• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.3C
• /
• pp.93-102
• /
• 2011

Most experimental studies on soil liquefaction are related to clean sands. However, soils in the field or reclaimed grounds commonly contain some amounts of silt and clay rather than clean sand only. Many researchers investigated the effect of fine contents on liquefaction resistance and mainly used non-plastic fines such as silts. In this study, 10% of plastic fines with various plasticity index (PI) such as 8, 18, 50, and 377 were mixed with wet Nakdong River sand and then loose, medium, and dense specimens were prepared by undercompaction method. A series of undrained cyclic triaxial tests were carried out by applying three different cyclic stress ratios. As a result, the liquefaction resistance tended to decrease as a PI of fines in the specimens with equal fine content increased. On the other hand, the difference between loose specimens with low and high plasticity fines was not clearly observed in terms of liquefaction resistance. However, in the case of dense specimens, liquefaction resistance decreased up to 40% as a plasticity of fines increased.

• Economic and Environmental Geology
• /
• v.38 no.3 s.172
• /
• pp.319-334
• /
• 2005

Some of old fluvial sediments are originally composed of fine and silty-clay grains with sands or some of them have been segregated by weathering as a result of the influence of groundwater fluctuations. For this reason, some of old fluvial sediments are not suitable for using as fine aggregates. Furthermore, the old fluvial aggregates with comparatively good quality have been exploited for a long time and quality of most remainders have been significantly poor. Though many old fluvial aggregates do not satisfy the quality controls(QC) standards such as KS F2526 and KS F 2527, they must be utilized to various usage suitable far different quality categories. Thus, we try to make constant efforts to utilize aggregates of all qualities. This study shows that physical properties of old fluvial aggregates are both controlled by source rocks and also related to old fluvial environment.

• The Journal of Engineering Geology
• /
• v.23 no.3
• /
• pp.247-256
• /
• 2013

The carbonate sands of the Sabkha layer in the Middle East have very low shear strength. Therefore, instant settlement and time-dependent secondary settlement occur when inner voids are exposed, as in the case of particle crushing. We analyzed settlement of the Sabkha layer under a large-scale foundation by hydrotesting, and compared the field test results with the results of laboratory tests. With ongoing particle crushing, we observed the following stress-strain behaviors: strain-hardening (Sabkha GL-1.5 m), strain-perfect (Sabkha GL-7.0 m), and strain-softening (Sabkha GL-7.5 m). General shear failure occurred most frequently in dense sand and firm ground. Although the stress-strain behavior of Sabkha layer carbonate sand that of strain-softening, the particle crushing strength was low compared with the strain-hardening and strain-perfect behaviors. The stress-strain behaviors differ between carbonate sand and quartz sand. If the relative density of quartz sand is increased, the shear strength is also increased. Continuous secondary compression settlement occurred during the hydrotests, after the dissipation of porewater pressure. Particle crushing strength is relatively low in the Sabkha layer and its stress-strain behavior is strain-softening or strain-perfect. The particle crushing effect is dominant factor affecting foundation settlement in the Sabkha layer.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.12 no.1
• /
• pp.111-122
• /
• 2009

Abatements of TN and ${NO_3}^-$-N in a horizontal subsurface-flow wetland with litter layer on its surface were compared with those without one. The wetland was constructed in 2001 on floodplain of the Gwangju Stream which flows through Gwangju City in Korea. Its dimensions were 29m in length, 9m in width and 0.65m in depth. A bottom layer of 45cm was filled with crushed granites (15~40mm in diameter) and a middle layer of 10cm had pea pebbles. An upper layer of 5cm contained coarse sands. Reeds (Phragmites australis) growing in natural wetlands were transplanted on its surface. Water of the stream was channelled into the wetland by gravity flow and its effluent was discharged back into the stream. Average Litter layer of 12.2cm was formed on its surface in 2007. The layer and above-ground parts of reeds were eliminated in April 2008. Volumes and water quality of influent and effluent of the wetland were analyzed from May to November in 2007 and 2008, respectively. Inflow into the wetland both in 2007 and 2008 averaged approximately 40$m^3$/day and hydraulic residence time both in 2007 and 2008 was about 1.5days. Influent TN concentration in 2007 and 2008 averaged 3.96 and 3.89mg/L, respectively and average influent ${NO_3}^-$-N concentration in 2007 and 2008 was 2.11 and 2.05mg/L, respectively. With a 0.05 significance level, influent concentrations of TN and ${NO_3}^-$-N, temperatures and pH of effluent, and heights and stem numbers of reeds showed no difference between the wetland with litter layer and without one. TN retention in the wetland with litter layer and without one averaged 64,76 and 54.69%, respectively and ${NO_3}^-$-N removal averaged 60.83 and 50.61%, respectively. Both TN and ${NO_3}^-$-N abatement rates in the wetland with litter layer were significantly high (TN abatement: p<0,001, ${NO_3}^-$-N abatement: p=0.001) when compared with those without one. The subsurface-flow wetland having litter layer on its surface was more efficient for TN and ${NO_3}^-$-N removal.

