• Korean Journal of Community Nutrition
• /
• v.9 no.2
• /
• pp.225-232
• /
• 2004

The objective of this study is to investigate how patients satisfaction are affected by satisfaction with the patient menu and differentiated service resulting from QI activities and to evaluate the efficiency of QI activities. In order to improve satisfaction with menus through QI activities, this study strengthened meal round, examined the quantity of food waste produced by patients, diversified one-dish menus and used seasonal food as much as possible to reflect patients ′tastes to the maximum. With regard to cooking, additionally, it strengthened sampling and standardized recipes to maintain the constancy of taste and cooking/seasoning. From July 2003, dining time was changed from 08 : 00 to 07 : 30 for breakfast and from 17 : 30 to 18 : 00 for dinner. Statistical data analyses were completed using the SPSS 11.0 program. The results can be summarized as follows: The goal of QI was to improve food service by raising the score of "Satisfaction with Offered Menus" from 3.49 before QI to 3.55 after QI and differentiating nutrition service at the VIP ward. The score of "Satisfaction with offered menus" after QI was 3.56, and services related to the VIP ward were 7 dishes per meal, meal round once per day and the use of a napkin for a spoon in setting the table. In addition a variety of dishes were used in order to heighten the visual effect. Among the 10 items included on the patient satisfaction questionnaire, 8 items showed higher scores before QI. "Taste of meals" (p ＜ 0.05), "Satisfaction with offered menus" (p ＜ 0.05), "Kindness of meal serving assistants" (p ＜ 0.05) and "Cleanliness of clothes ＆ features" (p ＜0.05) of VIP ward were significantly higher than those of a general ward.

• Journal of Korean society of Dental Hygiene
• /
• v.18 no.4
• /
• pp.455-462
• /
• 2018

Objectives: This study was carried out to identify plans to activate home visit oral care services by dental hygienists in Long-term care insurance. Methods: In-depth interviews were carried out with 21 Long-term Home Care Center Managers as target. A total of 21 (27%) Home Care Centers were selected through convenience sampling among 78 Home Care Centers that are located in Won-ju city. The Managers were presented with questions and answered in 20-30 minutes in accordance with the interview instructions. The interview results were analyzed through content analysis, and their experiences and perceptions were classified into two themes and categorized again into four components. Results: The Home Care Center Managers suggested that dental hygienists should activate home-visit oral hygiene services. It is necessary to improve the management process and awareness of the elderly. Conclusions: To activate oral hygiene services, it is necessary to improve the service guideline and enhance the efficiency of the service process. This should be acceptable both to the elderly who need the services and the dental hygienists who provide them.

• Journal of Korean society of Dental Hygiene
• /
• v.18 no.2
• /
• pp.165-175
• /
• 2018

Objectives: This study aims to examine the factors that influence the organizational citizenship behavior of clinical dental hygienists to use them as basic data for improving effectiveness and efficiency of dental clinics and hospitals. Methods: A self-reported questionnaire was answered by 250 clinical dental hygienists in Seoul, Gyeonggi, Chungcheong, Jeolla and Gyeongsang province areas who were chosen using convenient sampling method from May 1st to June 30th of 2017. The data was analyzed using IBM SPSS/WIN 22.0 factor analysis on clinical dental hygienists' organization citizenship behavior, organizational commitment, empowerment, self-leadership and job satisfaction. T-test and one-way ANOVA were performed for subjects' general characteristics and organizational citizenship behavior, organizational commitment, empowerment, self-leadership and job satisfaction depending on their job characteristics. The mean comparison was drawn using the Scheffe test. Pearson's correlation and multiple regression analysis were performed to examine the relation of clinical dental hygienists' organizational citizenship behavior, organizational commitment, empowerment, self-leadership and job satisfaction Also, the significance level was set at 0.05. Results: Clinical dental hygienists' organizational citizenship behavior was 3.84 points with organizational commitment of 3.27, empowerment of 3.41, self-leadership 3.45 and job satisfaction of 3.57. Factors that influence clinical dental hygienists' organizational citizenship behavior appeared in the order of organizational commitment, job satisfaction, self-leadership, empowerment and job intensity, and the model's explanation power was 45.6%. Conclusions: Clinical dental hygienists' organizational citizenship behavior was correlated to career, organizational commitment, empowerment, self-leadership and job satisfaction, where organizational commitment had the biggest influence. Therefore, clinical dental hygienists organizational citizenship behavior needs further studies and investigtae more ways to promote factors that influence organizational citizenship behavior.

