• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1991년도 추계학술대회 논문집
• /
• pp.44-47
• /
• 1991

Electron injection and memory retention chracteristics of the MNOS devices with thin oxide layer of 23${\AA}$ thick and silicon nitride layer of 1000${\AA}$ thick which are fabricated for this experiment. As a result, pulse amplitude increase oxide current is dominated in linearly increasing region of $\Delta$V$\_$FB/the decreasing region after saturation was due to the increased silicon nirtide current. In low pulse ampiltude $\Delta$V$\_$FB/ is not variated on temperature, but as temperature and pulse amplitude increase. $\Delta$V$\_$FB/ is decreased after saturation. And the decay rate during 10$^4$sec after electron injection was ohiefly dominated by the back tunneling of emission from memory trap to silicon. Memory retention characteristics in V$\_$FB/ stage was better than that of OV retention regardless of injection conditions.

• Nuclear Engineering and Technology
• /
• 제29권5호
• /
• pp.361-367
• /
• 1997

The phase separation in ferrite phase of duplex stainless steel is the primary cause of thermal aging embrittlement of the LWR primary pressure boundary components. In this study the phase separation of simulated duplex stainless steel was detected by Mossbauer spectroscopy and magnetic property analysis by VSM(Vibrating Specimen Magnetometer). The simulated duplex stainless steels, Fe-Cr binary, Fe-Cr-Ni ternary, and Fe-Cr-Ni-Si quarternary allots, were aged at 370 and 40$0^{\circ}C$ up to 5,340 hours. It was observed from Mossbauer spectra analysis that internal magnetic field increases with aging time and from VSM that the specific saturation magnetization and Curie temperature increase with aging time. These result are indicative that phase separation into Fe-rich region and Cr-rich region is caused by thermal aging in the temperature range of 370~40$0^{\circ}C$ In cases of specimens containing Ni, the increase of specific saturation magnetization is much higher. This implies that Ni seems to promote Fe-Cr interdiffusion, which accelerates the phase separation into Fe-rich $\alpha$ phase and Cr-rich $\alpha$' phase.

• 한국초전도ㆍ저온공학회논문지
• /
• 제3권2호
• /
• pp.77-83
• /
• 2001

The thermal characteristics of solid nitrogen are investigated by experiment and analysis for the purpose of evaluating its feasibility as a cooling medium for HTS (high T$_{c}$ superconductor) magnets. A cryostat to refrigerate a liquid-nitrogen container well below its freezing temperature with a 2-stage GM cryocooler is designed and constructed. The spatial distribution of temperature is measure as a function of time during the freezing and melting processes. from which the thermal diffusivity of solid nitrogen can be approximately calculated. the freezing process is formulated and solved by the integral method with an assumption of phase equilibrium at the solid-liquid interface and experimental observation. It may be concluded that the thermal diffusion in solid phase is much slower than in liquid and the degree of super-saturation is quite severe in the solidification of nitrogen.n.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2007년도 추계학술대회 논문집
• /
• pp.594-596
• /
• 2007

Using an oedometer cell instrumented to measure the evolution of electromagnetic properties, small strain stiffness, and temperature, we conducted consolidation tests on four types of sediments. The tested specimens include sediments with different gas hydrate saturation at four stages of loading. The test results show that the electromagnetic and mechanical properties of hydrate-bearing marine sediments are governed by the vertical effective stress, stress history, porosity, hydrate saturation, fabric, ionic concentration of the pore fluid, and temperature. The results also show that permittivity and electrical conductivity data can be combined to estimate hydrate volume fraction in laboratory sediments, methodology that might eventually be extended for estimation of hydrate concentrations in field settings.

• 대한설비공학회지:설비저널
• /
• 제16권5호
• /
• pp.477-483
• /
• 1987

A FORTRAN code has been developed to calculate thermodynamic properties of 12 kinds of refrigerants. Input variables are temperature and pressure or temperature only depending on the saturation. The program output properties are specific volume, saturation pressure, enthalpy, entropy, specific heats and speed of sound. Sample calculations show that output properties are in very good agreements with thermodynamic tables and charts.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2005년도 추계종합학술대회
• /
• pp.677-680
• /
• 2005

유체의 상변화를 이용하는 냉난방장치 등의 열장치에 대한 열역학적인 성능평가는 열역학적 성질들에 대한 구체적인 수치값을 필요로 한다. 그러나 이러한 열역학적 성질들을 제공하는 증기표를 그대로는 사용할 수 없기 때문에 효과적인 모델링이 필요하다. 본 연구에서는 신경회로망의 함수근사 특성을 이용하여 냉방장치의 매질로 사용되는 냉매(R12)의 포화증기 영역을 모델링하였다. 냉매 R12의 포화증기 영역의 함수근사 해석을 위하여 1개의 노드를 가진 입력층에 대하여 7개의 노드를 가진 출력층을 기본으로 하여, 각각 10개와 20개의 노드를 가진 두 개의 은닉층을 가진 회로망을 구성하였다. 또한 입력이 온도와 압력 두 가지의 경우에 대하여 검토하였다. 제안된 신경회로망을 사용한 결과 엔탈피, 엔트로피의 백분율오차가 대부분 ${\pm}$0.005%, 비체적은 ${\pm}$0.02%, 압력과 온도는 특별한 몇 개를 제외하고는 ${\pm}$0.02% 범위 내로 수렴되었다. 이 결과로부터 냉매를 함수근사하는데 있어서 신경회로망이 아주 강력한 수단이 될 수 있음을 확인하였다.