• Korean Journal of Soil Science and Fertilizer
• /
• v.48 no.3
• /
• pp.194-204
• /
• 2015

Six study sites in Gumi, Goryeong in Gyeongbuk province and Naju in Jeonnam province were selected to investigate soil properties of poorly drained horizons in paddy soils. The horizons were re-established layers which were parent material layers originated from fluvial deposits. Topsoil layers were differentiated from piled parent materials while soil structure of the topsoil layer was massive with striated microstructure. Compaction at soil re-establishment and a lack of structure and aggregate development in these soils may cause the limitation of vertical water movement and result in poorly drained horizons. Soil samples were taken from paddy fields with top soils of sandy loam, silt loam and silty clay loam and re-established soils of coarse and fine texture. The samples were taken from each horizon for the analyses of soil chemical and mineral properties. Soils with re-established soils of coarse texture had greater amounts of sands from top soil texture distributions, while soils with fine texture had greater amounts of silts. Chemical properties of top soils were analyzed from rice cultivated soils at the time of re-establishments and one year after the re-establishments. The coarse texture of the re-established horizons decreased in EC values from 0.23 to $0.11(dS\;m^{-1})$, available phosphate values from 112 to $54(mg\;kg^{-1})$, and exchangeable Ca values from 6.6 to $4.9(cmol_c\;kg^{-1})$. On the other hand, soils with fine texture showed decrease only in pH and exchangeable Ca values. Especially, organic matter and available phosphate contents showed heterogeneous distributions from each horizon. This result may be caused by mixture of plough layer and subsurface layer during and consolidation. Hydraulic conductivity values were low at the boundaries of top soil and parent material layers except SL/coarse soil. Soil microstructure was massive structure without soil clods or pores and showed striated structure. Therefore, re-established paddy fields with fluvial deposits as parent material layers showed limited vertical movements of soil water because of occurrence of compacted layers and less-development of soil clods and aggregates.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.4 no.2
• /
• pp.107-116
• /
• 1999

To study the characters of surface sediment and to describe the seasonal depositional environment as a result of sedimentation process off Byun-San Peninsula, a total 61 samples of surface sediment (32 samples in summer; 29 samples in winter) were collected and analysed. A digitized depth data from sea chart and echosounding profiles along five trans-sections were helpful for understanding the morphological factors. The types classified by the characters of surface sediment are type I (sand, S), type II (silty sand, zS), and type ill (sandy silt, sZ). Mean grain size varies from 2.11 to 7.81 ${\Phi}$. The positive-skewness shows the typical tide-dominated environment. The sediment type of the northwestern stations is medium sand and the sorting value is 0.5~1.4 ${\Phi}$ of well/moderately sorted. Meanwhile, other stations are composed of muddy sands and sandy muds transported from rivers and offshore. These sediment types toward inshore change gradually from silty sand to sandy silt. According to the C/M diagram, there are three major transport modes of sediment: bed load (Mode A), graded suspension (Mode B), and suspension (Mode C), correlating with north-eastern sandy area, middle part of silty-sand area, and southern sandy-silt area, respectively. The result of Principal Component Analysis shows also similar pattern of sediment types. In result, sediment texture of type III tends to be finer and more poorly-sorted than that of type II and sediment facies are correlateed with sedimentation process.

• Economic and Environmental Geology
• /
• v.44 no.4
• /
• pp.303-312
• /
• 2011

Analysis of high-resolution seismic profiles from the southeastern continental shelf of Korea reveals that the Holocene transgressive deposits consist of five sedimentary units characterized by retrograding or backstepping depositional arrangements. Unit I, forming a linear sediment body along the shelf margin, is an ancient beach/shoreface deposit formed during the early stage of transgression. During the transgression, the paleo-channels were backfilled with fluvial or coastal-plain sediments, forming Unit II as an incised-channel fill deposit. The near-surface sediment was reworked and eroded by shoreface erosion, forming a thin lag of sands (Unit III) on the midshelf. During the middle stage of the transgression, the shoreline may have stabilized at around 70 - 80 m below the present sea level for some period of time to allow the formation of sand ridge systems (Unit IV). Unit V in the inner shelf was deposited in an estuarine environment during the middle to late stage of transgression. Such transgressive stratigraphic architecture is controlled by a function of lateral changes in the balance among rates of relative sea-level rise, sediment input and marine processes at any given time.

