• Journal of Korean Society of Forest Science
• /
• v.46 no.1
• /
• pp.29-43
• /
• 1980

The sampling methods selected for this area was (1) Simple random sampling (2) Systematic sampling and (3) Sub-sampling. For the calculation of the number of sampling plot, 10 % coefficient of variation was adapted. As a result, 57 plots each for simple random sampling and systematic sampling was calculated. In the sub-sampling method, however, total of 40 plots, which were consisted of 5 Blocks, secondary 4 major units and tertiary 2 minor units, were examined. The reuslts obtained are summarized as follows : 1. The rate of expected error was 9.24% for simple random sampling, 8.36% for systematic sampling and 7.54% for sub-sampling, respectively. Therefore, the sub-sampling was proved to be the most accurate method among the test. 2. The volume calculated by each sampling method was compared to the volume of all stand. The rate of expected error was also lowest in the sub-sampling (0.39%), followed by systematic sampling (4.18%) and simple random sampling (7.92%). 3. Comparing the various reuslts and analysis of these results, the sub-sampling was regarded as the most rapid and economical method because this method had not only the least number of plots but also the least expected error among the tested sampling methods Therefore the sub-sampling is proved to be an ideal sampling method for forest survey.

• Journal of the Korean Society of School Health
• /
• v.17 no.1
• /
• pp.85-95
• /
• 2004

Objectives : The aim of this study was to identify the trend of school health research by analyzing articles related to school health for the last 10 years. this information can be used to guide research direction for the future. Methods : This study is a descriptive study that analyzed annual data. using an objective frame of evaluation about the methodology and research domain in each paper, all the papers included in the journals concerning school health from January 1993 to December 2000 were analyzed. The data was processed statistically by frequency and percentage. Results : 455 papers in 9 journals related to school health were published. The Journal of the Korean Society of School Health had 204 articles, the highest number of any journal. most of the articles were descriptive, but the number of experimental studies increased over time. the most common research subjects were students were the greatest ones, but the trend to study both parents and teachers increased near the end of the sampling period. the most common selection of subjects appeared to be based on convenience, but probability sampling gradually increasing annually. the most common research instrument was the questionnaire and the reliability and the validity of instruments were described in approximately half of the studies. The survey was the most commonly used method of data collection. The papers that met ethical issue in data collection were less than those that did not. In addition, the papers that provided the rationale for the calculation of sample size were less than those that did not. parametric statistics were the main methods of data analysis, but some advanced statistics were used more often than simple descriptive statistics in the latter part of the sampling period. In general, limit of the studies were not frequently mentioned but more recommendations were made. regarding the characteristics of the research area, the assesment domain was remarkable. The rate of school health problem assesment was the highest among research subjects. Sex- related subjects were the highest in detail research subjects. Conclusions : The research of school health has increased quantitatively, but it is difficult to ascertain its qualitative development. Therefore, on the basis of the research completed up until now, more school-based intervention studies and longitudinal studies need to be another target for the evaluation of the effects of the school health service. as well, policy suggestion through international and cross-sectional comparison studies are needed to assist in the establishment of the long term direction of school health.

• Korean Journal of Environmental Biology
• /
• v.39 no.4
• /
• pp.526-535
• /
• 2021

Spatial sampling design plays an important role in GIS-based modeling studies because it increases modeling efficiency while reducing the cost of sampling. In the field of agricultural systems, research demand for high-resolution spatial databased modeling to predict and evaluate climate change impacts is growing rapidly. Accordingly, the need and importance of spatial sampling design are increasing. The purpose of this study was to design spatial sampling of paddy fields (11,386 grids with 1 km spatial resolution) in Korea for use in agricultural spatial modeling. A stratified random sampling design was developed and applied in 2030s, 2050s, and 2080s under two RCP scenarios of 4.5 and 8.5. Twenty-five weather and four soil characteristics were used as stratification variables. Stratification and sample allocation were optimized to ensure minimum sample size under given precision constraints for 16 target variables such as crop yield, greenhouse gas emission, and pest distribution. Precision and accuracy of the sampling were evaluated through sampling simulations based on coefficient of variation (CV) and relative bias, respectively. As a result, the paddy field could be optimized in the range of 5 to 21 strata and 46 to 69 samples. Evaluation results showed that target variables were within precision constraints (CV<0.05 except for crop yield) with low bias values (below 3%). These results can contribute to reducing sampling cost and computation time while having high predictive power. It is expected to be widely used as a representative sample grid in various agriculture spatial modeling studies.

