• Food Science and Preservation
• /
• v.24 no.6
• /
• pp.758-763
• /
• 2017

In this study the effect of rice addition on the quality of beer was investigated. Pilot-scale brews were performed with addition ratios of 10, 20, 30, and 40% of brown rice (Oryza sativa L. cv. Hangaru) which were compared with 100% malt beer and commercial beers in terms of quality. Alcohol content of beer was between 3.93 to 4.40%. The total sugar content increased when the rice percent was increased. The pH range of beer were 4.32 and 4.60, which were no significant differences found among by the rate of rice added. Total acidity and amino-acidity decreased corresponding to increasing percent of rice, on the other hand, lightness of beer was increased the increase in percent of rice, while redness and yellowness of beer were decreased. The study demonstrated that the increases of rice addition in beer provided some positive effects on beer quality by decreasing bitterness where as improving beer color.

• Korean Journal of Materials Research
• /
• v.12 no.9
• /
• pp.750-760
• /
• 2002

In this study, three solders, Sn-37Pb, Sn-3.5Ag, and Sn-3.8Ag-0.7Cu were screen printed on both electroless Ni/Au and OSP metal finished micro-via PCBs (Printed Circuit Boards). The interfacial reaction between PCB metal pad finish materials and solder materials, and its effects on the solder bump joint mechanical reliability were investigated. The lead free solders formed a large amount of intermetallic compounds (IMC) than Sn-37Pb on both electroless Ni/Au and OSP (Organic Solderabilty Preservatives) finished PCBs during solder reflows because of the higher Sn content and higher reflow temperature. For OSP finish, scallop-like $Cu_{6}$ /$Sn_{5}$ and planar $Cu_3$Sn intermetallic compounds (IMC) were formed, and fracture occurred 100% within the solder regardless of reflow numbers and solder materials. Bump shear strength of lead free solders showed higher value than that of Sn-37Pb solder, because lead free solders are usually harder than eutectic Sn-37Pb solder. For Ni/Au finish, polygonal shaped $Ni_3$$Sn_4$ IMC and P-rich Ni layer were formed, and a brittle fracture at the Ni-Sn IMC layer or the interface between Ni-Sn intermetallic and P-rich Ni layer was observed after several reflows. Therefore, bump shear strength values of the Ni/Au finish are relatively lower than those of OSP finish. Especially, spalled IMCs at Sn-3.5Ag interface was observed after several reflow times. And, for the Sn-3.8Ag-0.7Cu solder case, the ternary Sn-Ni-Cu IMCs were observed. As a result, it was found that OSP finished PCB was a better choice for solders on PCB in terms of flip chip mechanical reliability.

• Journal of the Korean Geotechnical Society
• /
• v.34 no.5
• /
• pp.19-35
• /
• 2018

The necessity of predicting the spatial information of the site-specific seismic response, which is essential information for the comprehensive earthquake disaster countermeasures, is increasing for the mid-west urban areas where the earthquake-induced damages can be increased due to frequent occurrence of mid-scale earthquake such as 2016 Gyeongju Earthquake and 2017 Pohang Earthquake. Especially, researches on strategic securing of site survey datasets and understanding the site-specific site response characteristics were conducted for Gyeonggi-do, South Korea. In this study, a GIS-based framework for site-specific assessment of site response and induced vulnerable area in Gyeonggi-do, South Korea was proposed. Geo-Data based on GIS platform was constructed for regional estimation of geotechnical characteristics by collecting borehole and land coverage datasets. And the geo-spatial grid information was developed for deriving spatial distribution of geotechnical layer and site response parameters based on the optimization of the geostatistical interpolation method. Accordingly, base information for Improving earthquake preparedness measures was derived as seismic zonation map with administrative sub-units considering the quantitative site effect of Gyeonggi-do.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.21 no.6
• /
• pp.749-754
• /
• 2011

In this study, we propose the design of optimized pRBFNNs-based face recognition system using two-dimensional Image and ASM algorithm. usually the existing 2 dimensional face recognition methods have the effects of the scale change of the image, position variation or the backgrounds of an image. In this paper, the face region information obtained from the detected face region is used for the compensation of these defects. In this paper, we use a CCD camera to obtain a picture frame directly. By using histogram equalization method, we can partially enhance the distorted image influenced by natural as well as artificial illumination. AdaBoost algorithm is used for the detection of face image between face and non-face image area. We can butt up personal profile by extracting the both face contour and shape using ASM(Active Shape Model) and then reduce dimension of image data using PCA. The proposed pRBFNNs consists of three functional modules such as the condition part, the conclusion part, and the inference part. In the condition part of fuzzy rules, input space is partitioned with Fuzzy C-Means clustering. In the conclusion part of rules, the connection weight of RBFNNs is represented as three kinds of polynomials such as constant, linear, and quadratic. The essential design parameters (including learning rate, momentum coefficient and fuzzification coefficient) of the networks are optimized by means of Differential Evolution. The proposed pRBFNNs are applied to real-time face image database and then demonstrated from viewpoint of the output performance and recognition rate.

