• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.44 no.1
• /
• pp.70-79
• /
• 2016

Satrec Initiative successfully developed a high-resolution electro-optical camera system, EOS-D Ver.1.0. EOS-D Ver.1.0 is the main payload of DubaiSat-2 and Deimos-2, which are developed based on the SI-300 platform of Satrec Initiative. After the launch and early operation (LEOP) of DubaiSat-2 and Deimos-2, we performed refocusing for the telescope of EOS-D Ver.1.0 to compensate for the dimensional change of its metering structure by moisture out-gassing. Before and after refocusing, we conducted the performance evaluation of thermal control system(TCS) for EOS-D Ver.1.0 using the in-orbit telemetry data. The evaluation showed EOS-D Ver.1.0 was under well-controlled thermal environment, which demonstrates TCS was designed and developed to meet all requirements.

• Bulletin of the Korean Space Science Society
• /
• 2010.04a
• /
• pp.30.3-31
• /
• 2010

We performed a comprehensive comparison between GPS Global Ionosphere Map (GIM) and TOPEX/Jason (T-J) TEC data for the periods of 1998~2009 in order to assess the performance of GIM over the global ocean where the GPS ground stations are very sparse. Using the GIM model constructed by CODE at University of Bern, the GIM TEC values were obtained along the T-J satellite orbit at the locations and times of the measurements and then binned into various geophysical conditions for direct comparison with the T-J TECs. On the whole, the GIM model was able to reproduce the spatial and temporal variations of the global ionosphere as well as the seasonal variations. However, the GIM model was not accurate enough to represent the well-known ionospheric structures such as the equatorial anomaly, the Weddell Sea Anomaly, and the longitudinal wave structure. Furthermore, there seems to be a fundamental limitation of the model showing the unexpected negative differences (i.e., GPS < T-J) in the northern high latitude and the southern middle and high latitude regions. The positive relative differences (i.e., GIM > T-J) at night represent the plasmaspheric contribution to GPS TEC, which is maximized, reaching up to 100% of the corresponding T-J TEC values in the early morning sector. In particular, the relative differences decreased with increasing solar activity and this may indicate that the plasmaspheric contribution to the maintenance of the nighttime ionosphere does not increase with solar activity, which is different from what we normally anticipate. Among these results, the plasmaspheric contribution to the ionospheric GPS TEC will be presented in this talk and the rest of it will presented in the companion paper (poster presentation).

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.2
• /
• pp.279-285
• /
• 2011

The next generation wireless communication systems are required high BER performance better than present performance. Double binary Turbo code have error floor at high SNR, so it cannot be used in next generation wireless communication system. Therefore, many methods are proposed for overcome error floor at DVB-RCS NG(next generation). In this paper, we analysis structure of third-dimension Turbo code(3D-turbo code). 3D-Turbo code overcomes error flow by additive post-encoder in conventional DVB-RCS Turbo code. Performance of 3D-Turbo code is changed by post-encoder form, interleaving method, value of ${\lambda}$. So we are simulated by those parameter and proposed optimal form. By a result, performance of 3D-Turbo is better than conventional DVB-RCS Turbo code and it overcome error floor of conventional DVB-RCS Turbo code.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.8 no.4
• /
• pp.788-794
• /
• 2007

The policy of US DoD is moving towards implementation of Network Centric Warfare(NCW) concepts. NCW is commonly described as the integration and synchronization of four key interdependent elements such as command and control, sensor system, engagement systems and the network. Therefore the military policy of Korea military is needed to access and examine the policy of NCW communication environment and crypto communication, which is able to apply it. In this case study, We are reviewed the security framework of the concept of network centric warfare in the centering around the US. It is introduced the core technology in the network centric warfare, and it is reviewed the security framework such as, the requirements of security, the characteristics security of global information grid, joint tactical radion system, net centric enterprise services, transformational communication satellite, in the basis of core technology, and analysis the effect of crypto communication relay between command node and surbornate node in NCW environment. This report support the assistance, which is considered the elements of surrounding effects in the varied crypto communication research area of NCW.

