• Geophysics and Geophysical Exploration
• /
• v.15 no.1
• /
• pp.1-7
• /
• 2012

To evaluate methods of determining near-surface shear-wave velocities (${\nu}_s$), we derived dispersion curves of Rayleigh waves generated by both passive and active sources in Chuncheon, Korea. Microtremors were recorded for 5 minutes in each of four triangular arrays with radii of 5 ~ 40 m. Those data were analyzed using the Spatial Autocorrelation method. Rayleigh waves were also generated by a hammer source and recorded in the same area for 2 s using 24 4.5-Hz geophones. Multichannel Analysis of Surface Waves was applied to those data. Velocity spectra were derived with relatively high signal-to-noise ratios in the frequency ranges of 7 ~ 19 and 11 ~ 50 Hz for the microtremors and synthetically generated Rayleigh waves, respectively. The resultant dispersion curves were combined as one and then input to inversion to derive shear wave velocities that were compared with a lithology log from a nearby well. Shearwave velocities in the top soil and soft-rock layers are almost constant with values of 221 and 846 m/s, respectively; while the inverse-modeled ${\nu}_s$ increases linearly in the gravelly sand, cobbles, and weathered-rock layers. If rock type is classified based on shear-wave velocity, the inversion-derived boundary between weathered-rock and soft rock may be about 5 m deeper than in the well log.

• Journal of the Korean Geosynthetics Society
• /
• v.16 no.2
• /
• pp.149-158
• /
• 2017

Permeating injection is commonly known as an ideal type of injection in grouting reservoir embankment, yet often-combined permeating and fracturing injection grouting operation can disturb the original soil. A grouting method has been regarded as effective and developed to ameliorate the possible disturbance problem. It involves compaction grouting with low expansive pressure near the injection hole and repetitive injection and compaction with grout material that allows ideal permeating injection. This thesis develops Hybrid Grout (ie. HG grout) that allows various application in any ground condition combined together, has high fineness and low viscosity, and expands permeation injection to silty sand. It researches on the injection effect of permeable compaction grout which is done with PC packer and is a combination of HG grout and expansion agent to obtain permeation compaction effect on the area near grout injection spot by developing Permeable Compaction Type Packer(ie. PC packer). As the developed PC packer, HG grout, and and expansion agent (HI-E) are applied to reservoir embankment reinforcement grouting, possibile permeation compaction effect that satisfies reservoir embankment grouting standard is confirmed according to the research.

• Journal of the Korean Geotechnical Society
• /
• v.18 no.5
• /
• pp.37-42
• /
• 2002

Artificial neural networks are efficient computing techniques that are widely used to solve complex problems in many fields. In this paper a liquefaction potential was estimated by using a back propagation neural network model applicated to cyclic triaxial test data, soil parameters and site investigation data. Training and testing of the network were based on a database of 43 cyclic triaxial test data from 00 sites. The neural networks are trained by modifying the weights of the neurons in response to the errors between the actual output values and the target output value. Training was done iteratively until the average sum squared errors over all the training patterns were minimized. This generally occurred after about 15,000 cycles of training. The accuracy from 72% to 98% was shown for the model equipped with two hidden layers and ten input variables. Important effective input variables have been identified as the NOC,$D_10$ and (N$_1$)$_60$. The study showed that the neural network model predicted a CSR(Cyclic shear stress Ratio) of silty-sand reasonably well. Analyzed results indicate that the neural-network model is more reliable than simplified method using N value of SPT.

