• Journal of the Korean Home Economics Association
• /
• v.48 no.3
• /
• pp.55-69
• /
• 2010

A college student who exhibited several post traumatic stress disorder (PTSD) symptoms was used as a case study in order to investigate the therapeutic effects of sandplay therapy for PTSD sufferers. In total, 27 sessions of the sandplay treatment program were used to conduct psychological tests before and after the sessions. Any changes in the manner of expressions on the sand box during the treatment, and the results of pre and post psychological tests on aspects of depression, anxiety and interrelationships were analyzed. Overall results showed that the subject exhibited progressive behavioral improvement and signs of recovery. Psychological tests revealed reduced levels of depression and anxiety, and improved interrelationship scores. In conclusion, sandplay therapy does exhibit positive benefits as an effective treatment modality for PTSD in adolescents and young adults.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2022.07a
• /
• pp.611-612
• /
• 2022

메타버스는 게임 기술을 활용하여 현실의 다양한 현상이나 경제 활동들을 가상의 세계로 구현하고 이를 실세계와 유사하게 동작하도록 다양한 서비스를 제공하는 플랫폼을 일컫는 말로서 최근의 코로나19 펜데믹 상황과 맞물려 주목 받고 있는 게임 확장 기술군의 하나라 할 수 있다. 본 논문에서는 지역 관광 활성화를 위해 지역 대표 관광지의 시그니처(signature) 구조물들과 공간을 메타버스 플랫폼 상에 구현하고 구현된 공간에서 사용자간의 커뮤니케이션을 통해 관광 수요를 촉진시키며, 오프라인 이벤트와의 유기적인 연동을 통해 궁극적인 관광 활성화에 기여하기 위한 온오프라인 연계 메타버스 콘텐츠를 구현한다. 구현된 메타버스 콘텐츠에서는 개인별로 설정된 캐릭터를 활용해 구현된 가상 공간에서 상호작용이 가능하도록 구성하여 가상 공간에서 체득된 정보를 온라인 상에서 자유롭게 교환할 수 있도록 하였다. 본 논문에서 구현된 관광 메타버스 콘텐츠는 샌드박스형 메타버스 플랫홈으로 개발된 디토랜드를 기반으로 한다.

• Journal of Soil and Groundwater Environment
• /
• v.6 no.4
• /
• pp.51-59
• /
• 2001

Column and box tests were performed to investigate the removal efficiency of NAPL using the surfactant enhanced flushing In heterogeneous medium. Homogeneous Ottawa sand and heterogeneous soil were used to verify the increase of remediation efficiency for the surfactant enhanced flushing in column test. Box tests with two different heterogeneous sub-structure were performed to quantify the capability of the surfactant enhanced flushing as a remediation method to remove NAPL from the heterogeneous medium. Two different grain size sand layers were repeated in the box to simulate the heterogeneous layer formation and the modified fault structure was built to simulate the fault system in the box. O-xylene as a LNAPL and PCE as a DNAPL were used and oleamide as a non-ionic surfactant. The maximum NAPL effluent concentration with 1% oleamide flushing in the homogeneous column test increased about 460 times compared to that with only water flushing and about 250 times increased in the real soil column test. In heterogeneous medium, the maximum effluent concentration increased about 150 times in 1% oleamide flushing and most of NAPL were removed from the box within 8 pore volume flushing, suggesting that the removal efficiency increased very much compared to in only water flushing. Results investigated the capability of the surfactant enhanced remediation method to remove NAPL even in heterogeneous medium.

