• 한국세라믹학회지
• /
• 제34권7호
• /
• pp.703-712
• /
• 1997

The PTCR devices of BaTiO3 doped with Sb2O3, SiO2 were prepared by Liquid Addition Method(LPAM) where doping sources were used in the forms of Liquid. The amounts of doping in LPMA is smaller than that in solid state mixing method. Also the doping process in LPMA is very suitable for BaTiO3-based PTCR devices because it is easy to obtain homogeneous mixing and reproductivity. By optimizing the doping condition in BaTiO3 system, (0.09 mol% Sb2O3, 0.25 wt% SiO2 and 0.02 wt% MnO2) it was possible to fabricate BaTiO3-based PTCR devices whee the room-temperature resistivity and specific resistivity were 15{{{{ OMEGA }}cm and 2$\times$106 respectively.

• 한국전기전자재료학회논문지
• /
• 제16권8호
• /
• pp.676-680
• /
• 2003

In this study, to develop the low temperature sintering ceramics for piezoelectric transformer, PSN-PNN-PZT system ceramics were manufactured as a function of V$_2$O$_{5}$ addition, that is the low melting point oxide. Its dielectric and piezoelectric characteristics were investigated. With increasing the amount of V$_2$O$_{5}$ addition, electromechanical coupling factor(kp) and mechanical quality factor(Qm) were decreased. For piezoelectric transformer application, the 0.1wt% V$_2$O$_{5}$ added specimen sintered at 1,00$0^{\circ}C$ showed the proper value of $\varepsilon$r=1,590, kp=0.51 and Qm=748.m=748.

• 전기학회논문지
• /
• 제59권11호
• /
• pp.2021-2025
• /
• 2010

Electrical and structural properties were investigated on the effects of ZnO and the lead-free NKN-LST ceramics with the addition of ZnO were fabricated by a conventional mixed oxide method. A gradual change in the crystal and microstructure was observed with the increase of ZnO addition. For the NKN-LST-ZnO ceramics sintered at $1050^{\circ}C$, bulk density increased with the addition of ZnO and showed maximum value at addition 2.0mol% of ZnO. Curie temperature of the NKN-LST-ZnO ceramics slightly decreased with adding ZnO. The dielectric constant, piezoelectric constant ($d_{33}$) and electromechanical coupling factor ($k_p$) increased at the small amount of ZnO addition, which might be due to the increase in density. The high piezoelectric properties = 153 pC/N, electromechanical coupling factor = 0.484 and dielectric constant = 2883 were obtained for the NKN-LST+0.5ZnO ceramics sintered at $1050^{\circ}C$ for 2h.

• Journal of Animal Science and Technology
• /
• 제59권5호
• /
• pp.10.1-10.11
• /
• 2017

Background: Transfer of pesticides from environment to animal products is inevitable, so the purpose of the present work was to evaluate phosalone consumption via feeding with or without sodium bentonite (SB) on performance, blood metabolites and its transition to milk of Iranian Baluchi sheep. Methods: Twenty Baluchi ewes were divided into four treatments (P1 as control, P2, P3, and P4) of five animals in which phosalone, an organophosphate pesticide, was given via diet (only for P2 and P3) at a dose of 280 mg/sheep/day for 63 consecutive days. The SB (32 g/sheep/day; for P3 and P4) was also evaluated for its ability to reduce deleterious effects of phosalone in the sheep diets. The control group (P1) did not receive any phosalone and SB during the experiment. Sampling was conducted in two periods of time including weeks 5 and 9. Results: Phosalone residues were observed in the milk samples of P2 and P3 groups during two sampling periods. During period 1, the transfer rate of phosalone from feed to milk was 0.23 and 0.02%, respectively for the contaminated diets (P2 and P3), which is relatively similar to period 2 (0.22 and 0.02%). Only 0.34 (period 1) and 0. 36% (period 2) of phosalone residue are excreted in the feces of P2 group following its daily consumption. Transfer of phosalone from feed to milk was affected (P < 0.05) by the dietary inclusion of a commercial SB, as it (SB) decreased excretion of phosalone via milk (P3). The phosalone and SB alone or together had no significant effect (P > 0.05) on the dry matter intake (DMI) and body weight (BW) gain, but feed efficiency, milk production, milk fat, dry matter (DM) and organic matter (OM) digestibility, acetylcholinesterase (AChE) inhibitory activity, hemoglobin (Hb), red blood cell (RBC), serum glutamic pyruvic transaminase (SGPT), serum glutamic oxaloacetic transaminase (SGOT), albumin and mean corpuscular hemoglobin concentration (MCHC) affected by the treatments in period 1 or 2 (P < 0.05). The Hb, RBC, and MCHC were significantly decreased (P < 0.05) by about 9.72, 20.77, and 9.71%, respectively in the group P2 as compared to those of the control group during period 1. The AChE inhibitory activity (period 1 and 2) significantly increased when phosalone administered via the diet (P < 0.05). Conclusions: Although there were no adverse effects on the performance of sheep following the intake of phosalone alone (P2 vs. P1), but other research on the long and short times to the phosalone in high and low doses with more animals is suggested. Overall, compared to the control group, addition of SB in the diet of sheep improved nutrient digestibility, animal performance, and milk health.