• Economic and Environmental Geology
• /
• v.41 no.2
• /
• pp.243-252
• /
• 2008

The Iho and Hamdeok beaches, the major coastal beaches in Jeju Island, have been studied through size analysis and using an experimental extension pole and sediment trap in beach profile, in order to understand their textural characteristics, migration patterns, and seasonal change in beach geometry. The Iho beach is composed of coarse and medium sands, 590 m in total length. The foreshore slope is 12.3$^{\circ}$ in summer and 10.8$^{\circ}$ in winter, which shows more steeper in summer. The Hamdeok beach consisting mostly of shell fragments is 950 m long, $5.7{\sim}7.4^{\circ}$ steep and 97.4${\sim}$114.5 m wide, respectively. The suspended load drift concentrations in the studied beaches showed 4.5 mg/l during the period of summer and 33.2 mg/l in winter, and those of fine-grained sediments are derived mostly from the marine of northeastward direction. The typical beach transformation of the Iho beach is resulting from the construction of jetties in the west side that built up the sand inside the jetties, whereas the erosion is occurring on the east side of beach. The center and berm sides of the sand in the Hamdeok beach drift into the dune side during the period of the stormy winter season.

• Applied Microscopy
• /
• v.36 no.4
• /
• pp.251-258
• /
• 2006

Crystal-bearing cells are rarely encountered in the softwoods and their regular occurrence, e.g., in species of Abies, Picea, Ginkgo, and Pinus, is of considerable diagnostic significance. Thus, this study discusses the distribution and types of crystals in North American Abies species to provide additional information for wood anatomy and identification through light and scanning electron microscopies. Prismatic crystals, elongate crystal s, and styloids are identified, in descending order of frequency, in Abies concolor, A. grandis. and A. magnifica, A. nobilis (=A. procera), A. lasiocarpa, and A. amabilis but not in A. balsamea and A. fraseri. Differently from the other species, A. lasiocarpa shows the tendency of more elongate crystals and styloids than prismatic crystals. A. concolor contains crystal sands, prismatic crystals, elongate crystals, and styloids both in the axial and ray parenchyma cells, whereas the other species show prismatic crystals, elongate crystals, and styloids only in the ray parenchyma cells. Ray parenchyma cells containing crystal sand and axial parenchyma cells having crystal sand, prismatic crystals, elongate crystals, and styloids are probably reported here for the first time in A. concolor. In conclusion, the presence or absence of crystals appears to be the most powerful diagnostic character for separating A. concolor, A. grandis, and A. magnifica from A. nobilis (=A. procera), A. lasiocarpa, A. amabilits, A. balsamea, and A. fraseri.

• Journal of the Korean Geotechnical Society
• /
• v.31 no.3
• /
• pp.51-62
• /
• 2015

Shear behavior obtained by direct shear tests is dependent on shear box and boundary condition. The objective of this study is to analyze problems of conventional direct shear test (type-A) and provide the reliable results by developing type-C direct shear apparatus. Experimental tests are carried out for Ulleung sand by using type-A and -C direct shear devices. The soil specimens, which are prepared at the relative density of 60%, and are applied to vertical confining stresses of 50, 100, 200, 300, and 400 kPa, are sheared at a constant shear strain rate of 0.5 mm/min. By comparing the results obtained by type-A and -C direct shear apparatus under constant normal load (CNL) condition, the performance of new one is verified. In addition, two constrained conditions including constant normal load (CNL) and constant pressure (CP) are applied to type-C one. Experimental results show that type-A direct shear apparatus has some problems such as rotating of loading plate and upper shear box, and the frictional forces between soil and inner wall of upper shear box. Thus, the shear strengths obtained by type-A device are overestimated or underestimated depending on shear box and boundary condition. On the other hand, type-C device produces clear and consistent test results regardless of constrained conditions. This study represents that type-C direct shear apparatus not only can solve the problems of type-A direct shear apparatus but provide the reliable results.