• 펄프종이기술
• /
• 제41권3호
• /
• pp.49-59
• /
• 2009

The bast fibers of paper mulberry were dyed by using sappan wood, gardenia, and gallnut extracted under various extraction conditions. The surface absorption rates, color, and sunlight fastness of the dyed fibers were compared to those of the dyed cotton and silk. The K/S values of silk showed the highest values, followed by gallnut, gardenia, and sappan wood. The optimum extraction conditions of the dye materials were 20 g/L (input amount of dye materials per liter), $90^{\circ}C$ (extraction temperature), and 30 minutes (extraction time). The values of saturation were observed to increase with the increase of the amount of dye materials, extraction time, and extration temperature. However, no effect were found on the values of hue and lightness. In all samples, the developed colors dyed by sappan wood and gardenia were the series of YR, and Y, respectively. The colors of dyed cotton and bast fibers of paper mulberry by gallnut were the series of Y and the dyed silk showed the series of YR. The values of saturation of the bast fibers of paper mulberry by sappan wood and gardenia showed the highest values of saturation, followed by cotton, and silk. In the case of gallnut, cotton showed the highest values of saturation, followed by the bast fibers of paper mulberry, and silk. The sunlight fastness were not improved in all dyeing conditions.

• 비파괴검사학회지
• /
• 제20권5호
• /
• pp.438-444
• /
• 2000

WC-Co 초경합금의 항자력과 자기포화도를 평가하여 합금조직과 이에 따른 기계적 성질의 예측에 관해 연구하였다. WC 입경이 다르고 탄소함량 및 소결온도가 다른 WC-8%-Co 초경합금을 분말 야금법에 의해 제조하였다. 항자력과 자기포화도와 같은 WC-Co 합금의 자기적 특성은 합금조성 및 조직에 크게 의존하였다. 미소한 합금탄소량의 변화와 WC 입도의 차이에 의해서도 WC-Co 합금의 자기적 특성과 경도 및 항절력이 크게 변화하였다. WC 입도가 미세할수록 소결합금의 항자력과 경도는 증가하였고, 항자력은 경도의 증가와 비례하였다. WC-8%Co 합금의 화학 양론적 조성 아래로 카본함량이 감소하면 자기포화도와 항절력이 떨어지고 $\eta$상의 체적률도 꾸준히 증가하였다. WC-Co 합금에 있어서 자기포화도는 항자력과 반비례하였다.

• 한국자동차공학회논문집
• /
• 제16권3호
• /
• pp.30-37
• /
• 2008

The evaporation pressure drop of $CO_2$ (R-744) in horizontal tubes was investigated experimentally. The experiments were conducted without oil in a closed refrigerant loop which was driven by a magnetic gear pump. The main components of the refrigerant loop are a receiver, a variable-speed pump, a mass flow meter, a pre-heater and evaporator (test section). The test section consists of a smooth, horizontal stainless steel tube of 7.75 and 4.57 mm inner diameter. The experiments were conducted at saturation temperature of $-5^{\circ}C\;to\;5^{\circ}C$, and heat flux of 10 to $40kW/m^2$. The test results showed the evaporation pressure drop of $CO_2$ are highly dependent on the vapor quality, heat flux and saturation temperature. The pressure drop measured during the evaporation process of $CO_2$ increases with increased mass flux, and decreases as the saturation temperature increased. The evaporation pressure drop of $CO_2$ is very lower than that of R-22. In comparison with test results and existing correlations, the best fit of the present experimental data is obtained with the correlation of Choi et al. But existing correlations failed to predict the evaporation pressure drop of $CO_2$. Therefore, it is necessary to develop reliable and accurate predictions determining the evaporation pressure drop of $CO_2$ in a horizontal tube.

• 설비공학논문집
• /
• 제25권2호
• /
• pp.101-108
• /
• 2013

This paper is presented an experimental study of flow boiling heat transfer characteristics of ammonia, and is focused on pressure gradient and heat transfer coefficient of the refrigerant flow inside horizontal small tube with inner diameter of 3.0 mm and length of 2000 mm. The direct heating method is applied for supplying heat to the refrigerant, where the test tube is uniformly heated by electric current. The local heat transfer coefficients were obtained over a heat flux range of 20 to $80kW/m^2$, a mass flux range of 50 to $500kg/m^2s$, a saturation temperature range of 0 to $10^{\circ}C$, and quality up to 1.0. The pressure drops increase with increasing mass flux and heat flux, and with decreasing saturation temperature. The heat transfer coefficients increase with increasing mass flux and saturation temperature in middle and high quality region. And the local heat transfer coefficient increase with increasing heat flux in low quality region. The heat transfer coefficient of the experimental result was compared with six existing heat transfer coefficient correlation. A new boiling heat transfer coefficient correlation based on the superposition model for ammonia in small tubes is developed average deviation of -0.17% and mean deviation of 10.85%.