• Journal of the Korean Home Economics Association
• /
• v.27 no.1
• /
• pp.1-8
• /
• 1989

In order to investigate the mechanical properties such as tensile, bending, shearing, thickness and weight of the wool fabrics were measured by KES-F system. Samples were classified into blend ratio, weave type, fabric count. Blend ratio was classified into two groups, which are P/W blended fabric (p=63~65%, w=35~37%) and all wool fabric. Weave type was classified into four groups, which are plain, 3 harness twill, 4harness twill, satin. Cloth count was classified into three groups, which are loose, medium, tight. Statistical analysis was performed using T-test, F-test. The results were as follows; 1. There was significant difference in the thickness, tensile, bending, shearing according to the blend ratio. 2. According the weave, there was significant difference in the bending, weight and thickness in the P/W blended fabrics. There was significant difference in the tensile, weight, thickness, bending, shearing, shearing hysterisis (2HG) in the all wool fabrics. 3. There was significant difference in the shearing properties according to the fabric count.

• Journal of the Korean Home Economics Association
• /
• v.11 no.1
• /
• pp.26-43
• /
• 1973

This study was carried out on the Sewbility of Urethane Foam usually used as coldproof lining. The Sewability was estimated with the Puckering Grade and Seam Efficiency according to the thicknes of urethane foam, fineness and material of sewing thread, and the sort of covering fabric. The result shows the following ; 1. The thick foam proportinally shows the low Puckering Grade. 2. Effect on the sewability is small in fineness of sewing thread but large in material. Especially silk thread shows the greatest sewability in foam sewing. When the material of covering fabric is same as that of sewing thread (for example ; p/c fabric and p/c thread) the sewability is excellent in special. 3. Taffeta in covering foam is not suitable to foam sewing, satin and twill show superior sewability without reagrd to the thickness of foam. 4. In case of sewing foam covered with tricot, optimum thickness of foam and fineness of sewing thread through pretest must determine. 5. The thicker foam is the better seam efficiency tends, and Seam Efficiency largely effects to the strength of the sewing thread itself. 6. The seam Efficiency can heighten with the strength of sewing thread in proportion to that of covering fabric.

• Journal of the Korean Home Economics Association
• /
• v.35 no.2
• /
• pp.111-122
• /
• 1997

This thesis researched for the conservation of a suit of armor, one glove, one belt, and on knife case that General Jung, Gong-chung had been worn in the early 17 th centuries. The armor was Doojung-kab for the battle. It was made of two kinds of fabrics, one of them was silk satin's outer fabrics, the other was quilt4d cotton's lining. as the armor was made of silk and cotton, it was treated by dry solvents and dry soap. In the dry cleaning method, used solvents were n-hexane, cyclohexane, benzene, and n-decane. the volume ratio of dry soap was 120: 1. The reaction temperature was 30℃, and reaction time was 10 to 30 minutes per one turn. The glove, belt and knife case were made with leather. They were dipped on the polyethyleneglycol 150 saturated solution during 24hours at 50℃ and then dried naturally. They were washed by toluene to remove the untreated pp.E.G. on the surfaces. It was sterilized by two gases of methylenebromide and ethyleneoxied. For the conservation, it was packed thoroughly by ？ polyethylene film sheet without air.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.19 no.8
• /
• pp.1915-1926
• /
• 1995

The Fatigue characteristics of 8-harness satin woven CFRP composites with a circular hole are experimentally investigated under constant amplitude tension-tension loading. It is found in this study that the fatigue damage accumulation behavior is very random and history-independent, and the fatigue cumulative damage is linearly related with the mean number of cycles to a specified damage state. From these results, it is known that the fatigue characteristics of CFRP composites satisfy the basic assumptions of Markov chain theory and the parameter of Markov chain model can be determined only by mean and variance of fatigue lives. The predicted distribution of the fatigue cumulative damage using Markov chain model shows a good agreement with the test results. For the fatigue life distribution, Markov chain model makes similar accuracy to 2-parameter Weibull distribution function.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.22 no.7
• /
• pp.816-825
• /
• 1998

This study surveys the thermal property and air permeability to the weight reduction rate of PET fabrics. For this purpose, 12 kinds of satin and 18 kinds of plain weave fabrics are prepared with change of the physical properties such as weft yarn count, t.p.m. and density. The weight reduction rate was 0%, 12%, 25% and 30%. The warm/cool feeling(Qmax), thermal insulating value(T.I.V.) and thermal conductivity(K) were measured by KES-F7 System and discussed in relation with the weight reduction rate, weft yarn linear density, t.p.m., weft density of fabric and weave structure.

