• Asian-Australasian Journal of Animal Sciences
• /
• v.16 no.6
• /
• pp.903-909
• /
• 2003

For the last two decades, energy utilization of growing chicks has been studied more and more. This paper focuses on the energy utilization estimated by the metabolizable energy (ME) values and the efficiency at which ME is used for growth of chicks under various nutritional environment. Degree of saturation of dietary fats is responsible for nitrogen-corrected apparent metabolizable energy (AMEn) of fats. The effect of dietary fat sources on heat production depends on the kind of unsaturated fatty acids as well as the degree of saturation. Medium chain triglyceride shows lower AME and net energy than long chain triglyceride. Phytase as feed additives increases the AME values of the diet along with improvement of the phosphorous utilization. Ostriches have higher ability to metabolize the energy of fiber-rich foodstuffs than fowls. Their higher ability seems to be associated with fermentation of fiber in the hindgut. Proportions of macronutrients in the diets have influenced not only the gain of body protein and energy but also the oxidative phosphorylation of the chicken liver. Essential amino acids deficiency reduces ME/GE (energy metabolizability) little, if any. Growing chicks respond to a deficiency of single essential amino acids with the reduction of energy retained as protein and increased energy retained as fat. Thus, energy retention is proportional to ME intake despite deficiency, and efficiency of ME utilization is not affected by deficiency of amino acids. Effect of oral administration of clenbuterol, a beta-adrenergic agonist, on the utilization of ME varies with the dose of the agents. Although the heat production related to eating behavior has been estimated less than 5% of ME, tube-feeding diets decreases HI by about 30%.

• Korean Journal of Materials Research
• /
• v.21 no.4
• /
• pp.225-231
• /
• 2011

The effect of ferrous/ferric molar ratio on the formation of nano-sized magnetite particles was investigated by a co-precipitation method. Ferrous sulfate and ferric sulfate were used as iron sources and sodium hydroxide was used as a precipitant. In this experiment, the variables were the ferrous/ferric molar ratio (1.0, 1.25, 2.5 and 5.0) and the equivalent ratio (0.10, 0.25, 0.50, 0.75, 1.0, 2.0 and 3.0), while the reaction temperature ($25^{\circ}C$) and reaction time (30 min.) were fixed. Argon gas was flowed during the reactions to prevent the $Fe^{2+}$ from oxidizing in the air. Single-phase magnetite was synthesized when the equivalent ratio was above 2.0 with the ferrous/ferric molar ratios. However, goethite and magnetite were synthesized when the equivalent ratio was 1.0. The crystallinity of magnetite increased as the equivalent ratio increased up to 3.0. The crystallite size (5.6 to 11.6 nm), median particle size (15.4 to 19.5 nm), and saturation magnetization (43 to 71 $emu.g^{-1}$) changed depending on the ferrous/ferric molar ratio. The highest saturation magnetization (71 $emu.g^{-1}$) was obtained when the equivalent ratio was 3.0 and the ferrous/ferric molar ratio was 2.5.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.36D no.7
• /
• pp.66-79
• /
• 1999

We investigate the effects of high input power on the performance of optical bistable symmetric self-electooptic effect devices (S-SEEDs) using extremely shallow quantum wells (ESQWs). In this study, we consider the four ESQWs SEEDs; anti-reflection (AR)-coated ESQWs S-SEED, back-to-back AR coated ESQWs S-SEED, asymmetric F뮤교-Perot (AFP) ESQWs S-SEED, and back-to-back AFP-ESQWs S-SEED. As the input power increases, device performances such as on/off contrast ratio, on/off reflectivity difference are seriously degraded because of ohmic heating and exciton saturation. On the other hand, switching speed of the device increases up to certain value and then begins to decrease. With reasonable optimization of the input power for the best switching speed operation of the devices in a cascading optical interconnection system, we simulate and analyze the system bit-rate of the various ESQWs S-SEEDs, for a mesa of $5{\times}5{\mu}m^2$ size, changing the namber of quantum wells for the external bias of 0 V and -5V.

