• Applied Chemistry for Engineering
• /
• v.27 no.3
• /
• pp.325-329
• /
• 2016

Extracting natural dyes have been widely studied since the needs of eco-friendly and non-toxic natural dyes increased. In this paper, the natural dyes were extracted from sappan wood, gardenia, and mugwort containing brazilein, crocin, and chlorophyll process. After the extraction with variables of pH of solvent and reaction time, the chromaticity of extracted natural dyes was analyzed using quantitative values from brightness and color coordinate (L, a, b) based on the target colors of red, yellow and green. For the case of brazilein and crocin, the cadmium red and cadmium yellow, respectively were extracted. In the case of sappan wood and gardenia, the red pigment under pH 12 (${\Delta}$ = 18.2) and the yellow pigment at pH 9 (${\Delta}$ = 18.4) were extracted respectively. However, the color of extracted chlorophyll from mugwort was different from the target chrome green.

• Conservation Science in Museum
• /
• v.12
• /
• pp.9-17
• /
• 2011

This study examined non-destructive UV-Vis spectrophotometry as well as 3-D fluorescence spectrophotometry of textile that made use of red dye such as Sappan wood, madder, Safflower, Gromwell. The authors produced two textile specimen that were dyed by not only two kinds of textile (cotton and silk) but also three kinds of mordanting (no-mordanting, alumen and iron), and they investigated effects of each dye material upon investigation results. At analysis with UV-Vis spectrophotometry of dyed textile specimen, dyeing made by sappan wood, madder and gromwell had significant difference depending upon mardant regardless of kinds of textile, and safflower had no significant difference depending upon textile and mordant. At analysis with 3D-fluorescence spectrophotometry, specimen dyed with sappan wood had difference with mordants, and with madder, there were difference with textiles, and safflower had inherent fluorescence spectrum regardless of textiles and mordants, while gromwell had no fluorescence spectrum.

• Korean Journal of Human Ecology
• /
• v.16 no.5
• /
• pp.979-986
• /
• 2007

The purpose of this study is to investigate the dyeability, and the hand of soybean/cotton blended fabric after dyeing with natural and synthetic dyes. Soybean/cotton blended fabrics dyed with extracted solution from turmeric, sappan wood, gardenia and synthetic dyes(weak-acid dyes, reactive dyes, direct dyes). The hand value of soybean/cotton blended fabrics dyed with 6 different dyes was measured using Kawabata Evaluation System. The results are as follows; 1. The K/S value of the soybean/cotton blended fabric dyed with sappan wood extracts was the highest. 2. The color fastness of the soybean/cotton blended fabric dyed with reactive dyes was excellent. The fastness to the light of the same fabric was much better than the other fabrics. 3. Linearity of load-extension and tensile energy of the soybean/cotton blended fabric dyed with sappan wood extracts showed very high. Shear stiffness of the soybean/cotton blended fabric dyed with weak-acid dyes was much higher than that of fabric of dyed with reactive dyes. Bending property of the fabrics dyed with natural colorants(sappan wood, gardenia) showed very high, but that the fabric dyed with reactive dyes was very poor. 4. In the primary hand value, stiffness and anti-drape stiffness of the fabric dyed with weak-acid dyes showed the highest. Fullness and softness of the fabric dyed with weak-acid dyes showed very low.

• Textile Coloration and Finishing
• /
• v.31 no.4
• /
• pp.268-275
• /
• 2019

In this study, silk fabrics was dyed with sappan wood extracts fermented for 5 and 15 days, respectively, and then the dyeability, durability and the functionality of the dyed silk were investigated. Before dyeing, the silk was pretreated with chitosan-acetic acid solution or chitosan acetic acid and illite blend solution. Thereafter, UV-Visible transmittance, color, fastness, antimicrobial activity, and the FIR emissivity were analyzed. As a result, the K/S value was higher in the samples that were not pre-treated or fermented. Regardless of fermentation, the lightfastness was not significantly different. The color fastness to washing was slightly better when the samples were pretreated with chitosan-acetic acid and illite, and then dyed with extracts fermented 5 days. In addition, all samples showed high antimicrobial activity of 99.9%, regardless of the fermentation. Far-infrared emissivity was confirmed to be slightly increased by the illite and chitosan-acetic acid solution treatment compared to the untreated sample.

• Textile Coloration and Finishing
• /
• v.18 no.1
• /
• pp.1-9
• /
• 2006

Treatment of PET fabrics with alkali, chitosan and Al-mordanting has been carried out and the role of the chitosan coating in the dyeing process was clarified. The pre-treatment was effectively evaluated differences in dyeing behavior between its treated and untreated PET fabrics using wood of Caesalpinia sappan. The pre-treated on PET fabrics has been examined by SEM and evidence for the presence of chitosan sought using a air permeability test. Similar colour fastness by computer color matching(CCM) obtained on both untreated and pre-treated PET fabrics. The pre-treated PET was found to be of a deeper hue to that of its dyed untreated PET and, despite of its better colour depth, the wash fastness of the pre-treated dyeing was comparable to that of its dyed untreated PR. The application of chitosan or mordanting reveled that pre-treatment imparted to the PET additional functional groups that were available for coordination with the Brazilin.

