• 한국항공우주학회지
• /
• 제31권2호
• /
• pp.96-102
• /
• 2003

통신방송위성 Ka-대역 기술인증모델(EQM)탑재체의 열진공시험을 위한 기계지상지원장비 패널의 열설계를 수행하고 열진공 챔버내에서의 성능시험을 위한 열환경을 수치적 방법으로 예측하였다. 탑재체 패널의 히트파이프 배열 설계 검증을 위한 열해석은 SINDA를 사용하였다. 개발된 16개 히트파이트 배열은 Ka-대역 중계기 전장품들의 성능시험을 위해 적절하게 설계되었다. 고온 성능시험은 패널 외부 면재에 가해지는 열유속이 265W/㎡ 일 때 수행되고, 저온 성능시험은 패널 외부로부터 열유입이 없을 때 수행된다. 히트파이프의 최대 열수송 용량은 2723 W-cm로 예측되었다.

• Journal of Astronomy and Space Sciences
• /
• 제30권4호
• /
• pp.335-344
• /
• 2013

TRiplet Ionospheric Observatory-CubeSat for Ion, Neutron, Electron & MAgnetic fields (TRIO-CINEMA) is a CubeSat with 3.14 kg in weight and 3-U ($10{\times}10{\times}30$ cm) in size, jointly developed by Kyung Hee University and UC Berkeley to measure magnetic fields of near Earth space and detect plasma particles. When a satellite is launched into orbit, it encounters ultra-high vacuum and extreme temperature. To verify the operation and survivability of the satellite in such an extreme space environment, experimental tests are conducted on the ground using thermal vacuum chamber. This paper describes the temperature control device and monitoring system suitable for CubeSat test environment using the thermal vacuum chamber of the School of Space Research, Kyung Hee University. To build the chamber, we use a general purpose thermal analysis program and NX 6.0 TMG program. We carry out thermal vacuum tests on the two flight models developed by Kyung Hee University based on the thermal model of the TRIO-CINEMA satellite. It is expected from this experiment that proper operation of the satellite in the space environment will be achieved.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 추계학술대회논문집 II
• /
• pp.933-939
• /
• 2001

A Satellite shipping container must afford the satellite a relatively benign thermal, vibration, and particle environment that is oblivious to the extreme temperatures, sand, dust, vibrations and shocks that can accompany the transportation. In this study, we have designed a vibration isolation system of a spacecraft container that will be used to transport a satellite called KOMPSAT (KOrea Multi-Purpose SATellite) -2 from KARI (Korea Aerospace Research Institute) Taejon to its launch site. To identify the dynamic characteristics of the system, a 1/3-scaled mockup of the container was developed. A large electro-magnetic shaker (Max. 240 KN) was used to excite the mockup, and vibration signals from 20 points were collected for modal tests. Numerical simulations through CATIA 3D Modeling were performed to identify the behavior of isolation springs. The results showed that a simplified model predicts the behavior in a reasonable accuracy. Moreover, the model guides us how to design a full-scaled satellite-shipping container.

• Current Optics and Photonics
• /
• 제6권1호
• /
• pp.69-78
• /
• 2022

A high-resolution camera is a precise optical system. Its vibrations during transportation and launch, together with changes in temperature and gravity field in orbit, lead to different degrees of defocus of the camera. Thermal refocusing is one of the solutions to the problems related to in-orbit defocusing, but there are few relevant thermal refocusing mathematical models for systematic analysis and research. Therefore, to further research thermal refocusing systems by using the development of a high-resolution micro-nano satellite (CX6-02) super-resolution camera as an example, we established a thermal refocusing mathematical model based on the thermal elasticity theory on the basis of the secondary mirror position. The detailed design of the thermal refocusing system was carried out under the guidance of the mathematical model. Through optical-mechanical-thermal integration analysis and Zernike polynomial calculation, we found that the data error obtained was about 1%, and deformation in the secondary mirror surface conformed to the optical index, indicating the accuracy and reliability of the thermal refocusing mathematical model. In the final ground test, the thermal vacuum experimental verification data and in-orbit imaging results showed that the thermal refocusing system is consistent with the experimental data, and the performance is stable, which provides theoretical and technical support for the future development of a thermal refocusing space camera.

• 한국항공우주학회지
• /
• 제44권1호
• /
• pp.80-87
• /
• 2016

본 논문에서는 계절 및 주야의 온도변화를 고려한 관측위성의 열지향오차해석을 실시한다. 관측위성은 임무수행기간 동안 다채널의 관측센서를 이용해서 지구표면의 영상을 촬영한다. 그러나 주야 및 계절별로 최대 200도의 온도환경 차이가 발생하며 이로 인해 관측센서 및 별추적기의 시선벡터가 변화되고 정해진 목표지점의 영상촬영이 어렵다. 이런 문제를 사전예측하고 대응하기 위해서 열지향오차해석을 실시한다. 우선 궤도열환경해석으로부터 도출된 성긴 온도장 정보를 상세한 구조유한요소모델에 PAT기법을 이용해 보간하여 온도변화에 따른 열변형해석을 수행하였다. PAT로 보간된 온도분포의 정확도를 검증하였으며, 열변형해석결과로부터 열지향오차를 도출하였다.

