• Journal of Advanced Marine Engineering and Technology
• /
• v.23 no.2
• /
• pp.131-139
• /
• 1999

An experimental study was conducted to investigate the fouling effects of geothermal water scale deposited onto a heating surface upon its forced convection heat transfer characteristics. Scales deposited onto the heating surfaces of heat exchangers seriously reduce the heat transfer perfor-mance and also increase the hydrodynamic drag. Accordingly fouling is an important problem in the design and operation of heat exchangers. The cylinders were settled in tandem with equal dis-tance between neighbouring cylinders and only the test cylinder was heated under the condition of constant heat flux. The Reynolds number was varied from 13000310 through 50003100. It is found that the heat transfer of the in-line tube banks greatly varies with the fouling of geothermal water scale especially its scale height. Further the local and average Nusselt numbers strongly depend upon the cylinder spacing and the Reynolds number.

• Journal of Environmental Science International
• /
• v.1 no.1
• /
• pp.45-50
• /
• 1992

Understanding the nonlinear flow caused by orographic effects can be valuable in siting of new businesses, industries, and transportation facilities. In spite of recent work on large-amplitude waves and wave breaking, the studies of flow around large scale mountains have just begun. The generative mechanism of lee vortices in the lee of large scale mountain Is investigated by Ertel's theorem. The CSU RAMS is used as a numerical model. According to the numerical results, the isentropes are depressed behind the large scale mountains. This means the vortex lines must run upward and downward along the depression surface because vortex lines adhere to isentropic surfaces. Therefore, the vertically oriented vorticity can be formed in the lee of the large scale mountain. This vorticity plays an important role for orographic Precipitation, because strong vertical velocity and cloud bandy are developed along isothermal deformation surface.

• 한국연소학회:학술대회논문집
• /
• 2006.10a
• /
• pp.46-49
• /
• 2006

Extinction limits and combustion temperatures in heat-recirculating excess enthalpy reactors employing both gas-phase and catalytic reaction have been examined previously, with and emphasis Reynolds number (Re) effects and possible application to microscale combustion devices. However, Re is not the only parameter needed to characterize reactor operation. In particular, the use of a fixed reactor size implies that residence time and Re cannot be adjusted independently. To remedy this situation, in this work geometrically similar reactors of different physical sizes were tested with the aim of independently determining the effects of Re and Da. It is found that the difference between catalytic and non-catalytic combustion limits narrow as scale decreases. Moreover, to assess the importance of wall thermal conductivity, reactors of varying wall thickness were studied. From these results the effect of scale on microscale reactor performance and implications for practical microcombustion devices are discussed.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 1994.10a
• /
• pp.47-54
• /
• 1994

Full-scale and 1:15 scale fluid model experiments of roof ballast pavers are employed to optimize paver geometry and study wind loading and performance of roof ballast pavers. Wind pressures above and beneath pavers are conducted for buildings of different heights and in different flow conditions. The effects of the side hole size and the underneath rib height under the wind loading on pavers and the effects of roof parapet height as well as flow conditions on the performance of pavers are studied. Incorporation of wind tunnel experimental results into code statements is also provided.

• Structural Engineering and Mechanics
• /
• v.67 no.5
• /
• pp.517-525
• /
• 2018

In this study, we investigate the vibration of single-walled carbon nanotubes embedded in a polymeric matrix using nonlocal elasticity theories with account arbitrary boundary conditions effects. A Winkler type elastic foundation is employed to model the interaction of nanobeam and the surrounding elastic medium. Influence of all parameters such as nonlocal small-scale effects, Winkler modulus parameter, vibration mode and aspect ratio of nanobeam on the vibration frequency are analyzed and discussed. The mechanical properties of carbon nanotubes and polymer matrix are treated and an analytical solution is derived using the governing equations of the nonlocal Euler-Bernoulli beam models. Solutions have been compared with those obtained in the literature and The results obtained show that the non-dimensional natural frequency is significantly affected by the small-scale coefficient, the vibrational mode number and the elastic medium.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2002.05a
• /
• pp.101-104
• /
• 2002

