• Investigative Magnetic Resonance Imaging
• /
• v.10 no.2
• /
• pp.98-107
• /
• 2006

Magnetization Transfer (MT) imaging generates contrast dependent on the phenomenon of magnetization exchange between free water proton and restricted proton in macromolecules. In biological materials in knee, MT or cross-relaxation is commonly modeled using two spin pools identified by their different T2 relaxation times. Two models for cross-relaxation emphasize the role of proton chemical exchange between protons of water and exchangeable protons on macromolecules, as well as through dipole-dipole interaction between the water and macromolecule protons. The most essential tool in medical image manipulation is the ability to adjust the contrast and intensity. Thus, it is desirable to adjust the contrast and intensity of an image interactively in the real time. The proton density (PD) and T2-weighted SE MR images allow the depiction of knee structures and can demonstrate defects and gross morphologic changes. The PD- and T2-weighted images also show the cartilage internal pathology due to the more intermediate signal of the knee joint in these sequences. Suppression of fat extends the dynamic range of tissue contrast, removes chemical shift artifacts, and decreases motion-related ghost artifacts. Like fat saturation, phase sensitive methods are also based on the difference in precession frequencies of water and fat. In this study, phase sensitive methods look at the phase difference that is accumulated in time as a result of Larmor frequency differences rather than using this difference directly. Although how MT work was given with clinical evidence that leads to quantitative model for MT in tissues, the mathematical formalism used to describe the MT effect applies to explaining to evaluate knee disorder, such as anterior cruciate ligament (ACL) tear and meniscal tear. Calculation of the effect of the effect of the MT saturation is given in the magnetization transfer ratio (MTR) which is a quantitative measure of the relative decrease in signal intensity due to the MT pulse.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.47 no.6
• /
• pp.107-116
• /
• 2010

Smear is a phenomenon that occurs when an extremely strong light source appears in the imaging system with CCD sensor. It occurs due to the signal charge transfer of CCD and appears as bright lines of noise emanating vertically (or horizontally) from the light source. For still images, smear can be reduced by using a mechanical shutter or special drive methods, but these techniques cannot be applied to image sequences. In this paper, we propose a smear removal method that can be applied to imaging systems for not only still images but also image sequences. The proposed method uses the optical black region(OBR) which is a group of pixels located in the boundary of CCD imaging sensors. Although the OBR is not exposed to light, it contains smear information caused by the charge transport. First, noise and the smear signal in the OBR is separated, and noise is removed to correctly estimate smear effect. Then, corrected OBR signal is uniformly subtracted to eliminate smear effect. Also, if saturation is occurred, the current pixel is substituted by weighted summation of neighboring pixels to improve the visual degradation. Experimental results show that the proposed algorithm outperforms the conventional methods.

• Fire Science and Engineering
• /
• v.15 no.1
• /
• pp.84-92
• /
• 2001

In today's world, rise in the establishment of social infrastructure resulting from population saturation in large cities has led to more extensive and frequent use of chemical materials on facilities. A result, unexpected and serious accidents, hazards, contingencies and disasters are more prevalent than ever. Such phenomenon calls for more devoted and concerted efforts towards finding ways to reduce the safety hazards that are seen to take place more often than before with the increase in the number of facilities that are prone to bring disaster and hazard coupled with the conventional safety problems that continue to exist even today. In developed countries, such challenge is addressed by various appropriate countermeasures drawn up by local professional committees on industrial facilities, whose members conduct offsite and onsite evaluation un the potential industrial disasters and its seriousness and provide their advice thereof. Against this backdrop, this study aims at identifying a comprehensive safety allowance level (safety acceptable level) when imposing limitation on the development of conventional or new facilities, for the fur pose of establishing a safety allowance level of disastrous and dangerous facilities in Korea. This is done by assessing and applying the level of danger each individual is exposed to in a randomly selected region (disastrous and dangerous areas in Seoul) based on probability of quantitative hazards, as well as simulation and calculation methods which include: i) social disaster evaluation method applying Quantified Risk Assessment of Health & Safety Executive of UK and Matrix of Risk of Evaluated Sources of Hazard; ii) Fault Tree or Event Tree Analysis and etc.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.49 no.1
• /
• pp.88-96
• /
• 2012

According to development of technology for media, observers try to watch the realities from images, as follows, 3D imaging has been extremely developed. 3D image gives depth in the image, observers feel in nature. Different image perception from left and right eyes make the 3D image. Anaglyph which is one of the ways to make an image of three dimensions is for obtaining an image of three dimensions by using color filter glasses. Anaglyph has a little amount of calculation and is easy to make, and it has a good point that anaglyph can be used in more wide field because it can create an image of three dimensions to the output of print like printed matter. However, the phenomenon of retinal rivalry can cause a feeling of fatigue because a difference of brightness of the left image and the right image happen. The way to reduce this problem is made by cutting down a difference of brightness. In the result, retinal rivalry can be reduced. We reduced a difference of the brightness of the left and the right image by utilizing the brightness and average of the original image to reduce retinal rivalry and we made better colors of anaglyph by using the way that we keep the hue caused by a change of brightness and supplement saturation about color distortion which is created at that time.

