• 제목/요약/키워드: Saturation Property

검색결과 169건 처리시간 0.023초

자기적 방법에 의한 0.85% 탄소강의 열처리에 따른 미세조직 및 기계적 성질 평가 (Evaluation of Microstructures and Mechanical Property of Variously Heat Treated 0.85% Carbon Steel by Magnetic Method)

  • 변재원;권숙인
    • 한국재료학회지
    • /
    • 제13권2호
    • /
    • pp.81-87
    • /
    • 2003
  • Microstructures and mechanical properties of variously heat treated 0.85% carbon steel(eutectoid steel) were evaluated by magnetic property measurements. Microstructural analysis (pearlite interstellar spacing), measurement of mechanical properties(Rockwell hardness, yield stress, fracture stress) and magnetic properties(coercivity, remanence, hysteresis loss, saturation magnetization) were performed to clarify mutual relationships among these parameters. Water quenched specimens with martensite structure showed much higher coercivity and remanence than air cooled or furnace cooled specimens with pearlite structure. The linear dependence of coercivity and remanence on pearlite interlamellar spacing as well as on Rockwell hardness, yield stress and fracture stress was observed in the pearlitic steel. Hysteresis loss and saturation magnetization showed no distinct trend with pearlite interlamellar spacing.

항자력과 자기포화도에 의한 WC-8%Co 초경합금의 기계적 성질 평가 (The Evaluation of Mechanical Property of WC-8%Co Alloys by Coercive Force and Magnetic Saturation)

  • 안동길
    • 비파괴검사학회지
    • /
    • 제20권5호
    • /
    • pp.438-444
    • /
    • 2000
  • WC-Co 초경합금의 항자력과 자기포화도를 평가하여 합금조직과 이에 따른 기계적 성질의 예측에 관해 연구하였다. WC 입경이 다르고 탄소함량 및 소결온도가 다른 WC-8%-Co 초경합금을 분말 야금법에 의해 제조하였다. 항자력과 자기포화도와 같은 WC-Co 합금의 자기적 특성은 합금조성 및 조직에 크게 의존하였다. 미소한 합금탄소량의 변화와 WC 입도의 차이에 의해서도 WC-Co 합금의 자기적 특성과 경도 및 항절력이 크게 변화하였다. WC 입도가 미세할수록 소결합금의 항자력과 경도는 증가하였고, 항자력은 경도의 증가와 비례하였다. WC-8%Co 합금의 화학 양론적 조성 아래로 카본함량이 감소하면 자기포화도와 항절력이 떨어지고 $\eta$상의 체적률도 꾸준히 증가하였다. WC-Co 합금에 있어서 자기포화도는 항자력과 반비례하였다.

  • PDF

다성분 탄화수소혼합물 포화물성해석 수렴도 향상 연구 (Study on the Convergency Improvement Method for the Saturation-Property Calculation of Multi-Component Hydrocarbon Systems)

  • 신창훈;안승희;이정환;성원모
    • 대한기계학회논문집B
    • /
    • 제34권10호
    • /
    • pp.947-955
    • /
    • 2010
  • 대부분의 석유 가스전은 탄화수소혼합물과 일반기체 등 저류층 내부 유체의 성분조성에 따라 저류층내 상거동 특성이 매우 민감하게 변화한다. 석유 가스전의 평가와 개발 생산계획을 수립함에 있어, 이러한 상거동에 따른 기체와 액체의 성분비 결정과 석유와 가스의 이상유동 해석을 위한 저류유체의 PVT관계 및 포화물성의 규명은 필수적이다. 이중에서 특히, 포화물성의 계산은 수렴성이 나빠, 이상 유동의 해석적 연구에 있어서 많은 어려움을 초래하는 원인이 되고 있다. 이에 본 연구에서는 포화물성 의 계산에 있어서 수렴도 향상을 위한 새로운 초기값 추정 방법과 근 탐색 알고리듬을 제안하고, 성능비교 등을 통한 수렴도 영향인자에 대한 분석을 시도하였다. 결과적으로, 제안된 방법을 통해 포화물성 해석 수렴성을 개선하였고 GUI 기반의 새로운 다성분 다상거동해석 시뮬레이터의 개발에 적용하였다.

