• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.10a
• /
• pp.252-255
• /
• 2010

In this thesis, it suggests large scale interactive display system which is able to various touch interaction and bases on infrared LED BAR and using 3D. Interaction layer formed on space from screen which is able to feel 3D using suggested IR LED BAR. It gets the image in real time what is composed in interaction section using infrared camera with band pass filter. The image finds touch interaction coordinate through image processing module and saves as packet. It send packet to server through network data communication. It analyze packet by metaphor analysis module and save as metaphor event and send it to contents. On contents, it practices to metaphor event result in real time so it makes use touch interaction in stereopsis. According to this process, it does not need touch the screen at firsthand but it is possible system and touch interaction so touch interaction is possible while use 3D.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2003.04a
• /
• pp.229-233
• /
• 2003

Theodolite measurement system is non-contacted 3-dimensional measurement system. The system accuracy is 0.5 mm or better for distance 0 ~ 100m. And the system is used for a product of middle and large scale. This study is performed for the measurement uncertainty of the system. We could know that the main uncertainty factors are temperature, illumination and skill. And, we perform the study for the effect according to the height difference of scale bar. And, we calculated the measurement uncertainty with those factors.

• Journal of Welding and Joining
• /
• v.27 no.3
• /
• pp.52-59
• /
• 2009

Flash butt welding is applied in many industries. New technology was developed recently for joining billets which called "EBROS (Endless Bar Rolling System)". After reheating billets in furnace, two billets were joined using flash butt welding. The objective of this study was to investigate the effect of alloying elements on mechanical properties of flash butt welded zone of hot rolled steel bar. The tensile properties on welded zone of Fe-Mn steel and Fe-Mn-V steel were dropped as compared with non-welded zone. Fe-Mn-Nb steel was opposed to the former. It was found that the white band at the welded zone had high ferrite volume fraction and large ferrite grain size. The vertical white band between flash butt welded billets was transformed into an arrowhead it of steel bar. According to this band, softening has been appeared. There was a interesting phenomenon with HAZ of Fe-Mn-Nb Steel, 40nm scale of particles were observed and hardness of HAZ was higher than non-welded zone.

• Proceedings of the KSME Conference
• /
• 2003.11a
• /
• pp.169-174
• /
• 2003

The thermal design of the bus bar of a Gas-Insulated Switchgear(GIS) becomes important since the current-carrying capacity of the GIS is limited by maximum operating temperature. In order to predict temperature rise of the bus bar, a program has been developed. Various heat sources possibly generated in the bus bar are calculated in the program. To estimate temperature rises at the bus bar caused by the heat balance between the heat generation and heat transfer, the finite volume method as well as the $4^{th}$ order Runge-Kutta method has been employed. In the experiments, temperature rises at conductor, contact part and external tank are measured for full-scale gas-insulated bus bars. The comparisons of the predicted values of the heat balance calculation to those of the experiments are made. From the comparisons, it is concluded that the developed program can predict the temperature rise of the bus bar quite well.

• Structural Engineering and Mechanics
• /
• v.83 no.6
• /
• pp.799-810
• /
• 2022

This study investigated the effect of the strengthening efficiency of unbonded steel-bar truss system on the out-of-plane behavior of perforated masonry walls. Four full-scale unreinforced masonry (URM) walls with two different planes were prepared using the unbonded steel-bar truss system and a URM walls without strengthening. All masonry walls were tested under constant axial and cyclic lateral loads. The obtained test results indicated that the pinching effect in the out-plane behavior of masonry walls tends to decrease in the in- and out-of-plane strengthened URM walls using the unbonded steel-bar truss system with the higher prestressing force ratio (R_p) of vertical reinforcing bars in the unbonded steel-bar truss system, regardless of the perforated type of the masonry wall. Consequently, the highest maximum shear resistance and cumulative dissipated energy at peak load in the post-peak behavior were observed in the in- and out-plane strengthened URM walls with the highest R_p values, which are 2.7 and 6.0 times higher than those of URM. In particular, the strengthening efficiency of the unbonded steel-bar truss system was primarily attributed to the vertical prestressed steel-bars rather than the diagonal steel-bars, which indicates that the strains in the vertical prestressed steel-bars at the peak load were approximately 1.6 times higher than those in the diagonal steel-bars.

