• Journal of Korean Society of Forest Science
• /
• v.36 no.1
• /
• pp.26-32
• /
• 1977

Press drying was used on sapwood and heartwood of oak (Qercus acutissima Carruthers) to find profitable means of drying low grade logs. This study was designed to investigate the process of press drying considering core temperature, current moisture content, drying rate, drying time, final moisture content, dimensional change and drying defects. The drying tests were conducted using 1.5 centimeter thick material at platen temperature of $175^{\circ}C$ and pressure of 35psi. The results were summarized as fallows. 1. Core temperature was divided into three stages of drying characterized by initial heating period, plateau temperature, and period of rising core temperature. Plateau temperature of heartwood material was higher and longer than that of sapwood material. 2. The predicting equation for change in drying rate of sapwood material was log y=-2.7925-0.0811x as function of time. That of heartwood material was log y=-3.3382-0.0468x. 3. Sapwood material reduced the moisture content from 59 to 2.5 percent in 45minutes. Heartwood material reduced the moisture content from 64 to 3.3 percent in 55 minutes. 4. Shrinkage during press drying were 20.4 percent in thickness direction and 2.5 percent in width direction. Recovery on equilibrium conditioning at 65 percent relative humidity and temperature of $20^{\circ}C$. were 11.4 percent in thickness direction and 49.4 percent in width direction. 5. Heartwood material developed severe honeycombing and moderate checking. The sapwood material dried without honeycombing, checking and collapse. All material kept wood flat.

• Journal of the Korean Wood Science and Technology
• /
• v.32 no.2
• /
• pp.19-25
• /
• 2004

This study was carried out to investigate a radial distribution of moisture contents (MCs) within a log cross section (LC) during oven-drying of 3 mm-thick circumferential slices cut from several domestic softwoods LCs.For Korean red pine, drying rate of sapwood slices during oven-drying represented much higher values than that of heartwood slices, and so sapwood with higher green MC early reached below fiber saturation point (FSP) rather than heartwood did. However, this distribution of moistures did not last for long duration. For Japanese larch, green MC of sapwood was approximately three times higher than that of heartwood. This similar distribution in MC was lasted until about 20% average MC. The MC was around uniform throughout the sapwood of Ginkgo when green and during oven-drying, although it was somewhat fluctuated. For Japanese cedar, the heartwood with so low moistures around FSP would begin to shrink from the beginning stage of drying, but the sapwood above hygroscopic MC prevents the heartwood from shrinking, and consequently, the heartwood or the transition wood goes into tension stress. The results for Japanese cypress showed that the green MCs of the sapwoods were much lower than those for heartwoods, and then this trend was continued until about 20% in average MC. For Chinese thuja, the green MCs of sapwoods were about 2 times as high as those of heartwood, but this along the radial gradient in MC rapidly became gentle during oven-drying.

• Research in Plant Disease
• /
• v.20 no.4
• /
• pp.270-274
• /
• 2014

Division of Forest Diseases & Insect Pests, Korea Forest Research Institute, Seoul 130-712, Korea The objective of this study was to evaluate the virulence of geographically different isolates of oak wilt pathogen, Raffaelea quercus-mongolicae and other Raffaelea species. In this study, mature trees of Quercus mongolica were inoculated with the various isolates of Raffaelea spp. and their virulence was evaluated by measuring the extent of sapwood discoloration resulting from the inoculation. The average length of discolored sapwood in a lateral direction was longest in the trees inoculated with the isolates from Korea (8.69 cm) followed by R. quercivora (7.51 cm) and the other Raffaelea spp. (3.35 cm). The lateral length of discolored sapwood caused by the inoculation with Korean strains varied from 4.71 to 14.90 cm indicating their differences in virulence. The area of discolored sapwood caused by the inoculation with Raffaelea spp. varied from 1.57 to $8.42cm^2$ indicating their differences in virulence. Based on the length and area of the discolored sapwoods, isolated YY and wj43 appeared to have the highest virulence among all the Raffaelea isolates tested. Each of the two isolates was obtained from Gangwon Province and Jeonbuk Province, respectively.

• Journal of the Korean Wood Science and Technology
• /
• v.36 no.4
• /
• pp.44-51
• /
• 2008

In this study, the effects of carbonization temperature on the physico-chemical properties of Korean red-pine wood (Pinus densiflora S. et Z.) powder charcoal are studied by elemental analysis, nitrogen adsorption-desorption and SEM techniques. The surface structure and physico-chemical properties of the wood charcoal greatly depend on the carbonization temperature and their temperature dependences for sapwood (swd) and heartwood (hwd) are qualitatively analogous. Because of the differences in characteristics such as hardness and composition between heartwood and sapwood, charcoals from heartwood have larger specific surface area and smaller average pore diameter than that from sapwood. Because the decomposition reaction mostly proceeds in the precarbonization stage, the charcoal produced in this stage mainly consists of carbon. The second carbonization reaction is insignificant but still proceeds up to $700^{\circ}C$, and the specific surface area continuously increases. Above $800^{\circ}C$, the surface area is reduced by the pore-filling and narrowing effects and especially above $900^{\circ}C$, new carbon phase with hexagonal column rooted into the pore is formed. The nitrogen adsorption-desorption isotherm of the charcoal is classified as type I and its hysteresis loop was as type H4.