• Korean Institute of Interior Design Journal
• /
• v.26 no.1
• /
• pp.114-123
• /
• 2017

The objective of this paper is to investigate problems associated with the storehouse affiliated with rural housing for the elderly engaged in farming activities, and to suggest improvements with the examples of storehouse floor plans. The elderly in rural area still engage in farming even though they are suffering from aging problems. Therefore, the planning of storehouse which has relevance to agriculture is very important. The methods employed were a field survey and interviews with residents. 12 houses belonging to elderly people (60's and over) were selected by the convenient sampling in Cheonan, Chungcheongnam-do. The results are as follows. First, at least more than 3 storehouses have to be planned to store the goods separatedly according to their kinds and characteristics. Second, storehouses should be placed near or directly connected with the main house to support the accessibility of the elderly. Third, the open space has to be planned in front of the storehouse to park a truck for loading goods directly. Fourth, the storage equipments such as shelves should be planned inside of the storehouse for the space efficiency and user convenience. Fifth, the width of the door should be wide enough to carry agricultural products and goods. It is recommended to use double hinged doors or double pocket doors. Besides, the thresholds of the doors should be removed and, rather than using direct lighting system, it is better to use indirect lightings and task lightings together to minimize glare and to provide enough illumination.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.14 no.5
• /
• pp.119-127
• /
• 2010

This paper provides a new approach for durability prediction of reinforced concrete structures exposed to carbonation. In this method, the prediction can be updated successively by a Bayes' theorem when additional data are available. The stochastic properties of model parameters are explicitly taken into account in the model. To simplify the procedure of the model, the probability of the durability limit is determined based on the samples obtained from the Latin Hypercube Sampling(LHS) technique. The new method may be very useful in design of important concrete structures and help to predict the remaining service life of existing concrete structures which have been monitored. For using the new method, in which the prior distribution is developed to represent the uncertainties of the carbonation velocity using data of concrete structures(3700 specimens) in Korea and the likelihood function is used to monitor in-situ data. The posterior distribution is obtained by combining a prior distribution and a likelihood function. Efficiency of the LHS technique for simulation was confirmed through a comparison between the LHS and the Monte Calro Simulation(MCS) technique.

• Journal of Soil and Groundwater Environment
• /
• v.18 no.6
• /
• pp.38-47
• /
• 2013

This study was performed to identify the optimal operating conditions and to evaluate the xylene removal efficiency, applying in-situ soil flushing with the low concentrated solution of 'Tween 80' at the xylene contaminated site. The pilot scale test site ($5m{\times}5m{\times}3m$), was mainly composed of 'sandy loam', with the average hydraulic conductivity of $9.1{\times}10^{-4}cm\;s^{-1}$. The average xylene concentration of the site was 42.1 mg $kg^{-1}$, which was more than 2.5 times higher than Korea soil pollution warning limit (15 mg $kg^{-1}$). For the soil flushing, 7,800 L of 0.1~0.2% surfactant solution was injected into three injection wells at the average injection time of 9 hr $d^{-1}$ for 10 days, followed by the additional only groundwater injection of 6,000 L. The same amount of the effluent solution was extracted from three extraction wells. From the analysis for xylene concentration of all effluent at 3 extraction wells, total 166 g of xylene was removed by in-situ surfactant flushing. Even though the residual xylene concentrations of 7 soil sampling locations in the test site were different due to the soil heterogeneity, from the comparison of xylene concentration at 7 locations before/after the feasibility test, 53.9% of the initial xylene in the site was removed from three extraction wells (mainly Ext-N and Ext-M well). The results showed that the in-situ soil flushing by using low concentrated 'Tween 80' solution had a great potential to remediate the xylene contaminated site.

• Journal of the Korean Society of Tobacco Science
• /
• v.32 no.2
• /
• pp.77-87
• /
• 2010

Traditional simultaneous distillation extraction(SDE) and solid-phase micro extraction(SPME) methods using GC/MS were compared for their effectiveness in the extraction of volatile flavor compounds from different tobacco leaves types(flue-cured, burley, oriental). The major volatile flavor compounds of flue-cured and burley tobacco were similar such as neophytadiene, solanone, megastigmatrienone isomers, ${\beta}$-damascenone and ${\beta}$-ionone. On the other hand, volatile flavor compounds such as norambreinolide, sclareolide were specifically identified in oriental tobacco. Each method was used to evaluate the responses of some analytes from real samples and standards in order to provide sensitivity comparisons between two techniques. Among three types of SPME fibers such as PDMS(Polydimethylsiloxane), PA(Polyacrylate) and PDMS/DVB (Polydimethylsiloxane/Divinylbenzene) which were investigated to determine the selectivity and adsorption efficiency, PDMS/DVB fiber was selected for the extractions of the volatile flavor compounds due to its effectiveness. The qualitative analysis showed that the total amount of volatile flavor compounds in SDE method(130 species) was much more than that in SPME method(85 species). SPME method was more efficient for all the highly volatile compounds than SDE method, but on the other hand, low-volatile compounds such as fatty acids or high-molecular hydrocabons were detected in SDE method. SPME method based on a short-time sampling can be adjusted to favor a selected group compounds in tobacco. Furthermore this results could be used to estimate the aroma characteristics of cigarette blending by using a different type of tobacco with more effectiveness and convenience.