• Corrosion Science and Technology
• /
• 제18권6호
• /
• pp.243-252
• /
• 2019

The pitting corrosion and inhibition studies of AZ31B magnesium alloy were investigated in the alkaline solution (pH12) with chloride and inhibitors. The corrosion behavior of passive film with/without Cl^- in the alkaline electrolyte were conducted by polarization curve and immersion tests in the presence of various additives (inhibitors) to clarify the inhibition efficiency of pitting corrosion at higher potential region. Critical concentration of pitting corrosion for Mg alloy was evaluated with 0.005 M NaCl in 0.01 M NaOH on the anodic polarization behavior. Critical pitting of AZ31B Mg alloy in 0.01 M NaOH is a function of chlorides; E_pit = - 1.36 - 0.2 log [Cl^-]. When the Sodium Benzoate (SB) was only used as an inhibitor, a few metastable pits developed on the Mg surface by an immersion test despite no pitting corrosion on the polarization curve meaning that adsorption of SB on the surface is insufficient protection from pitting corrosion in the presence of chloride. The role of SB and Sodium Dodecylbenzenesulfonate (SDBS) inhibitors for the Mg alloy surface in the presence of chloride was suppressed from pitting corrosion to co-adsorb on the Mg alloy surface with strong formation of passive film preventing pitting corrosion.

• 한국전기전자재료학회논문지
• /
• 제29권4호
• /
• pp.205-209
• /
• 2016

In this paper, piezoelectric ceramics with the composition of $(Na_{0.525}K_{0.4425}Li_{0.0375})(Nb_{0.8975}Sb_{0.065}Ta_{0.0375})O_3+0.3wt%\;CoO+x\;CuO$ ($0.005{\leq}x{\leq}0.025$) (abbreviated to NKL-NST) were fabricated for ultrasonic sensor application. The effects of CuO addition and sintering on the microstructure and the piezoelectric properties of the NKL-NST ceramics were systematically studied. Excellent piezoelectric properties such as electromchanical coupling $factor(k_p)=0.415$, piezoelectric constant $(d_{33})=166pC/N$ and piezoelectric figure of merit $d_{{33}*}g_{33}=5.47pm^2/N$ were obtained from the 2.5 mol% CuO doped NKL-NST+0.3 wt%CoO ceramics sintered at $1,000^{\circ}C$ for 3 h.