• Aerospace Engineering and Technology
• /
• v.7 no.1
• /
• pp.115-120
• /
• 2008

The thermistors and AD590 are widely used for temperature measurement in space application. The resistance of thermistor will vary according to the temperature variation therefore the external voltage or current stimulus signal have to be provided to measure resistance variation. Recently high resolution electro optic camera system of satellite requires tight thermal control of the camera structure to minimize the thermal structural distortion which can affects the image quality. In order to achieve $1^{\circ}$(deg C) thermal control requirement, the accuracy of temperature measurement have to be higher than $0.3^{\circ}$(deg C). In this paper, the accuracy of temperature measurement using thermistors is estimated and analyzed.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.37 no.3
• /
• pp.209-219
• /
• 2019

Satellite imagery occurs geometric and radiometric errors due to external environmental factors at the acquired time, which in turn causes false-alarm in change detection. These errors should be eliminated by geometric and radiometric corrections. In this study, we propose a methodology that automatically and simultaneously performs geometric and radiometric corrections by using the SURF (Speeded-Up Robust Feature) algorithm and the mask filter. The MPs (Matching Points), which show invariant properties between multi-temporal imagery, extracted through the SURF algorithm are used for automatic geometric correction. Using the properties of the extracted MPs, PIFs (Pseudo Invariant Features) used for relative radiometric correction are selected. Subsequently, secondary PIFs are extracted by generated mask filters around the selected PIFs. After performing automatic using the extracted MPs, we could confirm that geometric and radiometric errors are eliminated as the result of performing the relative radiometric correction using PIFs in geo-rectified images.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.30 no.2
• /
• pp.95-103
• /
• 2019

In this paper, we present a microstrip-to-substrate integrated waveguide(SIW) transition and microstrip-to-hollow SIW(HSIW) transition for Ku-band satellite communication systems. For the complete utilization of the HSIW, a structure filled with air instead of a dielectric material, a microstrip-to-HSIW transition is designed, fabricated, and compared with a microstrip-to-SIW transition. A back-to-back microstrip-to-SIW transition is measured in the range 12~18 GHz; it exhibits a return loss ${\geq}20dB$ and an insertion loss of $1.5{\pm}0.2dB$. In contrast, a back-to-back microstrip-to-HSIW transition exhibits a return loss of at least 15 dB and an insertion loss of $0.55{\pm}0.2dB$ in the same frequency range.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.13 no.6
• /
• pp.1207-1212
• /
• 2018

The signal intelligence (SIGINT) technology is actively used for collecting various data, in a number of fields, including a military industry. In order to collect the signal information and data and to transmit/receive the collected data efficiently, the accurate angle-of-arrival (AOA) information is required and communication disturbance from the interference or jamming signal should be minimized. In this paper, we present the structure of an adaptive beam-forming satellite system based on the planar array antenna, for collecting and transmitting/receiving the signal information and data efficiently. The presented adaptive beam-forming system consists of an antenna in the form of a planar array, an AOA estimator based on the Multiple Signal Classification (MUSIC) algorithm, an adaptive Minimum Variance Distortionless Response (MVDR) interference canceler, a signal processing and D/B unit, and a transmission beamformer based on Minimum mean Square Error (MMSE). In addition, through the computer simulation, we evaluate and analyze the performance of the proposed system.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.13 no.1
• /
• pp.147-155
• /
• 2003

The diffusion of internet infrastructure and a fast increase of Population to use it is becoming a base of the service that can use various information, data and digital contents which were provided through off-line physically and used. Recently, the. techniques for copy deterrence and copyright protection have been important in e-commerce because various contents in digital form can be duplicated easily. The Access Control(AC) technique that only a user having the qualifications can access and use contents normally has been studied. The Conditional Access System(CAS) used in a satellite broadcasting md Digital Right Management System(DRMS) used for contents service are representative models of current commercialized access control. The CAS and DRM can be considered as an access control technique based on the payment based type(PBT). This paper describe the access control method of payment free type(PFT) suggested in ［5］ which are independent on the payment structure. And then we suggest a new access control method of payment free type which is more efficient than the previous one.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.50 no.7
• /
• pp.455-463
• /
• 2022

As the need for R&D for high reliability cameras, such as satellite cameras, increases, the reliability of the bonding strength properties between an opto-mechanical structure and an optical component has been secured through specimen tests. However, the widely used specimen shape is not suitable for the application of glass and glass-ceramic material, which is fragile, making it difficult to obtain accurate bonding properties due to stress concentration in glass parts before reaching the bonding strength limit. In this study, the stress distribution characteristics in the shear test condition for various specimen shapes were studied analytically, based on the test results of the glass material's own fracture. Through this, the shape characteristics capable of relieving the stress concentration of the glass part were derived, and the range of the bonding shear strength verifiable by the specimen test was improved.