• 설비공학논문집
• /
• 제10권5호
• /
• pp.550-557
• /
• 1998

The saturated vapor density correlation proposed here relates logarithmic density to the inverse of temperature. Its performance is examined correlating the date listed in the ASHTAE tables for 40 refrigerants. The correlation equation is valid over the entire range where data point exist and gives better results than a conventional equation with the same number of adjustable coefficients. Number of terms in the equation is a variable so that great flexibility can be given to the representation of data.

• 설비공학논문집
• /
• 제19권6호
• /
• pp.457-463
• /
• 2007

Various correlations of saturated vapor density in a truncated power series form are tested and compared in this study. Saturated vapor density correlation can be expressed relating logarithmic reduced density to the reduced temperature. Five types of correlation has been investigated using saturated vapor density data for 22 pure substance refrigerants from ASHRAE (American Society of Heating, Reftigerating and Air-Conditioning Engineers, Inc.) property tables and NIST (National Institute of Standards and Technology) Chemistry Webbook. Correlations are fitted to the data points by least squares method. Data points are equally weighted. The best type of correlation among the five types is suggested. The results obtained indicate that the best correlations with 3, 4, and 5 terms yield average AAD's (Average Absolute Deviation) of 0.27%, 0.04%, and 0.02%, respectively, while widely used conventional correlations with 3, 4, and 5 terms yield those of 1.19%, 0.61%, and 0.17%. The suggested type of correlation could reduce the number of terms while improving performance.

• 설비공학논문집
• /
• 제3권4호
• /
• pp.286-296
• /
• 1991

The thermodynamic properties of R134a, the prospective R12 alternative, have been computerized using Martin-Hou equation of state and the coefficients given by Willson-Basu. Several experimental results in literatures for PVT data, saturated vapor pressure, saturated liquid density are compared with the calculated results to investigate the accuracy. The average deviation (max. deviation) is 0.13% (0.25%) for saturated liquid density, 0.25% (0.8%) for PVT data. Thermodynamic properties, enthalpy, entropy are compared with the NIST's. The maximum percent difference is 3% for saturated liquid enthalpy, 1.5% for saturated vapor enthalpy, 4% saturated liquid entropy, and 0.7% for saturated vapor entropy. Correction of W-B's coefficients and inclusion of the sixth term of M-H EOS for improvement of accuracy are recommended. R134a and R12 are compared with respect to refrigeration performance. COP's are different from each other within 3%. Refrigeration effect of R134a is superior to that of R12 but refrigeration capacity of R134a is inferior to that of R12 because the volumetric efficiency of the system using R134a is lower than that of the system using R12.

• 한국분무공학회지
• /
• 제5권1호
• /
• pp.30-40
• /
• 2000

The characteristics of liquefied butane spray are expected to be different from conventional diesel fuel spray, because a kind of flash boiling spray is expected when the back pressure is below the saturated vapor pressure of the butane(0.23MPa at 298K). The ambient pressure was held at a pressure above(0.37MPa) and below(0.15MPa) the fuel vapor pressure. The axial velocities, radial velocities, and size distributions in butane sprays were measured with PDPA(Phase Doppler Particle Analyzer) system. The PDPA measurement showed a smaller SMD at the 0.15MPa chamber pressure, compared to the 0.37MPa case. Log-hyperbolic density function for the droplets size distribution can be fitted to the experimental results of a liquefied butane spray.

• 한국세라믹학회지
• /
• 제39권6호
• /
• pp.528-534
• /
• 2002

CaO ceramics were prepared by conventional sintering process and their hydration behaviors were evaluated by measuring weight increment on saturated water vapor pressure at ambient temperature. CaCO$_3$ and limestone were used as CaO source materials and $Al_2$O$_3$, MgO and SiO$_2$ were added as sintering agents. $Al_2$O$_3$ was a liquid phase sintering agent to increase densification and grain growth rates, whereas MgO and SiO$_2$, densification and grain growth inhibitors. Regardless of composition, all of the prepared CaO ceramics showed the improved hydration resistance as bulk density increased. Especially, when bulk density was more than 3.0 g/㎤, there was no weight increment after 120 h of hydration. Therefore, to decrease contact area between CaO and water vapor by increasing bulk density with the $Al_2$O$_3$ sintering additive was effective for the improvement of CaO hydration resistance.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제2권3호
• /
• pp.205-212
• /
• 2002

The growth characteristics of metal-organic chemical vapor deposition (MOCVD) $Pb(Zr_xTi_{1-x})O_3 (PZT) thin films were investigated for the application of high-density ferroelectric random access memories (FRAM) devices beyond 64Mbit density. The supply control of Pb precursor plays the most critical role in order to achieve a reliable process for PZT thin film deposition. We have monitored the changes in the microstructure and electrical properties of films on increasing the Pb precursor supply into the reaction chamber. Under optimized conditions, $Ir/IrO_2/PZT(100nm)/Ir capacitor shows well-saturated hysteresis loops with a remanent polarization (Pr) of $~28{\mu}C/textrm{cm}^2$ and coercive voltage of 0.8V at 2.5V. Other issues such as step coverage, compositional uniformity and low temperature deposition was discussed in viewpoint of actual device application.

