each rolling pass are simulated numerically. The critical scale thickness to avoid the defect formation is determined through the expression of mutual relation between oxidized layer thickness and the lanks of the strip called quality for the scale defects. The scale growth of scale less than the critical thickness and also to keep the bulk temperature tuning the water flow rate and cooling time appropriately. Two units of Inerstand Cooler are designed and settled among the first three stands in the production line. Two units of scale defect is counted from the recoiled strip and the results showed distinct decrease of the defects comparing to the conventionaly rolled products.

• 한국세라믹학회지
• /
• 제54권2호
• /
• pp.75-85
• /
• 2017

Thermoelectric is a key technology for energy harvesting and solid-state cooling by direct thermal-to-electric energy conversion (or vice versa); however, the relatively low efficiency has limited thermoelectric systems to niche applications such as space power generation and small-scale or high-density cooling. To expand into larger scale power generation and cooling applications such as ATEG (automotive thermoelectric generators) and HVAC (heating, ventilation, and air conditioning), high-performance bulk thermoelectric materials and their low-cost processing are essential prerequisites. Recently, the performance of commercial thermoelectric materials including $Bi_2Te_3$-, PbTe-, skutterudite-, and half-Heusler-based compounds has been significantly improved through non-equilibrium processing technologies for defect engineering. This review summarizes material design approaches for the formation of multi-dimensional and multi-scale defect structures that can be used to manipulate both the electronic and thermal transport properties, and our recent progress in the synthesis of conventional thermoelectric materials with defect structures is described.

• Structural Engineering and Mechanics
• /
• 제60권4호
• /
• pp.667-691
• /
• 2016

This study focuses on the damage detection of defect types in plate structures based on wavelet transform (WT) and curvelet transform (CT). In particular, for damage detection of structures these transforms have been developed since the last few years. In recent years, the CT approach has been also introduced in an attempt to overcome inherent limitations of traditional multi-scale representations such as wavelets. In this study, the performance of CT is compared with WT in order to demonstrate the capability of WT and CT in detection of defect types in plate structures. To achieve this purpose, the damage detection of defect types through defect shape in rectangular plate is investigated. By using the first mode shape of plate structure and the distribution of the coefficients of the transforms, the damage existence, the defect location and the approximate shape of defect are detected. Moreover, the accuracy and performance generality of the transforms are verified through using experimental modal data of a plate.

• 한국멀티미디어학회논문지
• /
• 제15권4호
• /
• pp.439-448
• /
• 2012

TFT-LCD 패널을 저해상도로 획득한 영상은 불균일한 휘도 분포와 노이즈 신호, 그리고 결함 신호로 구성되어 있다. 불균일한 휘도 분포와 노이즈로 인해 결함 신호를 분할하기 어려우며 이를 위해 다양한 분할 방법이 개발되고 있다. 본 논문에서는 공간영역 상에서 Eikvil et al.'s에 의해 제안되어진 크기가 다른 두 개의 창을 두고 각 창의 평균을 계산하고 그 값의 차이를 이용하는 방법을 이용하여 TFT-LCD 패널 이미지 상에 존재하는 결함의 영역을 분할하는 방법을 제안한다. 하지만 이 방법은 창의 크기에 의해 검출 가능한 결함영역의 크기가 제한되어 큰 결함영역을 분할하기 위해서는 창을 키워야 하므로 효율적이지 못한 문제점을 가지고 있다. 이 문제를 해결하기위해 멀티스케일(Multi-scale)을 이용하고, 각 스케일에서 검출 가능한 결함 크기를 제한함으로써 다양한 크기의 결함 영역을 분할 할 수 있는 알고리즘을 제안한다. 알고리즘의 성능을 검증하기위해 다양한 크기의 결함 영역을 만들어 분할되어진 결과와 실제 결함이 존재하는 TFT-LCD 패널 이미지의 분할 결과들을 통해 실제 적용 가능한 알고리즘임을 보인다.

• 한국해양공학회지
• /
• 제28권4호
• /
• pp.268-273
• /
• 2014

To investigate the turbulence characteristics within the boundary layer over a flat plate, an experimental study was performed using a PIV technique in a circular water channel. For two water velocities, 0.92 and 1.99 m/s, the water velocity profiles were taken and analyzed to determine turbulent characteristics such as the Reynolds stress, Taylor micro-length scale, and Kolmogorov length scale within the defect law region of the boundary layer. These analysis methods may be applied to research on the friction drag reduction technology using micro-bubbles or an air sheet over the surface of a ship's hull, because the physical reason for the friction drag reduction could be found by understanding the variation of the turbulence characteristics and structures in the boundary layer.