• Journal of the Korean Geotechnical Society
• /
• v.30 no.3
• /
• pp.47-58
• /
• 2014

To investigate the unsaturated characteristics of the tailings obtained from the waste dump at Imgi mine, matric suction and volumetric water content were measured in both drying and wetting processes using Automated Soil-Water Characteristics Curve Apparatus. Based on the measured result, Soil Water Characteristic Curves (SWCC) were estimated by van Genuchten model. According to the unsaturated soil classification method, the tailings of the waste dump correspond to clayey sand. As a result of Suction Stress Characteristic Curve (SSCC) by Lu and Likos model, SSCC has a shape of S which is similar to SWCC. The hysteresis phenomenon occurred in SSCCs, which means the suction stress of drying path is larger than that of wetting path in the same effective degree of saturation. The effective stress of unsaturated soil is equal to that of saturated soil when matric suction is less than Air Entry Value (AEV). However, the effective stress of unsaturated soil is larger than that of saturated soil when matic suction is more than AEV. Meanwhile, unsaturated hydraulic conductivity by van Genuchten model decreased with increasing matric suction, and the hydraulic conductivity of drying path is larger than that of wetting path.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.27 no.11
• /
• pp.119-125
• /
• 1990

This paper describes fiber optic voltage sensor using EOM-BSO (Electro-Optic Modulator-Bismuth Silicon Oxcide). Transceiver has an electical/optical converter and an optical/electrical converter which consist of light emitting diode, PIN-PD, and electronic circuits. Multimode fiber cable of $100/140{\mu}m$ core/clad diameter is used for connecting the transceiver to fiber cable and fiber optic voltage sensor. Before our experiments, by applying the Maxwell equations and wave equations, We derive matrix equation on wave propagation in the BSO single crystal. And also we derive optimal equation on intensity modulation arising through an analyzer. According to experi-mental results, fiber optic voltage sensor has maximum $2.5{\%}$ error within the applied AC voltage of 800V. As the applied voltage increases, saturation values of voltage sensor also increase. This phenomenon is caused by optical rotatory power of BSO single crystal. And temperature dependence of sensitivity for fiber optical rotatory power of BSO single crystal. And temperature dependence of sensitivity for fiber optic voltage sensor in the temperature range from$-20^{\circ}C\to\60^{\circ}C$ are measured within ${\pm}0.6{\%}$. And frequency characteristics of the voltage sensor has good frequency characteristics from DC to 100kHz.

• Research in Community and Public Health Nursing
• /
• v.6 no.2
• /
• pp.173-182
• /
• 1995

Primary health care(PHC) has been established since A Health Law for rural residents has been legislated in 1980 following the WHO declaration, 'Health for All 2000'. in 1978. PHC services are presently assumed to be provided by 2038 Community Health Practitioners(CHP) to about 28% out of rural population in Korea. Most CHPs have confronted the adaptation process to the community being practiced although a CHP's role is to evoke community participation for the improvement of their health by themselves. So the purpose of this study is to describe and explain of the commitment of CHPs into the community. Data were collected by direct interview and tape-recording under subjects' permission till theoretical saturation were occured from 6 CHPs. The subjects were 41 years old and have served in the community for 9 years in average. Main questions and concepts were explored from data according to the procedure of the grounded theory methodology. The results are as follows. 1) The number of the main concepts were twenty four that identified Motive, Desire, Personal characteristics, Unfamiliarity, Denial, Feeling of isolation, Self-sacrifice, Kindness, Patience, Assimilation, Respect for the residents, Support by the family, Support by the residents, Achievement, Acceptance of realities, Use of resources, Inducement of cooperation from the residents, Changes of the difference from time orientation between CHP and residents, Attitude as a official, Technical support, Cost management, Satisfaction level, Acknowledgement by the residents and discrepancy. 2) The twenty four concepts were categorized to seven groups such as Motivation, Feeling of Heterogeneity, Self-discipline, Social support, Induced changes in the attitudes of residents, Familarity and Persistent discrepancy. 3) The categorized groups were analyzed on the base of the Causal Conditions, Central Phenomena, Contexts, Intervening Conditions, Action / Interaction Strategies, and Consequences. Central phenomenon in this study was identified to be the feeling of heterogeneity. Community health practitioners experienced unfamiliarity and denial from the community and felt themselves isolated in the first. In time, they won the trust of residents by their efforts including self-sacrifice, kindness, patience, and assimilation. Afterward, practitioners got self-confidence and familiarity with lesser feeling of heterogeneity. Nevertheless, practitioners could not commit themselves completely because of the persistent discrepancy between CHP and residents. 4) On the commitment process, the CHPs' feeling of heterogeneity were decresed and social support increesed and newly evolved induced change of residents through the continuous interaction between CHP and them The contribution of this study would be concluded as follows. 1) It is expected that effective strategies for more rapid committment into the community can be developed based on this study. 2) More easy committment would be possible for the newly appointed CHP through understanding of the committment process identified on this study.

