• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2008년도 제30회 춘계학술대회논문집
• /
• pp.149-152
• /
• 2008

30톤급 액체로켓엔진 실물형 연소기의 형상에 따른 연소특성속도에 대한 연구를 수행하였다. 본 연구에서 연소기의 형상은 연소기 헤드와 분리가 가능한 내열재 및 채널 냉각형 연소실(${\varepsilon}$=3.2), 그리고 일체형인 팽창비가 각각 3.5와 12인 재생냉각형 연소기이다. 연소압력은 약 53${\sim}$60 bar 그리고 추진제 유량은 약 89 kg/s이고, 적용된 분사기는 리세스수가 1.0인 동축 와류형이다. 설계점 연소시험에서 팽창비가 12인 일체형 재생냉각 방식의 연소기가 가장 큰 연소특성속도를 보였는데 이는 추진제인 케로신이 분무되기 전 챔버 냉각으로 인한 온도 상승에 따른 엔탈피의 증가 및 연소압력의 증가에 기인한 것이다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2007년도 제29회 추계학술대회논문집
• /
• pp.114-118
• /
• 2007

본 연구는 30ton급 액체로켓엔진 지상연소시험용 연소기의 설계 및 제작에 관한 것이다. 본 연소기는 연소압력이 60 bar, 노즐 확대비가 12이며, 헤드부와 연소실부가 용접되는 일체형 재생냉각형 연소기이다. 헤드부는 저온에서 기계적 특성이 좋은 STS316L을 사용하였다. 연소실부는 실린더부, 노즐목부, 1차 노즐부, 2차 노즐부로 구성되어 있다. 연소실부의 내피 재질은 동합금 /STS319J1/STS316L, 외피 재질은 STS329J1을 사용하였다. 선반, 밀링, MCT, 롤링 및 프레싱 등의 기계적 가공을 통하여 단품들을 완성하였다. 이러한 각 단품들을 조립하여 일반 용접 및 전자빔 용접, 브레이징 등을 적용하여 일체형으로 접합하였다.

• 청정기술
• /
• 제25권3호
• /
• pp.245-255
• /
• 2019

가압순산소 연소는 발전 공정의 온실가스 포집 기술의 하나로서, $CO_2$의 압축 전 단계에 FGC (Flue gas condensor)를 통해 배가스 내 수분의 잠열을 회수하여 효율을 높일 수 있다. 또한 FGC는 가스의 용해도를 이용하여 $SO_x$ 및 $NO_x$를 동시에 효과적으로 제거할 수 있는 장점이 있다. 이 연구에서는 FGC의 방식 중 하나로서 직접 접촉식 응축기를 고안하여 $SO_x$ 및 $NO_x$의 저감율을 평가하였다. 특히 가스가 물에 직접 통과할 때 용해를 통한 저감효율을 측정하기 위해 단독가스와 혼합가스로 분리하여 상압에서 10 bar까지의 압력조건을 변수로 실험을 진행하였다. 단독 가스 실험결과 $NO_x$는 상압에서 저감율이 약 20%, 10 bar 압력조건에서 약 76%로 크게 증가하였다. 또한 $SO_2$는 높은 용해도로 전량이 용해하여 초기 저감율에 큰 차이가 나타나지 않았으나, 압력이 증가할수록 최고 저감율이 유지되는 시간이 증가하였다. 동시저감 실험 결과 상압에서 $NO_x$의 저감율은 13%이나, 압력이 상승할수록 헨리법칙에 의한 용해도 증가에 따라 20 bar에서 56%로 증가하였다. $SO_2$는 초기에 다량 용해된 후 다시 배출 농도가 증가하는 폭이 상압에서는 1,219 ppm, 20 bar에서는 165 ppm으로 감소하였다. 결론적으로 $NO_x$ 및 $SO_x$ 모두 압력이 높아질수록 저감율이 증가하였으나, 단독가스 실험과 비교하면 저감율이 감소함을 확인하였다. 이는 혼합가스 투입으로 인해 반응기 내부에 채운 물의 산성화가 빠르게 이루어졌기 때문이다.

• 건축역사연구
• /
• 제4권2호
• /
• pp.25-44
• /
• 1995

Bricks are the earliest man-made building materials. Small-size bar bricks were found in use in the Warring States Period(戰國時代) in China. During the Qin(秦) and the Han(漢) Dynasties, brick constructions were built on a larger scale, but most of them were tombs. In case of Korea, bricks were found in use in the Three Kingdoms Period, but also most of them were tombs. Starting from the Unified Silla Period(統一新羅時代), brick gradually became a universal practice to built Buddhist Pagodas with bar bricks. Brick pagodas emergence marked a stage where technological progress made it possible for man to built high-rise brick work, and their dvelopment further perfected masonry technique and enabled building technology to attain new heights. Though from the very start brick pagodas existed side by side with stone pagodas, at the enitial stage they were overshadowed by their wooden counterparts and stone counterparts, because masonry thechiques were then still rather primitive, while woodwork and stonework had already reached a fairly advaced stage. The pagodas in ancient Korea were closely related to the Chinese stupa, which consisted of three parts, namely, the base, the body and the spire. The fact was, soon after the stupas were introduced into Korea, the Korean stupas began to develop features of their own. Korean brick pagodas were made up of a single-storeyed square base, multi-storeyed square body with a small gate, and a steel post with several layers of lotus flower superimposed one on the other.