• Fire Science and Engineering
• /
• v.25 no.3
• /
• pp.51-56
• /
• 2011

The full-scale experiments are carried out to investigate the fire suppression characteristics of water-based fire fighting systems in a road tunnel. Applied systems are the low-pressure water spray system at 3.5 bar and the high-pressure water mist system at 60 bar. The water flow rate of the high-pressure system is one sixth only of the water spray system. A passenger car and a heptane fuel pan with area of $1.4m^2$ are used as fire sources. A blower system is installed at the tunnel exit to realize the longitudinal ventilation conditions (0.9~3.8 m/s) in the tunnel. Temperatures from the fire source to the down-stream direction are measured by K-type thermocouple trees. The experimental results show that the cooling effect of the high pressure water mist system in the test conditions were equivalent to that of the low pressure water spray system for B-class fire.

• Journal of Haehwa Medicine
• /
• v.18 no.1
• /
• pp.101-107
• /
• 2009

Objectives: The purpose of this study is to show a case of patient with dysfunction of autonomic nervous system improved by oriental medical treatment. Methods: This patient was 66 year-old woman who complained pantalgia including abdominal pain and headache, cold sweating, anxiety, palpitation and fatigue. She was treated by herbal medicine(加味溫膽湯 $ji\bar{a}w\grave{e}iw\bar{e}nd\breve{a}nt\bar{a}ng$), acupuncture, moxa and aroma therapy. We used VAS(Visual analogue scale) to measure the progress of symptoms. Results : The symptoms of dysfunction of autonomic nervous system was improved after oriental medical therapy. Conclusions : This study suggests that oriental medicine therapy is effective in the trearment of dysfunction of autonomic nervous system.

• The Journal of Korean Medicine Ophthalmology and Otolaryngology and Dermatology
• /
• v.27 no.1
• /
• pp.130-139
• /
• 2014

Objectives : This is a clinical report on a 27-year-old patient with Multi-patched Alopecia Areata(AA) assumed to be occurred by chronic lymphadenopathy, and treated by oriental medicine treatment. Methods : The patient was treated by herb medication and acupuncture. The improvement of the patient was judged by magnifying glass, camera and VAS scale. Results & Conclusions : The AA patches were shown the regrowth of hair. And the pain from lymphadenopathy was disappeared. Oriental medicine treatment including Gagamsunbangpaedok-tang $(Ji\bar{a}ji\check{a}nxi\bar{a}nf\acute{a}ngb\grave{a}id\acute{u}-t\bar{a}ng)$ was effective to regrow hair on AA patches and reduce the symptom of lymphadenopathy as well.

• Textile Coloration and Finishing
• /
• v.31 no.1
• /
• pp.14-24
• /
• 2019

In this study, dyeability of PET fabric was investigated depending on dyeing temperature, pressure, and leveling time using laboratory scale supercritical $CO_2(scCO_2)$ dyeing machine. Dyeing temperature, pressure, leveling time were varied from 100, 120, $130^{\circ}C$, 150, 200, 250bar, 40, 60, 80, 100min, respectively. It is proved that the higher temperature of $scCO_2$ dyeing process, the higher K/S value and the lower $L^*$ value, which in turn means the lower amount of dyeing molecules remained after process done. Compared 200bar with 250bar of dyeing pressure, $scCO_2$ dyeing fabrics under 250bar appeared to have a lower $L^*$ value, a higher K/S value than those from 200bar, meaning that dyeing color turns to darker with higher dyeing pressure. The experiments showed that the most ideal condition for $scCO_2$ dyeing process is $120^{\circ}C$, 250bar for 60 - 100min of leveling time.

• Journal of KSNVE
• /
• v.7 no.1
• /
• pp.55-60
• /
• 1997

In order to examine the validity of an asymptotic solution obtained from the method of multiple scales, we investigate a third-order subharmonic resonance response of a bar constrained by a nonlinear spring to a harmonic excitation. The motion of the bar is governed by a linear partial differential equation with a nonlinear boundary condition. The nonlinear boundary value problem is solved by using the finite difference method. The numerical solution is compared with the asymptotic solution.