• Textile Coloration and Finishing
• /
• v.13 no.1
• /
• pp.61-67
• /
• 2001

In this study, the fabrics were woven with worsted grams of Nm 2/72 and the structure of 5 harness satin on rapier and air-jet loom with different weft insertion mechanism and then fabrics were finished in the same processes. Also the physical properties were measured with KES-FB system and discussed with the characteristics of looms for comparing the difference of physical properties of the worsted fabrics which were woven with two different looms under the same structure. Pot shearing and compression properties, then showed similar behavior and the fabric finishing processes were seemed to affect much more than the difference of the loom types. For the surface roughness, the rapier fabrics showed higher irregularity than the air-jet fabrics.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.2 no.2
• /
• pp.41-54
• /
• 2000

History of fashion and clothing is needed to understand modern fashion and to predict Future mode. The period of Romanticism in fine arts was from the end 18th century up to the first half of 19th century. The characteristics of shilouttes were found in the emphasis owomen's body line. This feature of romantic fashion is founded in 1960, 1970, 1980, 1990'mode. Major characters of this times are retro of romantic costume. As time goes by, more romantic fashion was set up and new corncern of 2000 fashion trend. The Characteristics of romantic image in 2000 of fashion trend are the emphasis of romantic details and decorations. Such as ruffle, frill, shirring, beads, spangle, sequin, flower. Trend colors are pink, lilac, aqua blue, yellow, green, pastel color. Trend materials chiffon, organza, satin, velvet, gauze, georgette, lace and glittery material. And floral print and stripe print. Forward­looking fashion is ethnic­romantic image influenced India. Trend and fashion have very close relationship and if it is fully comprehended, it will be good opportunity to awkardness againnst new fashion line.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.2 no.2
• /
• pp.137-154
• /
• 2000

The purpose of this study is to investigate the transition of luster material after the tweentieth century. This study was conducted by means of designer collection, journal of fashion, museum data, fabric exhibition and Internet data. The results of this study were as follows: Before the synthetic fiber period, the luster materials were used satin, chamuse, gauze, damask brocade and velvet, except cashmere, mohair and rayon. They are made from silk by the way of giving difference surface property. But since 1960s, it has used not only synthetic fiber with smooth surface but also vinyl, latex, natural leather, synthetic leather and metal. Luster material recently has a tendency to natural and soft shiny, example silket finish, chintz finish, silico coating finish with paper touch feel and so forth.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.30 no.12 s.255
• /
• pp.1603-1610
• /
• 2006

In this paper compressive characteristics of composite egg-box panels were investigated and energy absorption was calculated from the nominal stress-strain relations obtained by the compressive tests. Several different stacking sequences and number of plies were introduced for investigation of static compression characteristics and the energy absorption rates of composite egg-box panels. The compressive stress-strain relation and energy absorption of various composite egg-box panels were compared with those of aluminium egg-box panels. From the test results it was found that the fracture behavior of composite egg-box panel was affected by stacking angle causing different local deformation, during lay-up and draping processes and types of prepreg; that is, plain weave carbon/epoxy and 4-harness satin glass/epoxy. The energy absorption capacity of composite egg-box panels were proved to be higher than that of aluminium egg-box panels with low mass.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2011.05a
• /
• pp.188-188
• /
• 2011

고급스러운 표면의 제품을 선호하는 사람들이 늘어나게 되면서 rough한 표면을 구현하여 광택을 줄인 사틴 니켈 도금 층에 대한 수요가 증가하고 있다. 현재 사틴 니켈 도금 용액에 사용되고 있는 사틴 효과를 구현하기 위한 첨가제 종류 중 에멀젼 타입의 첨가제는 시간이 경과함에 따라서 첨가제 입자들의 뭉침 현상이 발생하게 되고 이로 인하여 도금 용액의 수명이 9시간 정도로 짧게 나타난다. 이에 본 연구에서는 도금 용액 수명을 연장하기 위하여 사틴 첨가제의 재 첨가에 따른 표면 특성을 관찰하였다. 건욕 후 9시간마다 재 첨가할 경우 사틴 효과가 유지되어 용액 수명이 연장 된 것으로 판단된다.