Almost all buildings/infrastructures made of composite materials are fabricated without proper design. Unlike airplane or automobile parts, prototype test is impossible. One cannot destroy 10 story buildings or 100-meter long bridges. People try to build 100-story buildings or several thousand meter long bridges. In order to realize "composites in construction", the following subjects must be studied in detail, for his design. Concept optimization, Simple method of analysis, Folded plate theory, Size effects in failure, and Critical frequency. Unlike the design procedure with conventional materials, his design should include material design, selection of manufacturing methods, and quality control methods, in addition to the fabrication method. In this paper size/scale effects in failure criteria is briefly explained for practicing engineers.engineers.

• Journal of Korean Academy of Nursing Administration
• /
• v.18 no.4
• /
• pp.452-459
• /
• 2012

Purpose: This study was a descriptive study conducted to investigate the effects of intellectual capital on organizational performance of nurses in medium and small hospitals. Methods: Data were collected from 241 nurses working in medium and/or small hospitals located in G City from August 10 to September 17, 2011. The measurement tools were the Intellectual Capital scale and Organizational Performance scale. Data were analyzed using frequency, percentage, mean, standard deviation, t-test, one way ANOVA, Pearson correlation, and hierarchical regression with SPSS WIN 18.0 PC. Results: Intellectual capital composed of human, customer, and structure capital had significant effects on organizational performance of nurses working in medium and small hospitals and explained 50.4% of the variance. Conclusion: In order to promote organizational performance of nurses, nursing managers and administrators need to invest more resources into the intellectual capital of the system including human, customer, and structure capital.

• Advances in nano research
• /
• v.9 no.2
• /
• pp.69-82
• /
• 2020

In this paper, a new explicit analytical formula is derived for the critical buckling load of Double Walled Carbon Nanotubes (DWCNTs) embedded in Winkler elastic medium without taking into account the effects of the nonlocal parameter, which indicates the effects of the surrounding elastic matrix combined with the intertube Van der Waals (VdW) forces. Furthermore, we present a model which predicts that the critical axial buckling load embedded in Winkler, Pasternak or Kerr elastic medium under axial compression using the nonlocal Donnell shell theory, this model takes into account the effects of internal small length scale and the VdW interactions between the inner and outer nanotubes. The present model predicts that the critical axial buckling load of embedded DWCNTs is greater than that without medium under identical conditions and parameters. We can conclude that the embedded DWCNTs are less susceptible to axial buckling than those without medium.

• Journal of the Korean housing association
• /
• v.3 no.2
• /
• pp.13-19
• /
• 1992

The purpose of this study is to grasp spatial effects of colours in interior design. The visual feeling in the 1/10 living room scale models that are different in the colour combination of ceilings, walls and floors is judged using a semantic scale of the fifteen adjectives. The major findings are as follows; 1) As a result of factor analysis, three dimensions, "evaluation", "activity" and "warmness" are extracted. Dimension 1, "evaluation", is most greatly affected by the chroma and hue of the room colour, dimension 2, "activity", by the hue and value, by the difference in hue and value of ceilings, walls and floors, dimensions 3, "warmness", by mainly the hue of the rooms. 2) Concerning the spatial effects of colour, the subjects felt higher vlaue with relevance to the hue of GY, Y, low chroma and high value. The room colours other than walls is felt more comfortable in similar colour, especially hue and value.re comfortable in similar colour, especially hue and value.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2003.10a
• /
• pp.187-189
• /
• 2003

Almost all building/infrastructures made of composite materials are fabricated without proper design. Unlike airplane or automobile parts, prototype test is impossible. One cannot destroy 10 story buildings or 100-meter long bridges. People try to build 100-story buildings or several thousand meter long bridges. In order to realize "composites in construction", the following subjects must be studied in detail, for his design: Concept optimization, Simple method of analysis, Folded plate theory, Size effects in failure, and Critical frequency. Unlike the design procedure with conventional materials, his design should include material design, selection of manufacturing methods, and quality control methods, in addition to the fabrication method.on method.