• Journal of Mechanical Science and Technology
• /
• v.18 no.12
• /
• pp.2284-2293
• /
• 2004

The evaporation heat transfer coefficient h$\_$r/ and frictional pressure drop Δp$\_$f/ of refrigerant R-134a flowing in the oblong shell and plate heat exchanger were investigated experimentally in this study. Four vertical counterflow channels were formed in the oblong shell and plate heat exchanger by four plates of geometry with a corrugated sinusoid shape of a 45 chevron angle. Upflow of refrigerant R-134a boils in two channels receiving heat from downflow of hot water in other channels. The effects of the refrigerant mass flux, average heat flux, refrigerant saturation temperature and vapor quality of R-134a were explored in detail. Similar to the case of a plate heat exchanger, even at a very low Reynolds number, the flow in the oblong shell and plate heat exchanger remains turbulent. The results indicate that the evaporation heat transfer coefficient h$\_$r/ and pressure drop Δp$\_$f/ increase with the vapor quality. A rise in the refrigerant mass flux causes an increase in the h$\_$r/ and Δp$\_$f/. But the effect of the average heat flux does not show significant effect on the h$\_$r/ and Δp$\_$f/. Finally, at a higher saturation temperature, both the h$\_$r/ and Δp$\_$f/ are found to be lower. The empirical correlations are also provided for the measured heat transfer coefficient and pressure drop in terms of the Nusselt number and friction factor.

• Journal of the Korean Society of Food Culture
• /
• v.18 no.6
• /
• pp.575-583
• /
• 2003

To evaluate the effect of cereal supplementation on children's iron nutritional status of Korean institutionalized was designed. Dietary survey was carried out methods of food weighting in the breakfast or/and dinner, and record interview in lunch (n=74). A nutritional intervention study was carried out through supplementing cereal for 4 weeks in 24 children of 1 institution from 4 to 12 years. The children received 3.6mg elemental Fe(as 100g cereal) per day. Blood samples were drawn before and after supplementation. Nutrients which children's intake was less than two-thirds of Korean RDA were Vit A, Vit B1, Vit B2, Ca and Fe. The mean daily intakes of iron were 5.1mg for male and 4.9mg for female and 52.3% for male and 45.4% for female of Korean RDA. The proportions of children with iron depletion assessed by TIBC(>360mg/dl) and serum ferritin(<20ng/ml) were 56.6% and 58.7%, respectively. The proportions of children with the iron deficient erythropoiesis assessed by serum iron(<70ml/dl), Hb(<12g/dl), and Hct(<36%) were 76.0%, 58.7%, and 64.0%, respectively. After cereal supplementation, in anemic children, levels of Hct(p<0.001), serum iron(p<0.001) and transferrin saturation(p<0.001) were significantly increased. The effect of cereal supplementation in children with iron deficient erythropoeisis was more effective to improve the iron nutritional status than children with iron depletion. It was concluded that cereal supplementation program in anemic children was also effective to improve iron nutritional status.

• Journal of Fashion Business
• /
• v.11 no.2
• /
• pp.92-101
• /
• 2007

This research was carried out following the preceding research on natural cellulose fabrics dyed with extract of fresh african marigold petals. Dyeability on fabrics was tested by dyeing with wool and silk which are natural protein fibers. Dyeing tests were carried out under different pH of the dye solution and mordants, examining the changes in the surface color, K/S value, and maximum absorption wavelength. The probability of improving dyeability was investigated by pre-mordanting with pre-treated chitosan. Wool fabrics showed color tone of medium or less saturation and brightness, in dark yellow color series. An orange color of high saturation was only obtained by tin mordanting. Wool showed higher K/S value than cellulose fibers. In summary, marigold dye has more affinity for protein fibers. It showed better dye effect in wool than silk. The chitosan pre-treatment and pre-mordanting lowered the K/S value of wool, which showed that chitosan pre-treatment does not improve dye uptake. However, different from the dyeing carried out by pre-mordanting without pre-treatment with chitosan, more diversified colors could be obtained by mordants. Therefore, for the dyeing natural protein fibers with marigold extract, post-mordanting does not require chitosan pre-treatment. However, pre-mordanting with chitosan pre-treatment could implement diverse colors. Considering its dyeing behaviors which are similar in both natural cellulose and protein fibers, african marigold extracts can be evaluated as a stable and highly practical dye.