• Journal of the Optical Society of Korea
• /
• 제16권4호
• /
• pp.414-417
• /
• 2012

The effect of cerium concentration and the addition of $Sb_2O_3$ on the light emission of cerium-contained glass were investigated. The glass matrix composition was $20Y_2O_3-25Al_2O_3-55SiO_2$, the $CeO_2$ concentration ranged from 0.05 to 0.5 mol%, and $Sb_2O_3$ was added at concentrations of 0.02 to 0.1 mol%. The $Ce^{3+}$ and $Ce^{4+}$ absorption bands were observed at approximately 330 nm and 240 nm, respectively. A broad emission band at 400 nm, due to the 4f-5d transition of the $Ce^{3+}$ ion, was observed under illumination by a UV light at 330 nm. The photoluminescence intensity of $Ce^{3+}$ had a maximum value at a $CeO_2$ concentration of 0.1 mol%. Adding $Sb_2O_3$ decreased the $Ce^{4+}$ absorption intensity and enhanced the light emission intensity of $Ce^{3+}$ by about 45%.

• 대한화학회지
• /
• 제29권2호
• /
• pp.129-136
• /
• 1985

공기-아세틸렌 불꽃 원자 흡수분광법으로 칼슘분석을 하는 경우 비교적 방해가 큰 것은 지르코늄, 주석, 알루미늄, 안티몬 등 양이온과 황산이온, 바나듐산이온, 규산이온 등 음이온이다. 여기에 해방제로서 세륨을 사용하면 이들 방해 효과를 제거할 수 있음을 알게 되었다. 칼슘과 같은 농도($3.0 {\times} 10^{-4}$M)의 이 방해이온들에 의한 방해는 방해이온 농도의 2배의 세륨에 의하여 완전히 해방됨을 보았고 방해 양이온혼합물(지르코늄, 주석, 알루미늄, 안티몬), 방해음이온 혼합물(황산이온, 바나듐산이온, 규산이온)또는 방해양이온 음이온 혼합물의 방해는 각각의 양이온 혹은 음이온에 의한 방해보다 더 큰 방해를 주는데 세륨($1.5 {\times} 10^{-2}$M)에 의한 해방효과는 방해양이온, 음이온 혼합물의 농도가 각각 $3.0 {\times} 10^{-3}$M까지 증가하여도 거의 변하지 않고 좋았다.

• 한국전기전자재료학회논문지
• /
• 제24권9호
• /
• pp.728-732
• /
• 2011

In this study, piezoelectric and dielectric properties of Lead-free $0.97[(K_{0.5}Na_{0.5})(Nb_{0.97}Sb_{0.03})O_3]+0.03[(Bi_{0.5}K_{0.5})TiO_3]$ (abbreviated as 0.97NKNS-0.03BKT)ceramics synthesized by conventional solid-state reaction process were investigated as a function of $K_{5.4}Cu_{1.3}Ta_{10}O_{29}$ addition. The results indicated that the $K_{5.4}Cu_{1.3}Ta_{10}O_{29}$ addition significantly improved the sinterability, grain growth and piezoelctric properties of 0.97NKNS-0.03BKT ceramics. The optimum values as planar piezoelectric coupling coefficient ($k_p$= 0.355), piezoelectric constant ($d_{33}$= 207 pC/N) and mechanical quality factor ($Q_m$= 128) were obtained when 0.009KCT was added. The electromechanical coupling factor($k_p$) was slightly decreased according to the increasing temperature.

• 한국전기전자재료학회논문지
• /
• 제17권11호
• /
• pp.1174-1177
• /
• 2004

The dielectric and piezoelectric properties of silver added 0.96 Pb(Z $r_{0.52}$ $Ti_{0.48}$) $O_3$-0.04 Pb(Mn,W,Sb,Nb)$_3$ ceramics were examined. By varying the contents of silver(0.0, 0.4, 1.0 mol%), the effect of silver addition on PZT-PMWSN ceramics was investigated at various sintering temperature(900, 1000, 1100 $^{\circ}C$). As increasing silver contents, the relative dielectric constant was increased and sinterability was enhanced. At the specimen with 0.4 mol% Ag and sintered at 1000 $^{\circ}C$, electromechanical coupling factor( $k_{p}$), mechanical quality factor( $Q_{m}$), dielectric constant($\varepsilon$$_{r}$) and dielectric loss were 0.502, 811, 991, 0.006, respectively. The results showed that the PZT-PMWSN/Ag composites have enhanced piezoelectic and dielectric properties and sintering temperature was lowered.red.