• Journal of Astronomy and Space Sciences
• /
• 제25권4호
• /
• pp.491-504
• /
• 2008

태양센서는 인공위성의 자세제어에 필수적인 센서로서, 위성으로 입사되는 태양 빛의 방향을 측정하거나 위성이 태양을 보지 못하는 상태에 있는지를 판단하기 위해서 사용되고 있다. 이 논문에서는 저궤도 인공위성용 저정밀 태양센서의 성공적인 개발을 위하여, 비행모델 저정밀 태양센서를 개발하기 전에 태양센서 선행모델과 인증모델의 개발 과정 및 결과를 보여준다. 태양센서의 개발은 제작 특성상 공정의 명확성, 정밀성 그리고 많은 제작 경험을 필요로 한다. 이 논문에서는 선행모델과 인증모델을 개발함으로써, 공정의 명확성 및 정밀성을 갖도록 보완하였다. 따라서, 성능 요구 조건을 만족하는 결과를 얻을 수 있었다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 1998년도 춘계학술대회논문집; 용평리조트 타워콘도, 21-22 May 1998
• /
• pp.114-121
• /
• 1998

This paper presents the model updating of an equipment panel by using modal test and sensitivity analysis. The equipment panel is one of the major structures of communication satellite, on which broadcasting and communication equipments are mounted. For high rigidity and light weight, the panel was designed as an aluminum honeycomb sandwich panel. In addition, heat pipes were embedded in the panel for thermal control. It is essential to improve the finite element model of a satellite by using modal test in order to verify the satellite is designed with adequate margin under launch environment. In this paper, Young's modulus of aluminum facesheet was selected as a modified parameter by sensitivity analysis. The effect of rotational springs of boundary points was also considered.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 추계학술대회
• /
• pp.216-221
• /
• 2003

A thermal vacuum chamber is mainly used to simulate thermal environments of a test satellite in satellite orbits in which daily temperature variations range from 80K to above 400K depending on solar radiation under the vacuum below $10^{-4}$ torr. The test facility is quite complex and consists of expensive parts. So any modification of control software is discouraged in fear of unexpected system failure. The purpose of this study is to develop a realtime dynamics model of the thermal vacuum chamber in view of controller design and simulate its electrical inputs and outputs for interface with a PLC (programmable logic controller). A PLC program that was used in the thermal vacuum chamber is applied to the realtime simulator. The realized simulator dynamics is found to be quite similar to that of the thermal vacuum chamber and serve to an appropriate plant to verify the control performance of a programmed PLC.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1994년도 Proceedings of the Korea Automatic Control Conference, 9th (KACC) ; Taejeon, Korea; 17-20 Oct. 1994
• /
• pp.49-53
• /
• 1994

Advanced Real-Time Satellite Simulator(ARTSS) has been developed to support the telemetry, tracking and command operations of the ETRI satellite control system and to provide satellite engineers a more powerful and informative satellite simulations tool on the desktop. To provide extensive simulation functions for a communication satellite system in the pre-operational and operational missions, ARTSS uses a geosynchronous orbit(GEO) satellite model consisting of the attitude and orbit control subsystem, the power subsystem, the thermal subsystem, the telemetry, command and ranging subsystem, and the communications payload subsystem. In this paper, the system features and functions are presented and the satellite subsystem models are explained in detail.

• 한국추진공학회지
• /
• 제18권6호
• /
• pp.59-67
• /
• 2014

1 N급 단일추진제 하이드라진 추력기 개발모델에 대한 인수수준 랜덤 진동시험과 장기수명 연소시험이 수행되었다. 랜덤 진동시험 결과로부터 1 N급 추력기 개발모델로 구성된 이중추력기모듈의 고유 진동수는 부품수준 요구조건(100 Hz)을 상회하였으며, 구조적으로 강건함을 확인하였다. 또한 20 kg 이상의 추진제가 사용된 장기수명 연소시험 결과 연속모드 추력 감소는 약 7% 이하, 추력 불안정 현상은 ${\pm}5%$ 이내로 나타났다. 컴퓨터단층촬영을 이용해 추력기 내부의 촉매를 촬영한 결과 촉매의 손실은 약 7% 이하로 추력기 개발모델의 설계가 적절함을 보여주었다.