• Journal of Magnetics
• /
• v.15 no.4
• /
• pp.179-184
• /
• 2010

We have investigated the effects of post annealing on iron oxide nanoparticles synthesized by the novel hydrothermal synthesis method with the $FeSO_4{\cdot}7H_2O$. To investigate the post annealing effect, the as-synthesized iron oxide nanoparticles were annealed at different temperatures in a vacuum chamber. The morphological, structural and magnetic properties of the iron oxide nanoparticles were investigated with high resolution X-ray powder diffraction (XRD), high resolution transmission electron microscopy (HRTEM), Mossbauer spectroscopy, and vibrating sample magnetometer analysis. According to the XRD and HRTEM analysis results, as-synthesized iron oxide nanoparticles were only magnetite ($Fe_3O_4$) phase with face-centered cubic structure but post annealed iron oxide nanoparticles at $700^{\circ}C$ were mainly magnetite phase with trivial maghemite ($\gamma-Fe_2O_3$) phase which was induced in the post annealing treatment. The crystallinity of the iron oxide nanoparticles is enhanced by the post annealing treatment. The particle size of the as-synthesized iron oxide nanoparticles was about 5 nm and the particle shape was almost spherical. But the particle size of the post annealed iron oxide nanoparticles at $700^{\circ}C$ was around 25 nm and the particle shape was spherical and irregular. The as-synthesized iron oxide nanoparticles showed superparamagnetic behavior, but post annealed iron oxide nanoparticles at $700^{\circ}C$ did not show superparamagnetic behavior due to the increase of particle size by post annealing treatment. The saturation of magnetization of the as-synthesized nanoparticles, post annealed nanoparticles at $500^{\circ}C$, and post annealed nanoparticles at $700^{\circ}C$ was found to be 3.7 emu/g, 6.1 emu/g, and 7.5 emu/g, respectively. The much smaller saturation magnetization value than one of bulk magnetite can be attributed to spin disorder and/or spin canting, spin pinning at the nanoparticle surface.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.21 no.1
• /
• pp.16-22
• /
• 2009

In order to investigate $CO_2$ heat transfer coefficient and pressure drop by PAG oil concentration during $CO_2$ evaporation, the experiment on evaporation heat transfer characteristics in a mini-channels were performed. The experimental apparatus consisted of a test section, a DC power supply, a heater, a chiller, a mass flow meter, a pump and a measurement system. Experiment was conducted for various mass fluxes($300{\sim}800kg/m^{2}s$), heat fluxes($10{\sim}40kW/m^2$) saturation temperatures($-5{\sim}5^{\circ}C$), and PAG oil concentration(0, 3, 5wt%). The variation of the heat transfer coefficient was different according to the oil concentration. With the increase of the oil concentration, the evaporation heat transfer coefficient decreased and the delay of dryout by oil addition was found. Pressure drop increased with the increase of the oil concentration and heat flux, and the decrease of saturation temperature.

• International Journal of Air-Conditioning and Refrigeration
• /
• v.12 no.3
• /
• pp.158-167
• /
• 2004

Condensation heat transfer experiments were conducted with a oblong shell and plate heat exchanger without oil in a refrigerant loop using R-134a. An experimental refrigerant loop has been developed to measure the condensation heat transfer coefficient $h_r$ and frictional pressure drop ${\Delta}p_f$ of R-134a in a vertical oblong shell and plate heat exchanger. Four vertical counter flow channels were formed in the oblong shell and plate heat exchanger by four plates having a corrugated sinusoid shape of a $45^{\circ}$ chevron angle. The effects of the refrigerant mass flux, average heat flux, refrigerant saturation temperature and vapor quality were explored in detail. Similar to the case of a plate heat exchanger, even at a very low Reynolds number, the flow in the oblong shell and plate heat exchanger remains turbulent. The results indicate that the condensation heat transfer coefficients and pressure drops increase with the vapor quality. A rise in the refrigerant mass flux causes an increase in the $h_r\;and\;{\Delta}p_f$. Also, a rise in the average heat flux causes an increase in the $h_r$. But the effect of the average heat flux does not show significant effect on the ${\Delta}p_f$. On the other hand, at a higher saturation temperature, both the $h_r\;and\;{\Delta}p_f$. found to be lower. Based on the present data, the empirical correlations are provided in terms of the Nusselt number and friction factor.

• Journal of Convergence for Information Technology
• /
• v.11 no.7
• /
• pp.104-110
• /
• 2021

A novel selective oxidation process has been developed for low source/drain (S/D) series resistance of the fin channel metal oxide semiconductor field effect transistor (MOSFET). Using this technique, the selective oxidation fin-channel MOSFET (SoxFET) has the gate-all-around structure and gradually enhanced S/D extension regions. The SoxFET demonstrated over 70% reduction in S/D series resistance compared to the control device. Moreover, it was found that the SoxFET behaved better in performance, not only a higher drive current but also higher transconductances with suppressing subthreshold swing and drain induced barrier lowering (DIBL) characteristics, than the control device. The saturation current, threshold voltage, peak linear transconductance, peak saturation transconductance, subthreshold swing, and DIBL for the fabricated SoxFET are 305 ㎂/㎛, 0.33 V, 13.5 𝜇S, 76.4 𝜇S, 78 mV/dec, and 62 mV/V, respectively.