• Journal of Educational Research in Mathematics
• /
• v.15 no.2
• /
• pp.177-196
• /
• 2005

In the Korean curriculum, students learn the concept of sample, sampling and other concepts related to sample and sampling, when they have reached the 10th grade of high school. But before the 10th grade, they have an activity about data collection, data analysis and the formulation of conclusion. We then investigated and analyzed the informal knowledge of students before they receive formal instructions. The results enabled the identification of the maximum response rate for each question that each student agreed or disagreed with. In particular, it didn't agree with how students consider the characteristic of population in the process of sampling, and the students agreed on a sampling process without considering the characteristic of the population or the components that consist the population. It showed that 5th grade students didn't investigate the data connected with sampling, and didn't understand the validity of sample survey process. While, 6th grade students equally understood sample size, sampling process, the reliance of data acquired through sample survey that applied to the source of judgment. But in details, it revealed that student had a misconception, or stayed at a subjective judgment level. The significant point is that many high school students didn't adequately understood a sample size with sampling. Though statistics instruction has traditionally been delayed until upper secondary education, this inquiry convinced us that this delay is unnecessary.

• Proceedings of the Korean Statistical Society Conference
• /
• 2003.10a
• /
• pp.253-256
• /
• 2003

In ecological studies, animal science, or entomology, the variance of count is considered to have the power of the mean relationship with the mean count as Taylor (1961) presented his famous 'Taylor's Power Law'. In this talk, we are going to review the development of TPL and its extension toward pest management sampling scheme. Different estimation methods are compared. Quasilikelihood approach is suggested to incorporate covariate information. Possible extensions will be discussed.

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2000.04a
• /
• pp.221-223
• /
• 2000

Cyclones are among the oldest types of industrial particulate control equipment and air sampling device. Until now, a great number of experimental studies have been performed on cyclones. In these studies, almost all of the eight cyclone dimensions were varied and Changes in cyclone performance produced by these variations were studied. However, very little information is available on the effects of the cone bottom diameter. (omitted)

• School Mathematics
• /
• v.16 no.3
• /
• pp.503-518
• /
• 2014

This study examines fourth graders engaged in three concrete activities involving sampling from finite populations. The first included a survey of popular foods for school meals. The second had them take samples from a box containing white and black marbles to predict how many white and black marbles were in the box. The final activity required them to predict how many times the Korean letter '가' would appear in a Korean story book. The results show that the participants can experience and notice different ideas related to samples and sampling in different activities. In the first activity, they acknowledged that samples are useful for obtaining the information about populations. A population survey is difficult and is not overly useful. In the second activity, they recognized that samples cannot be identical to their population but that the information from a group of samples is similar to the information of the population. In the last activity, they devised some ideas about random sampling even though the ideas were immature.

• Advances in aircraft and spacecraft science
• /
• v.6 no.6
• /
• pp.529-550
• /
• 2019

The effect of multiple process parameters on a set of continuous response variables is, especially in experimental designs, difficult and intricate to determine. Due to the complexity in aeroacoustic and vibroacoustic studies, the often-performed simple one-factor-at-a-time method turns out to be the least effective approach. In contrast, the statistical Design of Experiments is a technique used with the objective to maximize the obtained information while keeping the experimental effort at a minimum. The presented work aims at giving insights on Design of Experiments applied to aeroacoustic and vibroacoustic problems while comparing different experimental designs and approximation models. For this purpose, an experimental rig of a ducted low-pressure fan is developed that allows gathering data of both, aerodynamic and aeroacoustic nature while analysing three independent process parameters. The experimental designs used to sample the design space are a Central Composite design and a Box-Behnken design, both used to model a response surface regression, and Latin Hypercube sampling to model an Artificial Neural network. The results indicate that Latin Hypercube sampling extracts information that is more diverse and, in combination with an Artificial Neural network, outperforms the quadratic response surface regressions. It is shown that the Latin Hypercube sampling, initially developed for computer-aided experiments, can also be used as an experimental design. To further increase the benefit of the presented approach, spectral information of every experimental test point is extracted and Artificial Neural networks are chosen for modelling the spectral information since they show to be the most universal approximators.