절삭공구용 서멧의 자기적 특성과 기계적 성질의 관계 (Relationship between Magnetic and Mechanical Properties of Cermet Tools)

  • 안동길;이정희
    • 비파괴검사학회지
    • /
    • 제20권3호
    • /
    • pp.231-237
    • /
    • 2000
  • 공업용 서멧 절삭공구는 다성분계 탄화물과 강자성체(ferromagnetic material)인 철족의 Co, Ni 결합상 금속으로 구성 되어 있다. 본 연구에서는 새로운 시도로서 금속 결합상 량과 소결조건에 따른 TiCN계 서멧의 자기적 특성의 측정에 의한 기계적 성질의 평가방법을 연구하였다. 실험에서는 결합상이 다른 상용 서멧조성의 합금을 분말 야금법에 의해 제조하였다. 소결된 서멧의 자기적 특성은 합금의 조직과 탄소량에 따라 크게 변화하였다. 포화자화(magnetic saturation, $4{\pi}\;{\sigma}$)와 항자력(coercive force, Hc)은 비례하였으며, 고탄소 소결합금에 있어서는 Co-Ni 결합상에서의 W, Mo, Ti등의 용매원자의 농도가 낮아짐에 따라 포화자화는 증가하였다 항자력이 높을수록 경도는 증가하였고, 서멧의 강도 및 인성은 포화자화가 증가할수록 우수하였다. 서멧공구에서 자기적 특성을 측정하여 기계적 성질을 비파괴적으로 평가할 수 있었다.

  • PDF

광 항적경로 모델을 이용한 피하조직에서의 광 특성에 관한 연구 (A Study on Optical Properties in Biological Tissue Using A Photon Path Diffusion Model)

  • 임현수
    • 대한의용생체공학회:의공학회지
    • /
    • 제15권3호
    • /
    • pp.265-274
    • /
    • 1994
  • This paper proposes a method of noninvasive reflectance light to measure the blood fractional volume (Vb) and oxygen saturation ($SO_2$) of biological tissue. We chose the red light of 660nm and infrared light of 880nm. In Vivo reflectance data were obtained by the physiological changes front the surface of the skin over the calf in human subject. The reflected light intensity from different layers within a biological tissue was measured by specially designed reflectometer to apply photon path diffusion model. The collected data represent the changes of blood (ractional volume and oxygen saturation at each reflected light wavelengths. The data evaluation was assessed by examining the slopes of the plotted indices for the changes in oxygen saturation and blood (ractional volume. The results presented in this paper claim that light reflectance can separately discriminate the change of blood volume and that of oxygenation in muscle and also in skin.

  • PDF

Experimental investigation on the variation of thermal conductivity of soils with effective stress, porosity, and water saturation

  • Lee, So-Jung;Kim, Kyoung-Yul;Choi, Jung-Chan;Kwon, Tae-Hyuk
    • Geomechanics and Engineering
    • /
    • 제11권6호
    • /
    • pp.771-785
    • /
    • 2016
  • The thermal conductivity of soils is an important property in energy-related geotechnical structures, such as underground heat pumps and underground electric power cable tunnels. This study explores the effects of geotechnical engineering properties on the thermal conductivity of soils. The thermal conductivities of quartz sands and Korean weathered silty sands were documented via a series of laboratory experiments, and its variations with effective stress, porosity, and water saturation were examined. While thermal conductivity was found to increase with an increase in the effective stress and water saturation and with a decrease in porosity, replacing air by water in pores the most predominantly enhanced the thermal conductivity by almost one order of magnitude. In addition, we have suggested an improved model for thermal conductivity prediction, based on water saturation, dry thermal conductivity, saturated thermal conductivity, and a fitting parameter that represents the curvature of the thermal conductivity-water saturation relation.