• Journal of Environmental Science International
• /
• v.12 no.11
• /
• pp.1181-1187
• /
• 2003

Hibiscus hamabo, called "Hwang-geun", growing about 3m in height is a deciduous shrub or subtree of Malvaceae. Because the number of these species is very limited in the world, the Ministry of Environment has designated H. hamabo as a preserved plant. The Korea Forest Service also protects it strictly by law since H. hamabo is an out-of-the-way plant and possibly may be exterminated soon in Korea. Investigation for distribution and ecological characteristics of the habitat for H. hamabo was carried out on Soan Island. Two wild H. hamabo were found at the forest edge (equation omitted) along the sea coast located in the southern part of Soan Island and this was the first report in the Korean academic world. These two wild H. hamabos were growing in a naturally inhibited area. The diameters at the base were 12cm and 15cm. The Tree heights were 150cm and 210cm and the number of branches of each wild H. hamabo was 4 and 7. However, the present condition of these plants was not good. Environmental conditions of the naturally inhibited area of H. hamabo were very mild because it is located at the edge of the forest and is always sunny during the daytime since the slope of the inhibited area is facing South. The ground drained very well since the soil was made of gravels and sand. Because the percent of vegetation of the subtree layer where H. hamabo was growing was 40%, the cover degree and sociability of flex crenata trees and Eurya japonica were found to be high. In the naturally inhibited area of H. hamabo, a dominant value of Rubus parvifolius in the lower part of the herb layer was very high and many plants in Compositae, such as Artemisia princeps var. orientalis and Erigeron annuus, were also present. A dominant value of liana, such as Vitis thunbergii var. sinuata, Rosa multiflora, Clematis terniflora and Hedera rhombea, and Gramineae plants that rhizomes were well developed and aggressively propagated, such as Miscanthus sinensis var. purpurascens, Phragmites communis, Spodiopogon cotulifer and Oplismenus undulatifolius which were surveyed as high, too. These results imply that H. hamabo might be exterminated soon through a natural selection if the proper management of the naturally inhibited area of H. hamabo is not conducted continually.

• Journal of the Korean GEO-environmental Society
• /
• v.11 no.6
• /
• pp.57-67
• /
• 2010

Specific yield is an essential parameter of the water table fluctuation method for recharge calculation. Specific yield is not easily estimated because of limited availability of aquifer test data and soil samples at National Groundwater Monitoring Stations in South Korea. The linear relationship between rainfall and water level rise was used to estimate the specific yields of aquifer for 34 shallow monitoring wells which were grouped into three clusters. In the case of Cluster-1 and Cluster-2, this method was not applicable because of low cross correlation between rainfall and water level rise and also a long lag time of water level rise to rainfall. However, the specific yields for 19 monitoring wells belonging to Cluster-3, which have relatively high cross correlation and short lag time, within 2 days after rainfall, range from 0.06 to 0.27 with mean value of 0.17. These values are within the general range for sand and gravel sediments and similar to those from aquifer test data. A detailed field survey is required to identify monitoring sites that are not greatly affected by pumping, stream flow, evapotranspiration, or delayed response of water levels to rainfall, because these factors may cause overestimation of specific yield estimates.

• The Korean Journal of Quaternary Research
• /
• v.20 no.1 s.26
• /
• pp.39-50
• /
• 2006

Jeonjangri site of Geochang area is located in the Geochang Basin, and lies on the river terrace of upstream part of Hwang River. Fluvial deposits are well distributed at the northern and southern walls of trench 2(district 2) in the Jeonjangri archeological site. This study aims to interpret the occurrences of fluvial sedimentary deposits on the basis of grain size analysis and palynological analysis in the representative sections of Jeongjangri site. The sedimentary profile shows that the upper units are typified by paleosols with soil wedge formed at about $25,000{\sim}30,000yr$ B.P, and the lower units are characterized by reddish brown muddy sands, organic muds and sand/gravel downwards in the profile. Particularly palynological study on the organic muds of southern wall section showed a result that lower unit is dominant with grass vegetation, and upper unit with Alnus-Quercus-Pinus vegetation. The former is interpreted to be formed at $60,000{\sim}50,000yr$ B.P (stadial), while the latter at $80,000{\sim}70,000yr$ B.P. In general broad-leaved/coniferous mixed forests are mostly dominant in Jeongjangri site and the climate was presumed to be cool temperate at that time.