• Journal of the Korean GEO-environmental Society
• /
• v.8 no.1
• /
• pp.33-40
• /
• 2007

Engineering behaviour of uplift-resisting ground anchors constructed in weathered rocks has been investigated by carrying out a series of full scale pull-out tests. The anchor was to resist uplift forces (buoyancy) associated with high groundwater table acting on the basement of a rail way station. The study has included the ultimate pull-out capacity of the anchors and shear stress transfer mechanism at the anchor-ground interface. The pull-out tests were conducted by changing bonded lengths of the anchor (2~7 m) and diameter of drilled borehole (108~165 mm) to investigate their effects on the behaviour of the anchor. The measured results showed that the ultimate capacity of the anchors was increased with an increase in the bonded length, diameter of drilled borehole as expected. The ultimate capacity of the anchors deduced from the pull-out tests ranged from 392 to 1,569 kN, depending on the above-mentioned factors. This corresponds to the interface shear strength of about 227~505 kPa. Interface shear stresses deduced from the pull-out test showed that the larger the pull-out force, the larger the mobilisation of the interface shear strength. The failure mode of the anchors heavily depended on the bonded lengths of the anchors. When the bonded length was short (2~3 m), a cone-type failure was observed, whereas when the bonded length increased (5~7 m), failure developed at the grout-ground interface.

• KDI Journal of Economic Policy
• /
• v.34 no.3
• /
• pp.133-186
• /
• 2012

This paper analyzes the effectiveness of social networks in finding jobs and estimates the value of job search network using the Korean Laber and Income Panel Study (KLIPS) dataset and utilizing the Difference-in-Difference Propensity Score Matching (PSM) methodology (Heckman et al., 1997). While the wide use of social networks in the Korean labor market is often perceived as 'nepotism,' this study confirms that social networks, by serving as an effective information transmitter between job search and recruitment, make a significant contribution to improving the adequacy of job matching in the domestic labor market. In order to verify the effectiveness of using social networks for getting jobs, this study looks into the cases of labor turnover using social networks and also not using it. In the aspect of individual satisfaction improvement relating to workplace and job duties, both cases of turnover turn out to experience an increased satisfaction by 2~3 points (on a 100-score scale). Meanwhile, as for the educational and technical adequacy improvement, no positive effects are found in the case of turnover without social networks, whereas the educational and technical adequacy improvement turns out to increase by 2.13 and 2.52 points, respectively, in the case of turnover using social networks. The effect of income increase through turnover using social networks registered 40,074 Korean won per month (as of 2010), which can be considered as the result from the improved educational and technical adequacy. Of all things being considered, the value of job search network per wage worker in the Korean society is estimated to be 18.72 million won in terms of life-cycle wage improvement, and 758.2 scores in terms of the improvement of working life satisfaction. Provided that the cash value of satisfaction score 1 is equivalent to 'n' times 10,000 won, the aggregate value of job search network is estimated to be 18.72+7.582n million won, which means the total amount of costs that a wage worker in the Korean society willingly pays to maintain and manage job networks for lifetime.

• Tuberculosis and Respiratory Diseases
• /
• v.61 no.6
• /
• pp.533-546
• /
• 2006

Background: The aim of this study was to determine the effectiveness of self-efficacy promoting pulmonary rehabilitation in patients with chronic obstructive pulmonary disease (COPD). Methods: thirty six patients, with clinically stable COPD were randomly assigned: 18 to a rehabilitation group and another 18 as a control group, The subjects participated in a the self-efficacy promoting pulmonary rehabilitation program for 8 weeks. This program consisted of education, breathing retraining, exercise training, relaxation and counseling. The control group received education only. The outcome variables were self-efficacy, dyspnea, exercise endurance, pulmonary function, and quality of life. Dyspnea was measured using the modified Borg scale. Exercise endurance was measured by the six minute walking distance. The quality of life was measured by the quality of life index for pulmonary disease patients. Results: In the rehabilitation group after performing the self-efficacy promoting pulmonary rehabilitation program, the self-efficacy score, exercise endurance, and quality of life score were higher than the control group (p=0.007, p=0.038, and p=0.039, respectively). and the exertional dyspnea score was significantly lower than controls(p=0.045). However, the dyspnea score and FEV1 were similar after performing the self-efficacy promoting pulmonary rehabilitation program. Conclusion: The self-efficacy promoting pulmonary rehabilitation program is effective to in improve self-efficacy, exertional dyspnea, exercise endurance and quality of life in patients with COPD.

