• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.21 no.45
• /
• pp.319-328
• /
• 1998

In this paper, the design of ALT(Accelerated Life Test) requires a sampling plan based on failure-censored(Type II censored) ALT with lognormal life distribution. Specially the environmental effect of products has been emphasized, so we considered the upper life limit as well as lower life limit in the ALT sampling plan. The optimal plan with a high stress and a low stress is used as test plan, and the total sample size for test and lot acceptability constant which minimize an asymptotic variance of maximum likelihood estimator of assumed model parameters and satisfy the given producer's risk and customer's risk are drawn out. These values can be acquired by means of the computer program that we coded for resolving the difficulty and complexity of calculation.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.11 no.1
• /
• pp.23-32
• /
• 2011

A 40 fJ/c-s, 1 V, 10-bit SAR ADC is presented for energy constrained wearable body sensor network application. The proposed 10-bit dual sampling capacitive DAC topology reduces switching energy by 62% compared with 10-bit conventional SAR ADC. Also, it is more robust to capacitor mismatch than the conventional architecture due to its cancelling effect of each capacitive DAC. The proposed SAR ADC is fabricated in 0.18 ${\mu}m$ 1P6M CMOS technology and occupies 1.17 $mm^2$ including pads. It dissipates only 1.1 ${\mu}W$ with 1 V supply voltage while operating at 100 kS/s.

• Communications for Statistical Applications and Methods
• /
• v.13 no.2
• /
• pp.419-428
• /
• 2006

The method of Reverse Ranked Ordering-Set Sampling(RROSS) as an opposed Ranked Ordering-Set Sampling(ROSS) and Ranked-Set Sampling(RSS) is discussed. We propose the test statistic using sign test on RROSS. This method is effective when observations are expensive and measurement is perhaps destructive or invasive. This method obtains more informations than ROSS and RSS. The asymptotic relative efficiencies of RROSS with respect to ROSS and RSS are always greater than 1 for all sample sizes. We consider a simple model to describe the effect of imperfect judgment errors.

• Communications for Statistical Applications and Methods
• /
• v.26 no.1
• /
• pp.11-25
• /
• 2019

The present paper utilizes auxiliary information to neutralize the effect of non-response for estimating the population mean. Improved ratio type estimators for population mean have been proposed and their properties are studied. These estimators are suggested for both single phase sampling and two phase sampling in presence of non-response. Empirical studies are conducted to validate the theoretical results and demonstrate the performance of the proposed estimators. The proposed estimators are shown to perform better than those used by Cochran (Sampling Techniques (3rd ed), John Wiley & Sons, 1977), Khare and Srivastava (In Proceedings-National Academy Science, India, Section A, 65, 195-203, 1995), Rao (Randomization Approach in Incomplete Data in Sample Surveys, Academic Press, 1983; Survey Methodology 12, 217-230, 1986), and Singh and Kumar (Australian & New Zealand Journal of Statistics, 50, 395-408, 2008; Statistical Papers, 51, 559-582, 2010) under the derived optimality condition. Suitable recommendations are put forward for survey practitioners.

• 한국해양학회지
• /
• v.24 no.4
• /
• pp.165-171
• /
• 1989

To examine the sample variability of zooplankton, samples were collected at two stations in the nearshore off Anhung (Chungnam, Korea), using a NORPAC net (76 Cm diameter, 0.333 mm mesh size) for two days, April 5 and 6, 1989. The net was towed vertically to eliminate the source of variation due to vertical migration. During the period of 6 hours, triplicate sampling was done every one or two hour at each station. Species composition and abundances at two stations were not so different, but the abundances at each station varied greatly with respect to sampling time. Greater abundance at one sampling time ranged 2.3-8.7 times of smaller abundance at another sampling time. At the level of ${\alpha}=0.05$, however, mean abundances of different sampling time did not differ significantly from each other due to the large variance. It was believed that the large variance was caused by the time dependent effect of patchiness of which parameters were varied with time because of sea water movement. From the variation within the triplicate samples, it was considered that the abundance data obtained from single tow were not significantly different from the data in the range of 50-200% of those from single tow. From these results, the necessity for the replicate and time dependent sampling was indicated. In the nearshore like the sampling site of this study, it seemed to be better to reduce the number of stations for the replicate and time dependent sampling though the proper sampling scheme was to be decided based on the goal of the study.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.22 no.5
• /
• pp.740-746
• /
• 2018