• Korean Journal of Remote Sensing
• /
• v.26 no.3
• /
• pp.347-359
• /
• 2010

Ortho-photos provide valuable spatial and spectral information for various Geographic Information System (GIS) and mapping applications. The absence of relief displacement and the uniform scale in ortho-photos enable interested users to measure distances, compute areas, derive geographic locations, and quantify changes. Differential rectification has traditionally been used for ortho-photo generation. However, differential rectification produces serious problems (in the form of ghost images) when dealing with large scale imagery over urban areas. To avoid these artifacts, true ortho-photo generation techniques have been devised to remove ghost images through visibility analysis and occlusion detection. So far, the Z-buffer method has been one of the most popular methods for true ortho-photo generation. However, it is quite sensitive to the relationship between the cell size of the Digital Surface Model (DSM) and the Ground Sampling Distance (GSD) of the imaging sensor. Another critical issue of true ortho-photo generation using high resolution satellite imagery is the scan line search. In other words, the perspective center corresponding to each ground point should be identified since we are dealing with a line camera. This paper introduces alternative methodology for true ortho-photo generation that circumvents the drawbacks of the Z-buffer technique and the existing scan line search methods. The experiments using real data are carried out while comparing the performance of the proposed and the existing methods through qualitative and quantitative evaluations and computational efficiency. The experimental analysis proved that the proposed method provided the best success ratio of the occlusion detection and had reasonable processing time compared to all other true ortho-photo generation methods tested in this paper.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2015.05a
• /
• pp.99-99
• /
• 2015

본 연구에서는 금강 유역을 대상으로 토양저류함수모형기반의 개념적 강우유출모형의 장기 유출모의를 평가하였다. 연구유역인 금강 22개 계측유역을 주요 유역특성인자(면적, 경사도, SCS-CN등)을 수문학적 거리 산정방법을 활용하여 3개의 유역그룹을 선정하였다. 적용모형인 개념적 강우유출모형은 3개의 토양저류함수모형[확률분포모형(PDM: Probability Distributed Moisture), 유역습윤지수모형(CWI: Catchment Wetness Index), 수정펜맨타입모형(MP: Modified Penman type model)]과 3개의 유역추적모형[병렬2선형 저류지 유출 모형(2PAR: 2-conceptual reservoirs in parallel), 빠른 지표하 흐름을 고려한 병렬 2선형 저류지 유출모형(2PMP: 2Macro-pre Approach parallel structure), 병렬 3선형 저류지 유출모형(3PAR: 3-conceptual reservoirs in parallel)]의 조합인 9개의 모형을 사용하였으며, 2006년부터 2012년의 일자료를 바탕으로 검정(Calibration), 2001년부터 2005년의 일자료를 검증(Validation)을 Monte carlo method(Uniform Random Sampling)로 수행 후, 모형의 성능은 NSE(Nash sutcliffe Efficiency)로 평가하였다. 분석결과 유역그룹에 대한 모형성능의 편차는 작아서 유역그룹에 대한 토양저류 함수모형의 뚜렷한 상관성을 확인할 수 없었다. 이는 금강 유역을 단일 유역 그룹으로 적용할 수 있음을 제시하고 있다. 검정 검증성능 및 검정매개변수의 개수를 바탕으로 적용성 평가를 실시한 결과에서 토양저류함수모형인 확률분포모형(PDM)과 유역추적모형의 병렬2선형 저류지 유출모형(2PAR)와 빠른 지표하 흐름을 고려한 병렬2선형 저류지 유출모형(2PMP)의 조합이 금강 22개 유역에서 적용성이 우수함을 확인하였다. 향후 이 모형을 바탕으로 금강유역의 대표적인 강우유출모형을 개발하고자 한다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.10a
• /
• pp.533-536
• /
• 2016

This paper describes a vibrational energy harvesting circuit with MPPT control. A high-performance AC-DC converter of which the efficiency is improved by using body-bias technique and bulk-driven technique is proposed and applied for the vibrational energy harvesting circuit design. MPPT (Maximum Power Point Tracking) control function is implemented using the linear relationship between the open-circuit voltage of a vibrational device and its MPP voltage. The designed MPPT control circuit traces the maximum power point by periodically sampling the open circuit voltage of a vibrational device, makes the reference voltages using sampled voltage and delivers the maximum available power to load. The proposed circuit is designed with a $0.35{\mu}m$ CMOS process, and the chip area is $1.21mm{\times}0.98mm$.