• Korean Journal of Plant Tissue Culture
• /
• v.28 no.2
• /
• pp.103-108
• /
• 2001

The in vitro plantlets of cassava (Manihot esculenta Crantz cv. MColl 22) could be regenerated from nodal explant cultures in a liquid MS basal medium containing 0.01 mg/L zeatin for 2 weeks. The plantlets of 1.5∼2.5 cm in shoot length were transplanted to a glass bottle containing fine sand and acclimated under non-sterile conditions after excising their intact roots by: 1) prune leaving roots base of 1∼1.5 cm; 2) complete removal of roots; and 3) cutting off the rooting zone. The majority of in vitro-formed intact roots continued growth after transferred to soil, and all of the damaged roots stopped further growth. The plantlets with excised roots began to develop new roots within 7∼10 days after being transferred to a glass bottle, and a few of the pruned roots developed lateral roots from the remaining portion. Pruning and removal of in vitro roots resulted in a high survival rate (>87%), and did not significantly affect ex vitro root regeneration and acclimation, but the plantlets in which the rooting zone had been cut-off showed 73% survival rate. Pruning or removal of in vitro roots before transfer of plantlets is recommended for useful method of commercial micropropagation because of easier handling and high survival rate of plantlets.

• Journal of agriculture & life science
• /
• v.46 no.2
• /
• pp.35-42
• /
• 2012

This study was conducted to investigate growth responses at 45 days after cutting in six Sedum cultivars (S. reflexum 'Blue Spruce', S. rupestre 'Angelina', S. sexangulare, S. sexangulare var. elatum, S. spurium 'Atropurpureus', S. takesimense) using vegetation mats (individual coir tape and jute treated with different thicknesses and soil compositions) to broaden usefulness of evergreen Sedum cultivars. All the treatments including both single and interaction between treatments showed significant effects (p<0.001) on the number of branches, plant height, and shoot fresh weight except the number of branches treated with different mat types. No. of branches was showed two times in compost than in sand regardless of cultivars and mat types with the exception of S. takesimense showing no added branches in all treatments. Each plant height of all the cultivars except 'Angelina' showed the highest value under the conditions treated with 5 mm thick coir tape using compost. The fresh weight of 'Blue Spruce' treated with 5 mm thick coir tape using compost was 13.19 g of which value was the highest in all treatments. The better growth response in all Sedum cultivars was shown in the treatment of 5 mm thick coir tape than with jute net treatment.

• Journal of the Korean Geotechnical Society
• /
• v.34 no.11
• /
• pp.57-70
• /
• 2018

In this study, verification of the nonlinear effective stress analysis is performed for introducing performance based earthquake resistance design of port and harbor structures. Seismic response of gravitational caisson quay wall in numerical analysis is compared directly with dynamic centrifuge test results in prototype scale. Inside of the rigid box, model of the gravitational quay wall is placed above the saturated sand layer which can show the increase of excess pore water pressure. The model represents caisson quay wall with a height of 10 m, width of 6 m under centrifugal acceleration of 60 g. The numerical model is made in the same dimension with the prototype scale of the test in two dimensional plane strain condition. Byrne's liquefaction model is adopted together with a nonlinear constitutive model. Interface element is used for sliding and tensional separation between quay wall and the adjacent soils. Verification results show good agreement for permanent displacement of the quay wall, horizontal acceleration at quay wall and soil layer, and excess pore water pressure increment beneath the quay wall foundation.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.9
• /
• pp.20-28
• /
• 2019

This study comparatively analyzes general walking shoes on the conical top foundation of the ground condition and the pressure distribution during walking with shoes that are currently under development. Two categories of footwear were used: general footwear and a footwear conical top foundation that is currently under development. Experiments were carried out on hard ground and sandy soil in 15 male twenties that satisfy the conditions of normal foot wearing 260 mm. The pressure during walking was measured using Techstorm's Wireless Insole System, and foot pressure was measured in 7 zones of the foot. Studies have shown different maximum forces, average pressures, and pressure distributions depending on the shoe and ground conditions. This study shows that shoes with general low pressure dispersion effects depending on the feet in hard ground and sand ground are different from shoes with the conical top foundation that is currently under development. It is expected that it will be useful for the development of shoes that can be worn in all hard ground and sandy ground by selecting various rubber materials through further research.