• Journal of Korean Society of Environmental Engineers
• /
• v.27 no.9
• /
• pp.995-1005
• /
• 2005

The study with laboratory sandbox model has been carried out to address potential use of reclaimed water, as a countermeasure artificially recharging the coastal aquifer, to effectively prevent from seawater intrusion due to overexploitation. It also investigated plausibility for either preserving or recovering the freshwater interface facing with seawater intrusion. To do this, we assessed hydraulic properties in artificial aquifer seawater/freshwater interface) depending upon the variation of extraction, storage and injection of reclaimed water. The variation of interface between freshwater and seawater were visualized by Surfer 8(Golden Software, USA) according to given experimental conditions. The interface between seawater and freshwater has been sensitively influenced by the change of extraction rate, where seawater zone migrated much faster into freshwater zone even though extraction rate became decreased. However, decreasing recharge rate could slow down moving of saline water zone toward freshwater zone. When the recharge was solely introduced into the sand box model, saline water intrusion was retarded than those of recharge and extraction working together. And also, the level of salinity of saline water was diluted by artificial recharge. It finally revealed that the artificial recharge would hydraulically avoid seawater intrusion while the freshwater sources could be conservatively utilized.

• Journal of Sericultural and Entomological Science
• /
• v.28 no.2
• /
• pp.9-14
• /
• 1986

The rootability of hardwood cutting of mulberry (Morus alba L.) depending upon the kinds of cutting beds, soil of cutting beds, effect of growth regulator (Rootone-F), pretreatments of cutting scion, parts of branches were investigated, The results were as follows ; 1. Rootability was the highest in cutting after callus formed on sand bed, whereas null in the treatment of rice seedling hot bed. 2. Optimum cutting season was around March 26, showed 100% rootability in all treatments except wooden box filled with sand. 3. The order of rootability related with cutting part of branch was upper$^{\circ}C$), and cutting after formation of callus increased rootability, whereas cuttings left in open air for 5 days showed null rootability.

• Geomechanics and Engineering
• /
• v.3 no.4
• /
• pp.291-321
• /
• 2011

The paper describes a simple numerical FLAC model that was developed to simulate the dynamic response of two instrumented reduced-scale model reinforced soil walls constructed on a 1-g shaking table. The models were 1 m high by 1.4 m wide by 2.4 m long and were constructed with a uniform size sand backfill, a polymeric geogrid reinforcement material with appropriately scaled stiffness, and a structural full-height rigid panel facing. The wall toe was constructed to simulate a perfectly hinged toe (i.e. toe allowed to rotate only) in one model and an idealized sliding toe (i.e. toe allowed to rotate and slide horizontally) in the other. Physical and numerical models were subjected to the same stepped amplitude sinusoidal base acceleration record. The material properties of the component materials (e.g. backfill and reinforcement) were determined from independent laboratory testing (reinforcement) and by back-fitting results of a numerical FLAC model for direct shear box testing to the corresponding physical test results. A simple elastic-plastic model with Mohr-Coulomb failure criterion for the sand was judged to give satisfactory agreement with measured wall results. The numerical results are also compared to closed-form solutions for reinforcement loads. In most cases predicted and closed-form solutions fall within the accuracy of measured loads based on ${\pm}1$ standard deviation applied to physical measurements. The paper summarizes important lessons learned and implications to the seismic design and performance of geosynthetic reinforced soil walls.

• Geomechanics and Engineering
• /
• v.28 no.5
• /
• pp.521-529
• /
• 2022

This research work deals with the development of air pluviation method for preparing uniform sand specimens for conducting large scale laboratory testing. Simulating real field conditions and to get reliable results, air pluviation method is highly desirable. This paper presents a special technique called air pluviation or sand raining technique for achieving uniform relative density. The apparatus is accompanied by a hopper, shutters with different orifice sizes and numbers and set of sieves. Before using this apparatus, calibration curves are drawn for relative density against different height of fall (H) and shutter sizes. From these calibration curves, corresponding to the desired relative density of 60%, the shutter size of 13mm and height of fall of 457.2 mm, are selected and maintained throughout the pluviation process. The density obtained from the mobile pluviator is then verified using the Dynamic Cone Penetrometer (DCP) test where the soil is poured in the box using defined shutter size and fall height. The results obtained from the DCP test are averaged as 60±0.5 which was desirable. The mobile pluviator used in this research is also capable of obtaining relative densities up to 90%. The instrument is validated using experimental and numerical approach. In numerical study, Plaxis 3D software is used in which the soil mass is defined by 10-Node tetrahedral elements and 6-Node plate is used to simulate plate behavior in the validation phase. The results obtained from numerical approach were compared with that of experimental one which showed very close correlation.