• Journal of Navigation and Port Research
• /
• v.29 no.5 s.101
• /
• pp.475-480
• /
• 2005

Lab scale experimental study was carried out for SBR process, to investigate the effects of influent ship sewage organic compound removal and Bacillus sp. state on design parameters. This process was able to remove nitrogen and phosphorus as well as organic matter efficiently. More than $92.0\%$ of chemical oxygen demand(COD) were removed. In addition, about $84.0\%$ of total nitrogen (T-N) was reduced. The total phosphorus(T-P) reduction averaged $93\%$. The performance load of SBR process was shown to be $0.095kg{\cdot}TOC/m3{\cdot}day$. The pH was decreased from 8.1 to 7.0 within 30 min and increased to 7.3 at the end of anoxic stage, and these phenomena were explained. The sludge produced in the SBR process is characterized by low generation rate (about $0.36kg{\cdot}MLSS/kg{\cdot}TOC$) and excellent settleability. The number of Bacillus sp. in the SBR was $24.2\%$, indicating that Bacillus sp. was a predominant species in the reactor.

• Resources Recycling
• /
• v.21 no.6
• /
• pp.12-22
• /
• 2012

This study investigated a utilization technology of light burned dolomite. light burned dolomite ($CaMg(CO_3)_2$) generated in furnace (steel manufacturer) is an alternative to quick lime. Using light burned dolomite has an effect on reducing the consumption of fluorite slag MgO concentration in supersaturated solution by prolonging the life of softening effect. Armophous MgO, not containing periclase is formed by firing dolomite under $800^{\circ}C$. It has larger surface area and higher reactivity than periclase, and also shows better expansion effect than quicklime. Due to those effects, therefore, armophous MgO produced from light burned dolomite is used as an alternative expansion agent in mortar. In the experiment, characteristics of light burned dolomite were compared to those of existing expansion agents such as anhydrite and quicklime. Then, each expansion and shrinkage rates were measured over a period of about 3 months in both of 1m Jis mold at labscale and apartment mortar flooring at field scale. In the result, it was observed that light burned dolomite in mortar flooring more compensates for the expansion and shrinkage rates than the existing expansion agents, showing low expansion rate of below 0.05% and also decreases the crack.

• Korean Journal of Psychosomatic Medicine
• /
• v.6 no.1
• /
• pp.35-45
• /
• 1998

Objectives : The purpose of this study was to determine correlation between coping strategies to disease and quality of life in chrome viral B hepatitis patients ; to investigate difference of coping strategies to disease and quality in life between chronic viral B hepatitis patients and normal persons ; and to identify major variables related to quality in life of chronic viral B hepatitis patients. Methods: The authors used Weisman coping strategy scale for measuring coping ability and efficacies, and the questionnaire for measuring quality of life including physical, psychological, social and economical aspects and satisfaction of sexual life was made by authors based on related literatures. Data were collected through questionnaire survey over a period from Sep 15, 1994 to Nov 11, 1994. Subjects served for this study consisted of 94 chronic viral B hepatitis patients visited to department of internal medicine at one general hospital and 100 normal persons visited to one general hospital for routine check up of health. The collected data were analyzed by SAS and the statistical methods for analysis were Chisquare, t-test and multiple regression analysis. Results : 1) It was revealed that coping strategies to disease significantly correlated to individual's quality of life. 2) There was no significant difference in coping strategies to disease between chronic viral B hepatitis patients and normal persons. However, chronic viral B hepatitis patients showed the lower scroes of quality of life in physical, psychological and economical aspects. 3) The most important variables which were influenced upon quality of life were coping strategies to disease and satisfaction of sexual life. That is, the more active coping strategies to diseases and the higher satisfaction of sexual life, consequently the higher quality of life was. Especially male patient group or normal persons showed each other the higher scores of quality of life in physical and psychological area than female group or patient group. 4) No statistically significant difference in coping strategies to disease and quality of life was found between HBeAg positive group and HBeAg negative group. Conclusions : The authors suggest that chronic viral B hepatitis patients may show the lower score of quality of life than normal person. Therefore, quality of life assessment should become an integral part of all clinical area that seek to assess the effectiveness of treatment. Also, through the interdisciplinary approach, a comprehensive paradigm that can better account for the effects of chronic disease on the individual' s quality of life should be developed.