• 한국전기전자재료학회논문지
• /
• 제25권11호
• /
• pp.922-925
• /
• 2012

Single crystalline Au nanowires were successfully synthesized in a tube-type furnace. The Au nanowires were grown by vapor phase synthesis technique using solid-liquid-solid (SLS) mechanism on substrates of corning glass and Si wafer. Prior to Au nanowire synthesis, Au thin film served as both catalyst and source for Au nanowire was prepared by sputtering process. Average length of the grown Au nanowires was approximately 1 ${\mu}m$ on both the corning glass and Si wafer substrates, while the diameter and the density of which were dependent on the thickness of the Au thin film. To induce a super-saturated states for the Au particle catalyst and Au molecules during the Au nanowire synthesis, thickness of the Au catalyst thin film was fixed to 10 nm or 20 nm. Additionally, synthesis of the Au nanowires was carried out without introducing carrier gas in the tube furnace, and synthesis temperature was varied to investigate the temperature effect on the resulting Au nanowire characteristics.

• 한국농림기상학회지
• /
• 제22권4호
• /
• pp.299-311
• /
• 2020

농산촌 지역 단일 집수역인 전남 구례군 간전면 중대리계곡과 경남 하동 악양면에서 각각 6지점과 14지점의 기상관측자료를 수집하여 복잡지형에서의 수증기압 및 상대습도 분포를 분석하였다. 중대리계곡에서는 2014년 12월 19일부터 2015년 11월 23일까지, 악양계곡에서는 2012년 8월 15일부터 2013년 8월 18일까지 가장 고밀도로 측정한 시기의 매시 기온과 습도(지면 위 1.5m)를 이용, 농업기상재해 조기경보시스템에서 사용되고 있는 기존의 수증기압 추정방식과 실제 수증기압을 비교하였다. 관측한 수증기압의 해발고도에 따른 기울기는 시간대(0300, 0600, … 2400 LST)에 따라 변동되었고, 야간일수록 위 아래의 수증기압차가 증대되었다. 지형·지표 조건이 다양한 악양계곡 관측 지점에서는 해발고도 외의 요인으로 인한 수증기압 변이가 지점별로 시간대에 따라 다르게 나타났다. 실제에 더 가까운 수증기압 및 상대습도 추정을 위해, 연구 대상지역의 관측자료로 해발고도 편차 당 수증기압 변화를 조정하는 계수를 도출하였다. 상대습도는 포화수증기압 대비 추정된 수증기압으로 모의하였으며, 조기경보시스템에서 사용된 기존 방법보다 도출된 계수를 활용한 추정방식에서 오차가 더 개선되었음을 확인하였다.

• Tribology and Lubricants
• /
• 제34권5호
• /
• pp.175-182
• /
• 2018

Accumulation of coal ash at the boiler wall reduces combustion and fuel efficiency. The design of a wall blower is important to effectively remove coal ash. We present numerical results for the removal of coal ash from boiler walls of domestic coal-fired power plants, associated with the computational fluid dynamics for the flow from spray nozzle to boiler wall. The numerical model simulates an erosion process in which the multiphase fluid comprising saturated vapor and fluid water is sprayed from the nozzle, and the water particles impact the boiler wall. We adopt the Finnie erosion model for water particles. We obtain the erosion rate density as a function of nozzle angle and its injection angle. As excessive coal ash removal usually induces damage to the boiler wall, the removal operation typically focuses on a large area with uniform depth rather than the maximum removal of coal ash at a specific location. In order to estimate the removal performance of the wall blower nozzle considering several functionality and reliability factors, we evaluate the optimal injection and nozzle angles with respect to the biggest cumulative and highest erosion rates, as well as the widest range and lowest standard deviation of the erosion rate distribution.

• Journal of Forest and Environmental Science
• /
• 제21권1호
• /
• pp.92-97
• /
• 2005

1. 상엽의 기공증산속도는 광도가 증가함에 따라 계속적인 증가를 나타냈지만, 중엽과 하엽은 광도 약 $100{\mu}mol\;m^{-2}S^{-1}$ 이상에서 기공증산의 포화가 나타났다. 포화광도 $1,200{\mu}mol\;m^{-2}S^{-1}$)에서 기공증산은 상엽($1.29mmol\;H_2O\;m^{-2}S^{-1}$) > 중엽($0.56mmol\;H_2O\;m^{-2}S^{-1}$) > 하엽($0.31mmol\;H_2O\;m^{-2}S^{-1}$)순위였다. 2. 엽의 수분이용효율은 광도 $600{\mu}mol\;m^{-2}S^{-1}$ 까지 빠르게 증가하다가 그 이상의 광도에서는 감소한 반면, 중엽과 하엽은 광도 $400{\mu}mol\;m^{-2}S^{-1}$ 까지는 증가하였지만 그 이상의 광도에서는 증가를 보이지 않았다. 3. 엽의 광도증가에 따른 수증기압결핍은 직선적으로 감소하는 경향을 나타냈다.