Up until now, attempts to produce computer instruments have been largely focused on two types of sampling methods and physical modeling. Since the sampling method removes much of the harmonics in the sampling process, the effect of exciter that emphasizing the harmonic of the strings are mini. However, the physical modeling method can produce a lot of harmonics, and by emphasizing the harmonics of a particular frequency band among these harmonics, it is possible to produce a sound more like a lively sound. In this paper, we propose a method of using white noise in realizing exciter emphasizing harmonics of pre - specified frequency band in prefectural physical modeling. And comparing the envelope and spectrum of the Gayageum sound, we confirmed that the physical modeling method with the exciter is more suitable for the actual Gayageum sound than the sampling method and the conventional physical modeling method.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.9B
• /
• pp.1795-1805
• /
• 1999

In an OFDM (Orthogonal Frequency-Division Multiplexing) system, the sampling frequency offset between the transmitter and receiver is known to cause the interchannel interference (ICI), resulting in performance degradation. In this paper, we propose two time-domain techniques to estimate the sampling frequency offset, especially for a high data-rate OFDM system. The first technique estimates the sampling frequency offset by using the phase difference between two received samples with a fixed amount of time interval, corresponding to the transmitted training symbol, under the assumption of perfect symbol and carrier offset synchronization. The second technique estimates the sampling frequency offset and carrier frequency offset jointly, when the two offsets exist together, by using two training symbols with different frequency components and using a sample algebraic calculation. The proposed estimation techniques for sampling frequency offset cause no time delay due to all time-domain processing, and have a good performance due to no ICI effect. The performances of the proposed techniques are demonstrated by various simulations.

• Survey Research
• /
• v.11 no.3
• /
• pp.33-55
• /
• 2010

In this study, we newly define the Total Survey Error(TSE) in exit poll and investigate the TSEs of the exit poll survey for the 18th general election of 2008 to analyse the cause of the exit poll prediction error. To explore the main cause and effect of the total survey error, the total survey error was divided by the sampling error which comes from sampling process of poll stations and the non-sampling error which comes from selecting voter and collecting responses from sampled voters in each electoral district. We consider the relationship between non-response rates and total survey error as well as non-sampling error. Also, we study the representativeness of the exit poll sample by comparing the sex/age distribution of the exit poll data and the National Election Commission poll data.

• Journal of the Korean Society of Tobacco Science
• /
• v.35 no.1
• /
• pp.7-12
• /
• 2013

A Solid-phase micro extraction(SPME) was evaluated as a tool for headspace sampling of tobacco samples. Several experimental parameters (sampling temperature, pH, and type of SPME fibers) were optimized to improve sampling efficiency in two aspects ; maximum adsorption and selective adsorption of volatile organic acids onto SPME fibers. Among four types of SPME fibers such as PDMS(Polydimethylsiloxane), PA(Polyacrylate), Car/PDMS (Carboxen/Polydimethylsiioxane) and PDMS/DVB(Polydimethylsiioxane/Divinylbenzene) which were investigated to determine the selectivity and adsorption efficiency. A variety of tobacco samples such as flue cured, burley and oriental were used in this study. The effect of these parameters was often dominated by the physical and chemical nature (volatility, polarity) of target compounds. This method allowed us to make important improvements in selectivity and sensitivity. The Car/PDMS fiber was shown to be the most efficient at extracting the 10 selected volatile organic acids. The parameters were optimized: $80^{\circ}C$ adsorption temperature, 30 min of adsorption time, $240^{\circ}C$ desorption temperature, 1 min of adsorption time.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.23 no.9
• /
• pp.1139-1150
• /
• 1999

The evolution of silica aggregate particles in coflow diffusion flames has been studied experimentally using light scattering and thermophoretic sampling techniques. The measurements of scattering cross section from $90^{\circ}$ light scattering have been utilized to calculate the aggregate number density and volume fraction using with combination of measuring the particle size and morphology through the localized sampling and a TEM image analysis. Aggregate or particle number densities and volume fractions were calculated using Rayleigh-Debye-Gans and Mie theory for fractal aggregates and spherical particles, respectively. Of particular interests are the effects of flame temperature on the evolution of silica aggregate particles. As the flow rate of $H_2$ increases, the primary particle diameters of silica aggregates have been first decreased, but, further increase of $H_2$ flow rate causes the diameter of primary particles to increase and for sufficiently larger flow rates, the fractal aggregates finally become spherical particles. The variation of primary particle size along the upward jet centerline and the effect of burner configuration have also been studied.