• Textile Coloration and Finishing
• /
• v.16 no.5
• /
• pp.48-53
• /
• 2004

This study surveys the tension differences between Textec and Vamatex looms and analyses fabric mechanical properties using KES-FB system according to warp and weft tension differences. Fabric is designed as 5 harness satin weave using 150d/48f warp and 200d/384f weft polyester filaments, and is woven by $Omega^{\circledR$-Panter rapier loom by Textec Co.Ltd and P1001es rapier loom by Vamatex Co.Ltd., respectively. These grey fabrics are processed on the same dyeing and finishing processes. Weavability is also analysed by measuring warp tension variation according to the warp position. The relationship between shed amount and the warp tension on one fixed heald frame is surveyed, and the relationship between end breaks and warp and weft tensions is also discussed.

• Journal of the Korean institute of surface engineering
• /
• v.32 no.3
• /
• pp.208-210
• /
• 1999

A new additive for semi-brightness finish in nickel electroplating, having a quarternary ammonium salt structure, has been developed in this study. The effectiveness of the new additive was tested in laboratory-scale eletroplating tests as well as in a full-scale factory plating line. An examination of the plated surface showed that the new additive is as good as the one produced by the most commonly used additive in the nickel plating industry. The plated surface was examined by SEM, EPMA, and Reflectance Spectroscopy, and was found to be compatible to the one obtained with commercial additives. The new additive has a shelf life comparable with those of other commercially available additives. The additive developed in this study has an excellent potential to be used commercially.

• Journal of the Korean institute of surface engineering
• /
• v.32 no.3
• /
• pp.219-223
• /
• 1999

A new additive for semi-brightness finish in nickel electroplating, having a quarternary ammonium salt structure, has been developed in this study. The effectiveness of the new additive was tested in laboratory-scale eletroplating tests as well as in a full-scale factory plating line. An examination of the plated surface showed that the new additive is as good as the one produced by the most commonly used additive in the nickel plating industry. The plated surface was examined by SEM, EPMA, and Reflectance Spectroscopy, and was found to be compatible to the one obtained with commercial additives. The new additive has a shelf life comparable with those of other commercially available additives. The additive developed in this study has an excellent potential to be used commercially.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2012.05a
• /
• pp.318-318
• /
• 2012

최근 고급스러운 표면을 가지는 제품의 수요가 증가함에 따라 pore를 통하여 rough한 표면을 구현하고 광택을 줄인 사틴 도금이 각광받고 있다. 사틴 효과를 구현하기 위하여 도금 용액에 첨가되는 첨가제의 종류 중 에멀젼 타입의 사틴 첨가제는 시간이 경과함에 따라 첨가제 입자들의 뭉침 현상이 발생하기 때문에 건욕 후 2시간이 경과하면 사틴 효과가 감소하게 되고 연속 공정이 불가능하다. 이에 본 연구에서는 크기가 증가한 첨가제 입자들만을 제거한 후 첨가제를 소량씩 재첨가하여 사틴 니켈의 연속 공정이 가능하도록 필터링 및 첨가제 보충이 가능한 필터링 시스템을 도입하였다. 필터링 시스템에 의하여 2시간 경과 후 발생되는 뭉쳐진 첨가제가 선택적으로 제거 되어 pore의 크기를 제어할 수 있었으며 제거된 첨가제는 재첨가로 인해 보충되어 pore의 크기와 개수도 유지 할 수 있었다.

• Science of Emotion and Sensibility
• /
• v.21 no.3
• /
• pp.141-150
• /
• 2018

The purpose of this study is to investigate three-dimensional embroidery techniques for creating conductive fabric materials. Such techniques can increase the efficiency of energy harvesting by increasing the fabric's area during rubbing and brushing. We also investigate the fabric structure of the triboelectric energy harvesting type. Two experiments were conducted for this purpose. In Experiment I, the three-dimensional embroidery technique(satin technique, file technique) and the conductive fabric material(copper-based MPF, nickel-based MPF) were selected as the main variables affecting the efficiency of triboelectric energy harvesting from the human body. Four samples were fabricated according to a combination of two variables. In Experiment II, the harvesters fabricated by the three-dimensional embroidery method showing the highest efficiency were subjected to brushing processes and the voltages generated after processing were analyzed. As a result, in both conductive fabric materials, the pile embroidery fabric structure showed a higher efficiency than the satin structure. These results show the triboelectric energy harvesting principle, which is proportional to the charge density and the generated voltage. It can be seen that the structure of pile embroidery fabric with a large friction area is advantageous for increasing efficiency compared to satin embroidery-fabric structure with a relatively small friction area. Moreover, the energy harvesting efficiency after brushing was higher than that before processing due to the increased friction area, and it was found that the brushing method is advantageous for increasing the triboelectric-energy harvest.