• Journal of the Korean Geotechnical Society
• /
• v.35 no.11
• /
• pp.63-74
• /
• 2019

Numerical liquefaction model and response history analysis procedure are verified based on dynamic centrifuge test results. The test was a part of the Liquefaction Experiments Analysis Project (LEAP). The model ground was formed inside of rigid box by using the submerged Ottawa F65 sand with a relative density of 55% and 5° of surface inclination. A tapered sinusoidal wave with a frequency of 1 Hz was applied to the base of the model box. Numerical analyses were performed by two dimensional finite difference method in prototype scale. The soil is modeled to show hysteretic behavior before shear failure, and Mohr-Coulomb model is applied for shear failure criterion. Byrne's liquefaction model was applied to track the changes in pore pressure due to cyclic loading after static equilibrium. In order to find an appropriate flow condition for the liquefaction analysis, numerical analyses were performed both in drained and undrained condition. The numerical analyses performed under the undrained condition showed good agreement with the centrifuge test results.

• Structural Engineering and Mechanics
• /
• v.33 no.4
• /
• pp.503-527
• /
• 2009

This paper presents experimental results on the behaviour and ultimate load of fifteen pipes and six roof panels made of ferrocement. Additional results from three roof panels, carried out by others, are also compared with this research results. OPC cement, natural sand and galvanised iron wire mesh were used for the construction of 20 mm thick specimens. The pipe length was 2 m and roof panel length was 2.1 m. The main variables studied were the number of wire mesh layers which were 1, 2, 3, 4 and 6 layers, the inner pipe diameter which were 105, 210 and 315 mm, cross sectional shape of the panel which were channel and box sections and the depth of the edge beam which were 95 mm and 50 mm. All specimens were simply supported and tested for pure bending with test span of 600 mm at mid-span. Tests revealed that increasing the number of wire mesh layers increases the flexural strength and stiffness. Increasing the pipe diameter or depth of edge beam of the panel increases the cracking and ultimate moments. The change in the pipe diameter led to larger effect on ultimate moment than the effect of change in the number of wire mesh layers. The box section showed behaviour and strength similar to that of the channel with same depth and number of wire mesh layers.

• Journal of the Korean Geotechnical Society
• /
• v.27 no.10
• /
• pp.13-23
• /
• 2011

Bearing capacity of pile foundations in cold region is dominated by adfreeze bond strength between surrounding soil and pile perimeter. It denotes that adfreeze bond strength is the most important design parameter for foundations in cold region. Adfreeze bond strength is affected by various factors like 'soil type', 'frozen temperature', 'normal stress acting on soil/pile interface', 'loading rate', 'roughness of pile surface', etc. Several methods have already been proposed to estimate adfreeze bond strength during past 50 years. However, most methods have not considered the effect of normal stress for adfreeze bond strength. In this study, both freezing temperature and normal stress have been controlled as primary factors affecting adfreeze bond strength. A direct shear box was used to measure adfreeze bond strength between sand and aluminum under different temperature conditions. Based on the test results, the relation between shear strength of frozen sand and adfreeze bond strength have been investigated. The test results showed that both of shear strength and adfreeze bond strength tend to increase with decreasing frozen temperature or increasing confining pressure. The ratio of shear strength and adfreeze bond strength, expressed as $r_s$, decreased initially frozen section but increased at much lower frozen temperature and there were uniform intervals under the different normal stress conditions. A method for predicting adfreeze bond strength using $r_s$ has finally been proposed in this study.