• Journal of the Korean Society of Costume
• /
• v.61 no.6
• /
• pp.74-85
• /
• 2011

In modern fashion, accessories are recognized as indispensable articles for the completion of a look. Scarf and muffler has attained significance as a main fashion item. The purpose of study was to analyze the motifs of special material for muffler design on special material, and to seek unique and decorative effect using three dimensional method on the flat surfaced textile to give novelty. This study introduced technique of applying embroidery onto special materials such as fur and leather to achieve variety of texture effect. The results are as follows: Six designs were proposed. Each work has different detail and silhouette, and the unique motif design using embroidery with cotton, nylon, and bead on fur, leather, wool, and satin. This will be a method to develop value-added products in fashion and formative arts.

• Textile Coloration and Finishing
• /
• v.11 no.1
• /
• pp.1-8
• /
• 1999

This study surveys the mechanical properties such as surface properties(MIU, MMD, SMD) to the weight reduction rate of PET fabrics. For this purpose, 12 kinds of satin and 18 kinds of plain weave fabrics are prepared with change of the physical properties of weft yarn(T.P.M., density, and denier). The weight reduction rate was 0%, 12%, 25%, and 30%. Coefficient of friction(MIU), mean deviation of friction(MMD), and geometrical roughness(SMD) of the fabrics were measured and discussed with wed twist, yarn linear density, weft fabric density and weave structures.

• Fashion & Textile Research Journal
• /
• v.7 no.1
• /
• pp.101-105
• /
• 2005

This study surveys the warp and weft tension differences between projectile and air-jet looms and analyses the mechanical properties of worsted fabrics for garment with relation of these loom characteristics using KES-FB system. The paper is divided by two parts. In the 1st paper, the worsted fabric is woven as 5 harness satin weave using 1/40 Nm sirofil worsted warp yarn and 1/30 Nm worsted weft yarn by projectile(Sulzer) and air-jet looms(Picanol PAT and OMNI), respectively. The weavability is also analysed by measuring warp tension variation according to the warp position and weft tension of 3 kinds of looms. The relationship between shed amount and the warp tension is surveyed, and the relationship between end breaks and warp and weft tensions is also discussed.

• Fashion & Textile Research Journal
• /
• v.6 no.6
• /
• pp.765-771
• /
• 2004

This study surveys the warp and weft tension differences among 3 types of rapier looms and analyses the mechanical properties of worsted fabrics for garment with relation of these looms characteristics using KES-FB system. Raper is divided by two parts. In the 1st paper, the worsted fabric is woven as 5 harness satin weave using 1/40 Nm sirofil worsted warp yam and 1/30 Nm worsted weft yam by rapier looms such as FAST-R, THEMA-11-E and PICANOL-GTX respectively. The weavability is also analysed by measuring warp tension variation according to the warp position and weft tension of 3 kinds of looms. The relationship between shed amount and the warp tension is surveyed, and the relationship between end breaks and warp and weft tensions is also discussed.

• Textile Coloration and Finishing
• /
• v.13 no.1
• /
• pp.61-67
• /
• 2001

In this study, the fabrics were woven with worsted grams of Nm 2/72 and the structure of 5 harness satin on rapier and air-jet loom with different weft insertion mechanism and then fabrics were finished in the same processes. Also the physical properties were measured with KES-FB system and discussed with the characteristics of looms for comparing the difference of physical properties of the worsted fabrics which were woven with two different looms under the same structure. Pot shearing and compression properties, then showed similar behavior and the fabric finishing processes were seemed to affect much more than the difference of the loom types. For the surface roughness, the rapier fabrics showed higher irregularity than the air-jet fabrics.