• Journal of Acupuncture Research
• /
• 제18권2호
• /
• pp.1-17
• /
• 2001

Background and Objetive : Lack of uniformity in reporting facial nerve recovery in patients with facial nerve paralysis has been a major disadvantage in comparing treatment modalities. The objective evaluation of facial nerve function is a complex procedure. The House and Brackmann grading system, the Yanagihara grading system has been recommend as a universal standard for assessing the degree of facial nerve palsy. However, clinical studies for treatment of facial palsy have rarely used this universal standard in oriental medicine. That is the reason for analysing this facial nerve grading system. Material and Method : We choose 10 scales reported from 1955 till 1995. These facial nerve grading systems may be classified as Gross system, Regional system and Specific system. Result and Conculsion : The scales of Botmann and Jonkees, May, Peitersen, and House and Brackmann are the gross facial nerve grading systems with which we grossly assess the facial motor dysfunction and the secondary defect. Among these scales, H-B scale is the most widespred The scales of Yanagihara(若杉文吉), Smith, Adour and Swanson, Jassen, FEMA are the regional facial nerve grading system in which we weight, or unweight the facial motor dysfunction and the secondary defect. For example, the scales of Yanagihara(若杉文吉) and Smith are the unweighted regional scale, the scale of Adour and Swanson, Jassen, FEMA are the weighted regional grading system. The scale of Stennert is the Specific facial nerve grading system in which we respectively assess the grade of facial dysfunction at rest, in motion and the secondary defect. For the objective evaluation of the oriental medicine treatment for facial palsy, we must use the universal standard scale, i.e. the H-B scale, the Yanagihara scale.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.329-329
• /
• 2016

Large-area graphene films produced by means of chemical vapor deposition (CVD) are polycrystalline and thus contain numerous grain boundaries that can greatly degrade their performance and produce inhomogeneous properties. A better grain boundary engineering in CVD graphene is essential to realize the full potential of graphene in large-scale applications. Here, we report a defect-selective atomic layer deposition (ALD) for stitching grain boundaries of CVD graphene with ZnO so as to increase the connectivity between grains. In the present ALD process, ZnO with hexagonal wurtzite structure was selectively grown mainly on the defect-rich grain boundaries to produce ZnO-stitched CVD graphene with well-connected grains. For the CVD graphene film after ZnO stitching, the inter-grain mobility is notably improved with only a little change in free carrier density. We also demonstrate how ZnO-stitched CVD graphene can be successfully integrated into wafer-scale arrays of top-gated field effect transistors on 4-inch Si and polymer substrates, revealing remarkable device-to-device uniformity.

• 한국자기공명학회논문지
• /
• 제5권1호
• /
• pp.13-18
• /
• 2001

Natural alpha radiation produced a stable defect center to certain minerals. Electron Paramagnetic Resonance(EPR) spectroscopy is a powerful tool f3r quantifying this defect center. EPR method has been applied to trace alpha-radiation effect around the uranium ore deposit. The results show that EPR technique can be used to measure rapidly and nondestructively the defect center produced by natural alpha radiation. In general, a good correlation was achieved between defect center concentration and actinide elements(U, Th). These results imply that the concentration of defect center is dependent on the alpha radiation dose over long time scale.

• Smart Structures and Systems
• /
• 제23권1호
• /
• pp.71-79
• /
• 2019

In general, it may be advantageous to measure the pressure pulsation near a valve to detect a valve defect in a linear compressor. However, the acceleration signals are more advantageous for rapid classification in a mass-production line. This paper deals with the performance improvement of fault classification using only the compressor-shell acceleration signal based on the relation between the refrigerant pressure pulsation and the shell acceleration of the compressor. A transfer function was estimated experimentally to take into account the signal noise ratio between the pressure pulsation of the refrigerant in the suction pipe and the shell acceleration. The shell acceleration signal of the compressor was modified using this transfer function to improve the defect classification performance. The defect classification of the modified signal was evaluated in the acceleration signal in the frequency domain using Fisher's discriminant ratio (FDR). The defect classification method was validated by experimental data. By using the method presented, the classification of valve defects can be performed rapidly and efficiently during mass production.