경년열화 열처리된 2.25CrMo 강에서의 탄화물 특성 및 자기적 성질의 변화 (Changes of Carbide Characteristics and Magnetic Properties in Artificially Aging Heat Treated 2.25CrMo Steel)

  • 변재원;권숙인
    • 열처리공학회지
    • /
    • 제14권6호
    • /
    • pp.323-329
    • /
    • 2001
  • Artificial aging was performed to simulate the microstructural degradation in 2.25CrMo steel arising from long time exposure at $540^{\circ}C$. The carbide morphologies were classified as acicular, pipe and globular type, and the number of carbides per unit area was measured for each type of carbides. The fine acicular carbides were found to diminish drastically in the initial stage of aging. An attempt was made to evaluate the microstructural degradation in artificially aging heat treated 2.25CrMo steel by the magnetic property measurements such as saturation magnetization, coercivity and remanence. The saturation magnetization showed no distinct trend with aging time. However, the coercivity and remanence were observed to decrease rapidly in initial 920 hours of aging time and then decrease slowly afterwards.

  • PDF

재료의 비선형을 고려한 수직기록장치의 위상최적화 (Topology Optimization of Perpendicular Magnetic Recording System by Considering Magnetic Nonlinearity)

  • 박순옥;유정훈;민승재
    • 대한기계학회논문집A
    • /
    • 제34권7호
    • /
    • pp.821-827
    • /
    • 2010
  • 본 논문은 밀도법을 기반으로 한 자기포화 효과를 고려한 수직자기 기록장치의 위상최적 설계 방법을 제안한다. 자기장 내의 위상최적화 과정에서 자기 저항률의 값은 민감도 해석 결과에 따른 요소의 밀도값 변화에 의거하여 결정된다. B-H 곡선에 따른 자기 저항률의 값은 물성치의 비선형성을 나타낸다. 일반화된 응답 함수의 민감도는 자기장의 비선형 특성을 고려하여 보조 변수법에 의해 표현되고, 설계의 목적 함수는 기록 영역의 자기에너지를 최대화하는 것으로 설정된다. 선형과 비선형의 최적화의 수치 연구의 결과는 비선형의 효과를 나타내고 있다.

로봇 시스템의 신경망 포화 및 퍼지 데드존 보상 (NN Saturation and FL Deadzone Compensation of Robot Systems)

  • 장준오
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2008년도 학술대회 논문집 정보 및 제어부문
    • /
    • pp.187-192
    • /
    • 2008
  • 로봇 시스템의 신경망 포화 및 퍼지 데드존 보상기를 제안한다. 퍼지논리 함수의 분류특성과 신경회로망의 함수 근사화 능력은 포화와 데드존에 의해 유발되는 오자를 제거하기 위한 보상기 설계를 가능케 한다. 포화 및 데드존 보상이 적응적이고 추적오차와 파라미터 추정 치가 유계가 되는 신경망 가중치와 퍼지논리 파라미터 동조알리리듬과 안정도 증명을 제시한다. 신경망 포화 및 퍼지 데드존 보상기를 모의실험으로 포화 및 데드존의 해로운 영향을 줄이는 효과를 보여 준다.

  • PDF

전기장을 받는 강유전체 세라믹내의 균열 해석 (Analysis of a Crack in Ferroelectric Ceramics Subjected to Electric Fields)

  • 범현규;김인옥
    • 한국정밀공학회지
    • /
    • 제20권6호
    • /
    • pp.138-144
    • /
    • 2003
  • A crack in a ferroelectric ceramic subjected to an electric field is analyzed. The boundary of the electrical saturation zone is estimated based on the finite-width saturation zone model, which is analogous to a finite-width Dugdale zone model for mode III. It is shown that the shape and size of the switching zone depends strongly on the boundary of the electrical saturation zone and the ratio of the coercive electric field to the yield electric field. The crack tip stress intensity factor under small scale conditions is evaluated by employing the model of electric nonlinear domain switching. It is found that fracture toughness of the ferroelectric material may be increased or decreased depending on the material property of electrical nonlinearity.