• The Journal of Engineering Geology
• /
• v.27 no.2
• /
• pp.125-132
• /
• 2017

Approximately 64 percent of Korean territory is covered with mountains, and there is occurred a continuous mountain disaster such as landslide, debris flow and slope failure around mountain slopes due to heavy rainfall and typhoon in the summer season. Even in such a reality, the development of mountain areas is being carried out through the development and expansion of social infrastructures centered on mountain areas, but systematic management is insufficient. Constructions of a forest road facility for mountain slopes can be a cause of mountain disasters intensively in the summer season due to artificially changing the mountain area. In this unstable mountain environment, efforts to build a disaster-resistant environment are urgently needed. This research is to analyze the stability of mountain slopes according to soil depth (1~5 m) and mountain slope ($20{\sim}60^{\circ}$) considering the characteristics of rainfall infiltration under extreme rainfall conditions. As a result, the stability of the mountain slope was found to be different according to the depth of soils and the saturation area of the soil layer. As well as the stability of the mountain area was found to be lower than that of the natural mountain area. Specially, rainfall infiltration occurs at the upper slope of the forest road. For this reason, the runoff phenomenon of rainfall infiltration water occurs clearly when the depth of soil layer is low.

• Journal of Korean Elementary Science Education
• /
• v.41 no.1
• /
• pp.44-64
• /
• 2022

This study explored the elementary school teachers' experiences while teaching students with low achievement in science based on the grounded theory. In-depth interviews and analysis were conducted on 13 teachers with experiences in teaching students with low achievement in science within the last three years and more than five years of field experience until the theoretical saturation of data on the teaching experiences for students with low achievement in science. The analysis results were as follows. First, the teaching experiences of elementary school teachers for underachievers in science were classified into 119 concepts, 41 subcategories, and 17 categories. Based on the paradigm model, the categories were structured and presented as causal conditions, contextual conditions, intervening conditions, action/interaction strategies and consequences based on the central phenomenon of 'difficulty in teaching students with low achievement in science'. Second, the core category of elementary school teachers' teaching underachievers in science was assumed to be 'overcoming difficulties and teaching underachievers in science'. And according to the properties and dimensions of the core category, teachers who teaching students with low achievement in science were divided into four types: 'compromising-', 'overcoming-', 'accepting-', and 'conflicting-reality type'. Third, a conditional matrix was presented to summarize and integrate the results of this study by classifying the teaching experience of elementary school teachers for underachievers in science into educational providers and educational demanders. On the basis of these findings, educational implications for teaching students with low achievement in science were discussed.

• Journal of Service Research and Studies
• /
• v.12 no.4
• /
• pp.94-105
• /
• 2022

Urban Air Transportation (UAM) is a three-dimensional transport within the city using eVTOL as an alternative to the saturation of land transportation due to overcrowding in major cities around the world. Design has played its roles in various fields in the development of transport, but research on the design application of UAM, which will be commercialized soon, is insufficient. Accordingly, there is a growing need for prior research on the forecasting the future environment and the design application through phenomenon analysis. The purpose of this study is to derive mega trends through STEP analysis for UAM and present ways to apply design in the UAM field based on this. The research method was conducted in the following order. First, the theoretical background of UAM was established by analyzing prior art documents on UAM. Second, five trends in the future environment centered on UAM were derived through STEP analysis. Finally, in order to derive a design application, five experts in each design area (product, visual, video, environment, service) discussed the design application focusing on the results of STEP analysis and derived a design application plan for each design area in the UAM field. Through this study, it was found that the most frequent design area in the STEEP analysis is product design and service design, and therefore related design development is important. After analyzing UAM's information provision plan, display method, and usage process suggested in this study, it is expected that it will lead to various prior design studies related to UAM, such as customized service design, to establish an infrastructure environment for commercialization of UAM.