• Wind and Structures
• /
• 제11권5호
• /
• pp.361-376
• /
• 2008

This paper considers internal pressure fluctuations for a range of building volumes and dominant wall opening areas. The study recognizes that the air flow in and out of the dominant opening in the envelope generates Helmholtz resonance, which can amplify the internal pressure fluctuations compared to the external pressure, at the opening. Numerical methods were used to estimate fluctuating standard deviation and peak (i.e. design) internal pressures from full-scale measured external pressures. The ratios of standard deviation and peak internal pressures to the external pressures at a dominant windward wall opening of area, AW are presented in terms of the non-dimensional opening size to volume parameter, $S^*=(a_s/\bar{U}_h)^2(A_W^{3/2}/V_{Ie})$ where $a_s$ is the speed of sound, $\bar{U}_h$ is the mean wind speed at the top of the building and $V_{Ie}$ is the effective internal volume. The standard deviation of internal pressure exceeds the external pressures at the opening, for $S^*$ greater than about 0.75, showing increasing amplification with increasing $S^*$. The peak internal pressure can be expected to exceed the peak external pressure at the opening by 10% to 50%, for $S^*$ greater than about 5. A dominant leeward wall opening also produces similar fluctuating internal pressure characteristics.

• 대한한의학회지
• /
• 제29권4호
• /
• pp.213-217
• /
• 2008

Since at least the late 12th century, medical herbs grown naturally or cultivated in Korea have been referred to as 'HyangYak'(鄕藥, $Xi\bar{a}ngY\grave{a}o$). Herbs from other countries are referred to as 'DangYak'(唐藥, $D\bar{a}ngY\grave{a}o$). Some senior historians claim medicines made solely from HyangYak are purely Korean, since they originated and were developed fully within Korea. However, these localized medicines became abundant as the result of exchanges between Korea and other countries. Originally published in 1433, 'HyangYakJipSungBang' is the authoritative result of earlier writings of medical books using HyangYak. Comprised of a total of 85 volumes, it was large in scale and divided into three main sections: 1) a detailed description of the 703 kinds of HyangYak, 2) explanations of the 10,706 different herbal formulae and 959 types of symptoms or diseases, and 3) descriptions of the 1,416 various acupuncture and moxibustion formulae. It's noted that 'HyangYakJipSungBang' was not written all at once. In the process of its writing, the number of formulae increased through medical exchanges between Korea and China during the 15th century.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 A
• /
• pp.431-433
• /
• 2000

The hydroelectric Power plant of the KOWACO have been establishing and operating a full scale electric power facility, doing the largest generation during the flood period of the summer season. When the huge capacity generator is run like the Chung-Ju's hydroelectric Power plant, the generator current per generator flows a great current estimated at 5,900 A. The bus bar of a great current flows in cubicle, owing to the bus bar current Eddy current is created around magnetic substance and a local heating phenomenon occurs due to Joule heat finally. a local heating phenomenon still exists the danger of safety accident due to contact and accompanies losses enough to healing capacity inevitably. this study applies and examines related theory and numerical formula about the heating cause of a great current & enforces technical verification about the method of heating reduction previous managed at the site.

• International Journal of Quality Innovation
• /
• 제9권1호
• /
• pp.68-93
• /
• 2008

The steel bars account for a high percentage of material costs for the current construction projects. At the present time, most of the construction projects for the factories of thin-film transistor liquid crystal display (TFT-LCD) complete the transactions of steel bars when the suppliers ship the steel bars to the temporary storage/processing sites. This paper applies the buy-in concept in the Theory of Constraint (TOC) on the supply chain of steel bars. In this study, suppliers are required to establish warehouses at the construction sites and complete the transactions when the formed and processed steel bars are shipped into the factory sites. The aim is to find a win-win solution to meet with the expectations from constructors as they hope that there is no need to build up inventories but supply is ready at any time. Also, this paper compares and analyzes the traditional supply/inventory model of steel bars and the Demand-Pull (D-P) model under the TOC framework. It is proved that Vendor Management Inventory (VMI) in the D-P model is able to more effectively manage steel bars as a material.

• 한국추진공학회지
• /
• 제11권5호
• /
• pp.31-36
• /
• 2007

연소 압력이 70 bar인 고압 축소형 연소기의 연소성능 특성을 알아보았다. 모든 연소시험은 하드웨어의 손상 없이 성공적으로 이루어졌다. 분사기의 혼합특성과 분사기 배열이 연소성능에 큰 영향을 미치는 요소임을 파악하였다. 연소기의 특성속도는 외부 혼합보다 내부 혼합 분사기에서 더 크게 나타났으며 단위분사기당 추진제의 유량이 감소함에 따라 특성속도도 증가하였다. 추진제 매니폴드 및 연소실에서 측정된 압력 섭동은 평균 연소압력의 3% 이하로 연소안정성 기준치 보다 낮은 값을 보여 안정적인 연소기임을 보였다.

• 수산경영론집
• /
• 제35권1호
• /
• pp.117-132
• /
• 2004

This study attempts to suggest a new approach of the estimation of range and degree of fisheries damages caused by a large scale of reclamation undertaken in coastal area using the central limit theorem(CLT) in statistics. The key result of the study is the introduction of the new concept of critical variation of environmental factor($d_{c}$). The study defines $d_{c}$ as a standard deviation of the sample mean($\bar{X}$) of environmental factor(X), in other words, $\frac{\sigma}{ \sqrt{n}}$. The inner bound of $d_{c}$ could be the area of fisheries damages caused by public coastal undertaking. The study also defines the decreasing rate of fisheries production$\delta_{\varepsilon}$, in other words, degree of fisheries damages, as the rate of change in the distribution of sample mean(($\bar{X}$), caused by the continuous and constant variation of environmental factor. Therefore $\delta_{\varepsilon}$ can be easily calculated by the use of table of the standardized normal distribution.