• Asian Pacific Journal of Cancer Prevention
• /
• v.16 no.12
• /
• pp.4971-4975
• /
• 2015

Background: Several methods have been presented for the evaluation of the endometrium in patients with abnormal uterine bleeding, which include minimal invasive and invasive approaches such as diagnostic curettage or endometrial biopsy by Pipelle. Many studies have been performed in order to compare two methods; diagnostic curettage and outpatient endometrial biopsy. This investigation compared sampling adequacy, endometrial histopathology, failure rates, duration and costs between diagnostic curettage in a hospital and endometrial biopsy. Materials and Methods: This single blind clinical trial was performed on 130 patients older than 35 years who was referred to Amir training hospital in 2013 for elective diagnostic curettage because of abnormal uterine bleeding. For all patients eligible for the study, an endometrial sample by Pipelle was taken without anesthesia or dilatation. Then under general anesthesia diagnostic curettage was performed by sharp curette. Sampling duration was calculated and both samples were sent to the same pathologist. The diagnostic values of two methods in the diagnosis of normal endometrium, endometrial hyperplasia and carcinoma were compared. The costs of these two methods were also compared. Data analysis was performed by SPSS (version 16.0) software. Chi-Square, Fisher, and Pearson tests were used and were considered statistically significant at P values less than 0.05. Results: Two methods were agreed upon 88% of sampling adequacy and 94% of pathological results. Specificity of 100% and sensitivity of 90% for detection of proliferative endometrium, secretory endometrium, simple hyperplasia without atypia and 100% for cancer were recorded. Pipelle diagnostic accuracy in comparison with curettage, have been reported over 97%, so the failure rate in this study was below 5%. Sensitivity of Pipelle for detection of atrophic endometrium was reported below 50%. Duration and cost was lower in Pipelle versus curettage. Conclusions: It is concluded that due to high agreement and cohesion coefficient between curettage and Pipelle on the issue of sampling adequacy, histopathology finding (except atrophic endometrium), low failure rate, duration of sampling and cost, Pipelle can be introduced as a suitable alternative of diagnostic curettage.

• Ocean and Polar Research
• /
• v.38 no.4
• /
• pp.339-345
• /
• 2016

Stable water vapor isotopes have been utilized as a tracer for studying atmospheric global circulations, climate change and paleoclimate with ice cores. Recently, since laser spectroscopy has been available, water vapor isotopes can be measured more precisely and continuously. Studies of water vapor isotopes have been conducted over the world, but it is the early stage in south Korea. For vapor isotopes study, a cryogenic sampling device for water vapor isotopes has been developed. The cryogenic sampling device consists of the dewar bottle, filled with extremely low temperature material and impinger connected with a vacuum pump. Impinger stays put in the dewar bottle to change the water vapor which passes through the inside of impinger into the solid phase as ice. The fact that water vapor has not sampled completely leads to isotopic fractionation in the impinger. To minimize the isotopic fractionation during sampling water vapor, we have tested the method using a serial connection with two sets of impinger device in the laboratory. We trapped 98.02% of water vapor in the first trap and the isotopic difference of the trapped water vapor between two impinger were about 20‰ and 6‰ for hydrogen and oxygen, respectively. Considering the amount of water vapor trapped in each impinger, the isotopic differences for hydrogen and oxygen were 0.33‰ and 0.06‰, respectively, which is significantly smaller than the precision of isotopic measurements. This work can conclude that there is no significant fractionation during water vapor trapping.