• 한국전기전자재료학회논문지
• /
• 제25권11호
• /
• pp.922-925
• /
• 2012

Single crystalline Au nanowires were successfully synthesized in a tube-type furnace. The Au nanowires were grown by vapor phase synthesis technique using solid-liquid-solid (SLS) mechanism on substrates of corning glass and Si wafer. Prior to Au nanowire synthesis, Au thin film served as both catalyst and source for Au nanowire was prepared by sputtering process. Average length of the grown Au nanowires was approximately 1 ${\mu}m$ on both the corning glass and Si wafer substrates, while the diameter and the density of which were dependent on the thickness of the Au thin film. To induce a super-saturated states for the Au particle catalyst and Au molecules during the Au nanowire synthesis, thickness of the Au catalyst thin film was fixed to 10 nm or 20 nm. Additionally, synthesis of the Au nanowires was carried out without introducing carrier gas in the tube furnace, and synthesis temperature was varied to investigate the temperature effect on the resulting Au nanowire characteristics.

• 전기학회논문지
• /
• 제56권12호
• /
• pp.2122-2126
• /
• 2007

A special PM-Tube(Photo Multiplier Tube) that is using the photoelectric effect has been designed and manufactured to measure the radiation energy of arc in a gas circuit breaker(GCB). The PM-Tube, LLG(liquid light guides), ND(neutral density) filter, and a model gas circuit breaker have been combined for the reception and the transmission of the light and a simplified synthetic test facility with the arc energy measuring system has been established. In the case of $SF_6$ gas pressure $5kg.f/cm^2$ and arc length 20mm, the radiation energy increases with the arc current but it tend to be saturated in the above 20kA. Under the arc current 20kA, the total radiation energy has the biggest value around 8kA and was not exceeded 40% of the total arc energy.

• 한국분말재료학회지
• /
• 제1권2호
• /
• pp.159-166
• /
• 1994

The variation of the microstructures and the mechanical properties with varying vacuum hot pressing temperature and pressure was investigated in PyM processed 20 vol%) SiCw/ 2124Al composites. As increasing the vacuum hot pressing temperature, the aspect ratio of whiskers and density of composites increased due to the softening of 2124Al matrix with the increased amount of liquid phase. The tensile strength of composite increased with increasing vacuum hot pressing temperature up to $570^{\circ}C$ and became saturated above $570^{\circ}C$, To attain the high densification of composites above 99%, the vacuum hot pressing pressure was needed to be above 70 MPa. However, the higher vacuum hot pressing pressure above 70 MPa was not effective to increase the tensile strength due to the reduced aspect ratio of SiC whiskers from damage of whiskers during vacuum hot pressing. A phenomenological equation to predict the tensile strength of $SiC_w$/2124AI composite was proposed as a function including two microstructural parameters, i.e. density of composites and aspect ratio of whiskers. The tensile strength of $SiC_w$/2124AI were found more sensitive to the porosity than other P/M materials due to the higher stress concentration and reduced load transfer efficiency by the pores locating at whisker/matrix interfaces.

• Korean Chemical Engineering Research
• /
• 제61권4호
• /
• pp.550-554
• /
• 2023

탄화수소기반의 화석연료 에너지원은 이산화탄소 배출로 인한 지구온난화 문제로 지속적인 이용 및 확장에 제한이 있다. 수소는 전통적인 화석연료에 대한 유망한 대안으로 여겨지고 있다. 수소의 안정적인 장기저장을 위해서 극저온인 포화상태에서 수소의 열역학적 물성에 대한 예측이 요구된다. 따라서 본 연구에서는 비교적 간단한 관계식을 보이는 3차 상태방정식들을 이용하여 포화상태의 열역학적 물성들(포화증기압, 액체 및 기체의 밀도, 엔탈피 및 엔트로피)을 모사하였다. 포화상태 수소에 대한 여러가지 열역학적 물성들을 비교한 결과 3 종류(Redlich-Kwong (RK), Soave-Redlich-Kwong (SRK), Peng-Robinson (PR))의 상태방정식 중 SRK 모델이 비교적 정확한 예측결과를 보였다.