• Textile Coloration and Finishing
• /
• v.7 no.4
• /
• pp.87-96
• /
• 1995

Colorant concentrates are prepared by use of concentration method of colorants extracted from Sappan wood using met hanol. Dyeabilities and fastness properties of silk fabrics dyed with concentrate of Sappan wood are investigated.The results obtained are as follows; 1. The storage stability of colorant concentrate is poor as concentration is excess. 2. Because the colors of dyeings are different with mordants, aluminium acetate, copper acetate, chromium alum and tin chloride are used in order to obtain reddish color. 3. The optimum dyeing temperature and dyeing time are 6$0^{\circ}C$ and 60 min, respectively. 4. Dry cleaning fastness is very good, and light fastness and washing fastness are low. 5. The dyeing method is simple owing to usehess of colorant concentrate prepared without extraction of colorant every time.

• Fashion & Textile Research Journal
• /
• v.21 no.4
• /
• pp.509-514
• /
• 2019

Cotton fabrics were treated with gelatin to enhance dyeability and color strength when using Caesalpinia sappan dye. Gelatin was used as the protein and a pad-dry- cure method was used for the treatment process (2, 4, 6, 8, 10, 12, 14g/l concentration). Pretreated fabrics were mordanted with 10% alum. Fabrics were then dyed with freeze-dried sappan wood water extract powder form. Dyed samples were assessed in regards to dyeing behavior and color fastness. Comparing untreated and gelatin treated samples from the SEM images indicated that the Gelatin treatment (10g/l) resulted in an enhanced surface roughness that was relative to that of untreated cotton. Padding cotton with gelatin at 6g/l concentration afforded dyed fabrics with a 2 times increase in the K/S value over that of untreated fabrics. All dyed samples were red color with a significant enhancement in the sample color strength (K/S) being observed for pretreated samples. pH values favor dye absorption with pH 7 yielding the highest color strength. Dyeing at an elevated temperature resulted in a lower color strength and reddish-dull color. Longer dyeing times created greater color strengths for untreated and gelatin treated cotton. Increased dye concentrations resulted in higher K/S values for both gelatin treated and untreated cotton. As for color fastness, gelatin treated and untreated cotton fabrics dyed with sappan wood extract showed a relatively low rating in washing fastness (color change 1 rating), light fastness (1 rating), and rubbing fastness (wet:1-2, dry:3-4 rating).

• Archives of Pharmacal Research
• /
• v.23 no.4
• /
• pp.344-348
• /
• 2000

80% Aqueous MeOH extracts from the wood of Caesalpinia sappan, which showed remarkable anticonvulsant activity, were fractionated using EtOAc, n-BuOH, and $H_2$O. Among them, the EtOAc fraction significantly inhibited the activities of two GABA degradative enzymes, succinic semialdehyde dehydrogenase (SSADH) and succinic semialdehyde reductase (SSAR). Repeated column chromatographies for the fraction guided by activity test led to the isolation of the two active principal components. Their chemical structures were determined to be sappanchalcone and brazilin based on spectral data. The pure compounds, sappanchalcone (1) and brazilin (2), inactivated the SSAR activities in a dose dependent manner, whereas SSADH was inhibited partially by sappanchalcone and not by brazilin.

• Journal of the Korean Society of Industry Convergence
• /
• v.6 no.3
• /
• pp.247-252
• /
• 2003

This study is to research on two phase printing method by use of colorants extracted from sappan wood. As for the research, printing effect of printing paste, streaming time, optimal mordant concentration, change of surface color and colorfastness were measured. This experiment showed that modified starch were best on surface color among the modified starch, sodium-alginate, guar gum. And the surface color was best when the steaming time was 60 minutes, mordant concentration 8%(ow.f). And for colorfastness experiment, colorfastness to drycleaning was good, but colorfastness to light and colorfastness to washing showed no desirable result.

• Journal of the Korean Society of Costume
• /
• v.52 no.2
• /
• pp.91-101
• /
• 2002

In order to development of culture goods I made works with various color's silk fabrics dyed with water extract or methanol extract of plants. The Plants used for dyeing as dyeing material were indigo, safflower, amur cock tree, onion's Peel, citrus peel, mugwort, gromwell, sappan wood. Each of Plants were extracted by each of temperature and time. The mordants used for various color chanties are aluminium sulfate, cupric acetate mono hydrate, ferrous chloride. With fabrics of various color dyed like this I made works which give expression to an easy and natural image of the Korean nation of fabrics.