• Journal of Korean Society of Forest Science
• /
• v.79 no.4
• /
• pp.419-423
• /
• 1990

This study was carried out to investigate the cause of pith-damaged wood formation, the state of growth, and difference of chemical composition of Japanese Larix(L. leptolepis Gorden). 1. Larix grew normaly to 10 years, and the volume increment was 32.4%. But it was gradually decreased to 19.4% from 11 to 13 years that the heartwood damage was occurred. Therefore, the volume increment was decreased 13%. The decayed wood was formed from fire wound portion of bark by forest fire. The volume loss from pith-dagmaged wood occurred by forest fire was more than 20%. 2. On the ash content, heartwood(0.05%) and pith-damaged wood(0.08%) was lower than sapwood(0.29%). The difference of extractive contents are considered the reason. It is considered that this ash content difference is depend upon the extractive contents among sap, heart and decayed wood parts. Holocellulose contents were from 54.3% to 59.3% and there were no difference among heartwood, pith-damaged wood, and sapwood, On the pentosan contents, heartwood(6.3%) and pith-damaged wood(6.6%) were higher than sapwood. Lignin contents of pith-damaged wood was tower than heartwood (34.4%). This seems to weaken all kinds of wood strength.

• Journal of Korean Society of Forest Science
• /
• v.85 no.3
• /
• pp.343-346
• /
• 1996

The cultured stain fungus isolated firstly from discolored wood of Pinus rigida was inoculated on wood blocks to investigate the invading pathway of the fungus. The inoculated fungus rapidly colonized in the ray parenchyma and moved radially along them. In process of time the fungus penetrated tracheids where it started to move into vertical direction. After 90 days the fungus colonized all over the wood tissue, therefore some cell lumens were filled with full of hyphae. In addition methanol extracts did not affect the invading pathway of the stain fungus.

• Journal of Forest and Environmental Science
• /
• v.30 no.1
• /
• pp.56-61
• /
• 2014

Macroscopic and microscopic characteristics of Yellow-hearted pine and Red pine were investigated. Wood color, annual ring width and latewood percentage were observed by the naked eye. Anatomical properties as the structure of three sections and cell dimensions were examined by an optical microscopy. As a result, the color of bark in Yellow-hearted pine was Reddish-grey, and Red pine showed brown or gray. The color of heartwood and sapwood in Yellow-hearted pine was deep-yellow to brown and creamy-white. And the color of heartwood and sapwood in Red pine was light-brown and light-yellow. The annual ring width of Yellow-hearted pine was narrower than that of Red pine, and the latewood percentage of Yellow-hearted pine was a little higher than that of Red pine. There was no significant difference in the anatomical characteristics between Yellow-hearted pine and Red pine.

• Journal of the Korea Furniture Society
• /
• v.24 no.4
• /
• pp.345-349
• /
• 2013

Yellow poplar is well known commercial hardwood species in the world because of its availability, rapid growth, large size, excellent form, early natural pruning, and the good working quality of the wood. Therefore, yellow poplar (Liriodendron tulipifera L.) has been adopted in South Korea for decades ago, and its cultivating the saplings and silvicultural system have been studied. However, yellow poplar is still embroiled in controversy for utilization of use and worth. This species has not only advantages such as lower weight, light color, and higher machinability and bending processing, but also has disadvantages which are bad smell and different colors on heartwood and sapwood. In this study, the objective was that use of yellow poplar board as furniture materials by drying and painting process. Thirty years old yellow poplar was cut and dried for 7 days by high-frequency dryness. Adjustment of color tone to walnut color was conducted with multiple colorants and various number of spread times. Uniform color of yellow poplar on heartwood and sapwood was accomplished by applying 1 time stain (green), 2 times transparent primer, 1 time middle-painting (walnut), and 2 times top-painting (walnut) in sequentially. The painted yellow poplar board was used to manufacture table and dressing table. During the furniture manufacture process, no critical issues were occurred on part of jointing and painting. This painting method may be useful data for future use of yellow poplar as furniture materials.

• Mycobiology
• /
• v.29 no.4
• /
• pp.205-209
• /
• 2001

The Korean sawmills have recently recognized the importance of prevention of fungal discoloration due to increased losses in revenue. Before establishing integrated control strategies of fungal discoloration, more complete knowledge about causal organisms is needed. As a first step, we initiated a through survey of fungi colonizing commercially important softwood(Pinus dens flora, Pinus koraiensis, and Pinus radiata) logs and lumber in Korea. In this paper we report results obtained from Japanese red pine(Pinus densiflora) log study. In summer 2000, fungi were isolated from Japanese red pine logs in storage, and identified based on their cultural and morphological characteristics. A total of 595 fungi were isolated, representing 21 genera and 30 species. Mold fungi, mostly Trichoderma species, were the most frequently isolating fungi, representing more than half of all isolates. Dematiaceous fungi represented approximately one fifth of the isolates, and Rhinocladiella atorvirens was the most abundant in all samples. Opiostoma species represented 7% of all isolates from cores planted on malt extract agar(MEA) and the incidence of these species doubled with the addition of streptomycin and cycloheximide to MEA. The results indicate that Japanese red pine sapwood is susceptible to colonization by a variety of fungal species. As a result, control strategies that concentrate on one fungus may have limited success because of interference from competing flora.

• Journal of Korean Society of Forest Science
• /
• v.85 no.2
• /
• pp.325-328
• /
• 1996

The cultured stain fungus isolated firstly from discolored wood of Pinus rigida was inoculated on wood blocks to investigate the invading pathway of the fungus. The inoculated fungus rapidly colonized in the ray parenchyma and moved radially along them. In process of time the fungus penetrated tracheids where it started to move into vertical direction. After 90 days the fungus colonized all over the wood tissue, therefore some cell lumens were filled with full of hyphae. In addition methanol extracts did not affect the invading pathway of the stain fungus.