• 지구물리와물리탐사
• /
• 제9권1호
• /
• pp.60-66
• /
• 2006

세 개의 서로 다른 사암 샘플들 -두 개의 합성 샘플과 한 개의 현장 샘플- 에 대해 현장 저류층의 대표적인 구속압력과 공극압력하에서 초음파 시험이 수행되었다. 세가지 사암 샘플들은 (a) 캘사이트 시멘트(calcite intergranula. cement (CIPS))로 만든 합성사암, (b) 실리카 시멘트(silica intergranular cement)로 만든 합성 사암 (c) Otway Basin 의 Boggy Creek 1 시추공에서 시도되는 $CO_2$ 파일럿 프로젝트의 대상 암석층 중 Waarre 층으로부터 추출한 코아 샘플로 구성되어 있다. 공극률은 각각 32%, 33%, 26%이다. 초기시험은 실내건조(room-dried) 상태에 있는 코아들에 대해 구속응력을 5 MPa 씩 단계별로 65 MPa 까지 증가시키며 이루어졌다. 그리고 나서 모든 코아들에 처음에는 온도 $22^{\circ}C$에서 6 MPa 공극압력으로 기체상의 $CO_2$를, 그 다음에는 온도 $22^{\circ}C$ 에서 7 MPa 부터 17 MPa 까지 5 MPa 씩 증가시키면서 액체상의 $CO_2$를 주입하였다. 구속응력은 10MPa부터 65 MPa까지 달리 하였다. P와 S 초음파 파형들이 유효응력이 증가할 때마다 기록되었다. 속도-유효응력 반응들이 P 파와 S 파에 대해 실험 자료들로부터 계산되었으며, 감쇠(1/Qp)들은 스펙트럼 비 방법을 이용하여 파형들로부터 계산되었다. 각각의 사암들에 대한 이론적인 속도-유효응력 계산은 $CO_2$ 압력-밀도 와 $CO_2$ 체적계수-압력 상 다이어그램(phasediagram), Gassmann 유효 매질 이론(effective medium theory)을 이용하여 구하였다. 기체상의 $CO_2$ 주입은 속도-유효응력에서 건조상태(공기로 포화된 상태)에 비해 거의 무시할만한 변화를 가져왔다. 다양한 공극압력에서 액체상의 $CO_2$ 주입은 공기로 포화된 상태에 비해 속도-유효응력 반응을 평균 약 8% 정도 낮게 한다. 실험자료들은 높은 유효응력에서 Gassmann 계산들과 일치한다. 이러한 이론과 일치하는 "임계" 유효응력은 사암의 종류에 따라 달라진다. 이 차이는 각각의 사암 종류의 미세구조에서 미세 균열 수의 차이에 기인한 것이라 생각된다. 높은 유효응력에서의 이론과 의미있게 일치하였으며, $CO_2$ 주입 시 현장에서의 탄성파 거동을 예상하는데 있어서 어느 정도 확신을 준다.

• 한국유기농업학회지
• /
• 제28권4호
• /
• pp.579-589
• /
• 2020

고추역병 다발생 포장에서 녹비작물인 호밀재배에 따른 토양환경 변화와 고추역병 경감 효과를 조사하였다. 토양 물리성을 분석한 결과에서는 호밀재배에서 용적밀도와 공극률이 증가하였다. 또한, 토양 삼상의 분포는 고상에서는 관행재배와 차이가 없었으나, 기상은 관행재배 보다 증가하고 액상은 감소하였다. 토양 내 인지질 지방산을 추출하여 지표 지방산으로 분석한 미생물 군락의 상대밀도는 호밀재배에서 유의성 있게 증가하였으며, 호기성균/혐기성균의 비율의 비율도 호밀재배에서 높게 나타났다. 환경스트레스 지표인 포화지방산/불포화지방산 비율과 cyclo-지방산/전구체 비율은 호밀재배가 관행재배 보다 낮아 토양환경이 개선 된 것으로 나타났다. 호밀재배에 따른 고추역병의 경감효과를 조사한 결과 호밀재배가 관행재배 보다 30.7% 낮은 발병률을 나타냈다. 이상의 결과를 요약해볼 때, 고추역병 다발생 포장에서 녹비작물인 호밀재배는 토양환경을 개선하고 고추역병 발병을 감소시킬 것으로 사료된다.

