• International Journal of Aeronautical and Space Sciences
• /
• v.8 no.1
• /
• pp.105-114
• /
• 2007

This article presents the details of a designed control moment gyroscope (CMG) with a constant speed momentum wheel and one-axis-gimbal, and its experimental results performed at Korea Aerospace Research Institute. The CMG which is able to produce a torque of lOO mNm per each, is mounted in a pyramid configuration with four SGCMGs. Each CMG test and a single axis maneuver test with four-CMG cluster configuration are performed to confirm their performance on a ground-test facilities consisted of three major parts: a vibration isolation system, a dynamic force plate (Kistler sensor), and a DSP board. These facilities provide the accurate data of three axial and torques from the control moment gyro. Details of the CMG experimental results are presented with discussion of the experimental errors. The experimental data are compared with theoretical results and both results are used to verify their performance specifications.

• Journal of Astronomy and Space Sciences
• /
• v.26 no.1
• /
• pp.31-46
• /
• 2009

An Unscented Kalman Filter (UKF) for estimation of the attitude and rate of a spacecraft using only magnetometer vector measurement is developed. The attitude dynamics used in the estimation is the nonlinear Euler's rotational equation which is augmented with the quaternion kinematics to construct a process model. The filter is designed for small satellite in low Earth orbit, so the disturbance torques include gravity-gradient torque, magnetic disturbance torque, and aerodynamic drag torque. The magnetometer measurements are simulated based on time-varying position of the spacecraft. The filter has been tested not only in the standby mode but also in the detumbling mode. Two types of actuators have been modeled and applied in the simulation. The PD controller is used for the two types of actuators (reaction wheels and thrusters) to detumble the spacecraft. The estimation error converged to within 5 deg for attitude and 0.1 deg/s for rate respectively when the two types of actuators were used. A joint state parameter estimation has been tested and the effect of the process noise covariance on the parameter estimation has been indicated. Also, Monte-Carlo simulations have been performed to test the capability of the filter to converge with the initial conditions sampled from a uniform distribution. Finally, the UKF performance has been compared to that of the EKF and it demonstrates that UKF slightly outperforms EKF. The developed algorithm can be applied to any type of small satellites that are actuated by magnetic torquers, reaction wheels or thrusters with a capability of magnetometer vector measurements for attitude and rate estimation.

• Bulletin of the Korean Space Science Society
• /
• 2008.04a
• /
• pp.30.3-30.3
• /
• 2008

• Bulletin of the Korean Space Science Society
• /
• 2005.10a
• /
• pp.65-65
• /
• 2005

• Journal of the Korean Magnetics Society
• /
• v.16 no.3
• /
• pp.182-185
• /
• 2006

In this work, we have constructed 3-axis flux-gate magnetometer for the attitude control of satellite. The constructed magnetometer shows uncertainty of ${\pm}1%$, noise level of $0.2nT/\sqrt{Hz}$ at 1 Hz under 1W power consumption. Environment test for satellite component, acceleration test and thermal cycle test were carried out. For the acceleration test, magnetometer was vibrated frequency ranging from 10 Hz to 1 kHz at 15 g (g : gravitational acceleration at earth), and for thermal cycle test, 4 times of thermal cycle were carried out temperature ranging from $-55^{\circ}C\;to\;+80^{\circ}C$ under vacuum of $1x10^{-6}Torr$.

• Journal of Institute of Control, Robotics and Systems
• /
• v.8 no.1
• /
• pp.54-59
• /
• 2002

In the three-axis control of satellites by using on-board actuators, gyros are usually used to measure the attitude angles and angular rates. The gyros are operated by electronic parts and mechanical actuators. The digital components of the electronic parts consist of largely FPGA (Field Programmable Gate Array) as one of the methods for VLSI(Very Large Scale Integrated) circuit design, while the mechanical parts provide output signal directly by mechanical actuation of a spinning rotor. In this research, a mixed mode of gyro is implemented in FGA. In addition to the hardware implementation, the simulation study was conducted by using the SABER for the mixed mode simulator. Results for the practical implementation of the satellite ACS (Attitude Control System) interfaced with the data processing are also presented to validate the FPGA implementation.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.30B no.1
• /
• pp.29-37
• /
• 1993

The purpose of this paper is to estimate the attitude and the position of SPOT satellite which are needed in producing DEM(Digital Elevation Model) using SPOT satellite image pairs. DEM extraction is consists of three parts. First part is the modeling of satellite position and atitude, second part is the matching of two images to find corresponding point of them and third part is to calculate the elevation of each point by using the result of the first and second part. For modeling inaccessible area, extended modeling algorithm which removes the GCP(Ground Control Point) most errorneous from the GCPs extracted from map iteratively is proposed According to the experiments using a collinearity equation, the second order polynomials are shown to the optimal for .omega.(pitch), and Zs parameters while the first order ones for .kappa.(yaw) .PHI.(roll), Xs, and Ys parameters. The input images used in this paper are 6000*6000 level 1A panchromatic digital SPOT images of Chungchong-do, Korea. With 30 GCPs, experiments on SPOT images show that the planimetric and altimetric RMS errors are 7.11m and 7.10m, respectively, for test points.

• International Journal of Aeronautical and Space Sciences
• /
• v.13 no.2
• /
• pp.260-265
• /
• 2012

Satellite devices for fine attitude control of the Science & Technology Satellite-2 (STSAT-2). Based on the mission requirements of STSAT-2, the conventional analog-type sun sensors were found to be inadequate, motivating the development of a compact, fast and fine digital sun sensor (FDSS). The FDSS uses a CMOS image sensor and has an accuracy of less than 0.03degrees, an update rate of 5Hz and a weight of less than 800g. A pinhole-type aperture is substituted for the optical lens to minimize its weight. The target process speed is obtained by utilizing the Field Programmable Gate Array (FPGA), which acquires images from the CMOS sensor, and stores and processes the image data. The sensor accuracy is maintained by a rigorous centroid algorithm. This paper describes the FDSS designs, realizations, tests and calibration results.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2005.11a
• /
• pp.426-430
• /
• 2005

The COMS(Communication, Ocean and Meteorological Satellite) is the first developed three-axis stabilization multi-function satellite on geostationary earth orbit(GEO) in korea, presently scheduled to be launched in 2008. The COMS propulsion system provides the thrust and torque required for the insertion into GEO, attitude and orbit control/adjustment of spacecraft. In this paper, system design of propulsion system, basic functions and design requirement of components are described.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2011.11a
• /
• pp.456-459
• /
• 2011

The Dual-type Solenoid Valve was developed for a domestic production of a fuel-supply valve on the satellite attitude control thruster system. The satellite valve using a hydrazine as a fuel must fulfill the cycle life, shock, vibration and the environment of an extremely low temperature In addition to the basic performance of the response time, mass flow and leakage etc.. in this paper, the design, production and performance experiment using the nitrogen pneumatic equipment were conducted.