• Nutrition Research and Practice
• /
• 제8권3호
• /
• pp.336-341
• /
• 2014

BACKGROUND/OBJECTIVE: It is expected that dairy products such as cheeses, which are the main source of cholesterol and saturated fat, may lead to the development or increase the risk of cardiovascular and metabolic diseases; however, the results of different studies are inconsistent. This study was conducted to assess the association between cheese consumption and cardiovascular risk factors in an Iranian adult population. SUBJECTS/METHODS: Information from the Isfahan Healthy Heart Program (IHHP) was used for this cross-sectional study with a total of 1,752 participants (782 men and 970 women). Weight, height, waist and hip circumference measurement, as well as fasting blood samples were gathered and biochemical assessments were done. To evaluate the dietary intakes of participants a validated food frequency questionnaire, consists of 49 items, was completed by expert technicians. Consumption of cheese was classified as less than 7 times per week and 7-14 times per week. RESULTS: Higher consumption of cheese was associated with higher C-Reactive Protein (CRP), apolipoprotein A and high density lipoprotein cholesterol (HDL-C) level but not with fasting blood sugar (FBS), total cholesterol, low density lipoprotein cholesterol (LDL-C), triglyceride (TG) and apolipoprotein B. Higher consumption of cheese was positively associated with consumption of liquid and solid oil, grain, pulses, fruit, vegetable, meat and dairy, and negatively associated with Global Dietary Index. After control for other potential confounders the association between cheese intake and metabolic syndrome (OR: 0.81; 96%CI: 0.71-0.94), low HDL-C level (OR: 0.87; 96%CI: 0.79-0.96) and dyslipidemia (OR: 0.88; 96%CI: 0.79-0.98) became negatively significant. CONCLUSION: This study found an inverse association between the frequency of cheese intake and cardiovascular risk factors; however, further prospective studies are required to confirm the present results and to illustrate its mechanisms.

• Animal Bioscience
• /
• 제34권7호
• /
• pp.1193-1201
• /
• 2021

Objective: According to market demand, meat duck breeding mainly includes 2 breeding directions: lean Pekin duck (LPD) and fat Pekin duck (FPD). The aim of the present study was to compare carcass and meat quality traits between 2 strains, and to provide basic data for guidelines of processing and meat quality improvement. Methods: A total of 62 female Pekin ducks (32 LPDs and 30 FPDs) were slaughtered at the age of 42 days. The live body weight and carcass traits were measured and calculated. Physical properties of breast muscle were determined by texture analyzer and muscle fibers were measured by paraffin sections. The content of inosine monophosphate (IMP), intramuscular fat (IMF) and fatty acids composition were measured by high-performance liquid chromatography, Soxhlet extraction method and automated gas chromatography respectively. Results: The results showed that the bodyweight of LPDs was higher than that of FPDs. FPDs were significantly higher than LPDs in subcutaneous fat thickness, subcutaneous fat weight, subcutaneous fat percentage, abdominal fat percentage and abdominal fat shear force (p<0.01). LPDs were significantly higher than FPDs in breast muscle thickness, breast muscle weight, breast muscle rate and breast muscle shear force (p<0.01). The muscle fiber average area and fiber diameter of LPDs were significantly higher than those of FPDs (p<0.01). The muscle fiber density of LPDs was significantly lower than that of FPDs (p<0.01). The IMF of LPDs in the breast muscle was significantly higher than that in the FPDs (p<0.01). There was no significant difference between the 2 strains in IMP content (p>0.05). The polyunsaturated fatty acid content of LPDs was significantly higher than that of FPDs (p<0.01), and FPDs had higher saturated fatty acid and monounsaturated fatty acid levels (p<0.05). Conclusion: Long-term breeding work resulted in vast differences between the two strains Pekin ducks. This study provides a reference for differences between LPD and FPD that manifest as a result of long-term selection.