• ETRI Journal
• /
• v.29 no.5
• /
• pp.596-606
• /
• 2007

It is well known that an OFDM receiver is vulnerable to synchronization errors. Despite fine estimations used in the initial acquisition, there are still residual synchronization errors. Though these errors are very small, they severely degrade the bit error rate (BER) performance. In this paper, we propose a residual error elimination scheme for the digital OFDM baseband receiver aiming to improve the overall BER performance. Three improvements on existing schemes are made: a pilot-aided recursive algorithm for joint estimation of the residual carrier frequency and sampling time offsets; a delay-based timing error correction technique, which smoothly adjusts the incoming data stream without resampling disturbance; and a decision-directed channel gain update algorithm based on recursive least-squares criterion, which offers faster convergence and smaller error than the least-mean-squares algorithms. Simulation results show that the proposed scheme works well in the multipath channel, and its performance is close to that of an OFDM system with perfect synchronization parameters.

• Journal of Power Electronics
• /
• v.10 no.4
• /
• pp.382-387
• /
• 2010

This paper presents a novel design method for determining the PID gains of a speed controller for a servo system compensating variations in bandwidth at a low speed. The variations in bandwidth of a speed controller are measured at a low speed and the relationship between the bandwidth and the damping ratio are verified by determining the location of the closed loop pole. The proposed algorithm uses the z-transform of a plant and speed controller and applies the time-varying sampling method for determining the PID gains of the speed controller at low speed. The magnitude and the phase condition are considered for finding a suitable control gain. The usefulness and effectiveness of the proposed method is demonstrated through experimental results such as low speed control and robust disturbance responses.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.45 no.4
• /
• pp.223-233
• /
• 2009

It has been considered that fishing areas for shrimp beam trawl have been in ruin because Korean local governments have permitted trawling into the areas limited by the fisheries local regulations from 1994. Physical and biological effects of the trawling were investigated in the study. Physical effects were investigated by optical methods such as trawling tracking by side scan sonar and comparing the gear both before and after trawling. Biological aspects were investigated by grab sampling of benthic animals, concentration of trace metals in sediment and a flux evaluation of ${NH_4}^+,\;{PO_4}^-,\;and\;SiO_2$ by coring. The fishing activity had physical impacts on the seabed but these recovered naturally in less than fourty days naturally, which increased the benthic biodiversity, increases the trace metal concentration of and nutrient flux into the seawater, especially phosphate and silicate. This method and these results can help in further studies looking for disturbances by fishing.

• Journal of Korean Academy of Nursing
• /
• v.27 no.3
• /
• pp.588-600
• /
• 1997

Postpartum depression is one of the most serious problems in maternal health because it affects not only the mother but also her family. Postpartum depression disturbs the maternal-infant interaction and attachment. However, most postpartum depression patients ignore this problem and do not seek treatment. Many clinicians and researchers realiza there is a need to develop a postpartum depression scale. Thus, this study has been designed to development of a postpartum depression scale. Data were collected through a survey over a period of three months. Subjects who participated in the study were 167 Korean mothers in their postpartum period. The author used a convenience sampling method. The analysis of the data was done with SPSS PC/sup ＋/ for descriptive statistics, item analysis and factor analysis. Initially 62 items were generated from the interview data of eight postpartum depression patients and from a literature review. This preliminary scale was analyzed for reliability and validity. The results of this analysis are as follows. 1. Initially 62 items were analyzed through the Index of Content Validity(CVI) and 48 items were selected. 2. Seven factors were extracted through the principal component analysis, and these contributed 61% of the variance in the total score. Finally 46 items in the scale loaded .41∼ .84 on one of seven factors. 3. Each factor was labeled. Factor 1 was labeled 'emotional phenomena-emotional upset' and included 13 items, factor 2 was labeled' cognitive phenomena-self concept disturbance' and included seven items, factor 3 was labeled 'relationship to baby-negative feeling' and included six items, factor 4 was labeled 'relationship to baby- overload' and included eight items, factor 5 was labeled 'negative maternal identity' and included five items, factor 6 was labeled 'biophysiological phenomena-disturbance of physical functioning' and included four items, and factor 7 was labeled' interpersonal relationship phenomena-blamed others' and included three items. 4. Cronbach Coefficient Alpha for internal consistency was .95 for the total 46 items. Finally, the author suggests that this scale could be adequately applied in assessing the postpartum depression of mothers during the postpartum period. The results of this study can contribute to designing an appropriate postpartum depression prevention strategy.

• The Korean Journal of Applied Statistics
• /
• v.27 no.6
• /
• pp.991-1002
• /
• 2014

Both Bayesian and maximum likelihood methods are efficient for the estimation of regression coefficients of various Tobit regression models (see. e.g. Chib, 1992; Greene, 1990; Lee and Choi, 2013); however, some researchers recognized that the maximum likelihood method tends to underestimate the disturbance variance, which has implications for the estimation of marginal effects and the asymptotic standard error of estimates. The underestimation of the maximum likelihood estimate in a seemingly unrelated Tobit regression model is examined. A Bayesian method based on an objective noninformative prior is shown to provide proper estimates of the disturbance variance as well as other regression parameters

• The Journal of Korea Assosiation for Disability and Oral Health
• /
• v.1 no.1
• /
• pp.18-24
• /
• 2005

The purposes of this study were 1) to investigate the oral health problem of the disabled according to the handicapped types, 2) to collect the empirical data for developing and establishing the oral health policies for the handicapped, and 3) to find out the major obstacles against the dental services and oral health promotion. The handicapped subjects were collected by designed cluster sampling and interviewed with structured questionnaire in order to measure the oral health knowledge and behaviors. The subjects were attending the special schools and private or public welfare institutions for crippled disorder, encephalopathy disorder, mental retardation, visual disturbance, hearing defect, and developmental disorder. Oral examination was conducted by 13 trained dentists. 1,476 of handicapped people were finally surveyed. The results were as follows; The experiences of visiting dental office during the last one year in 18~64 year-old disabled people were 48.86% in crippled disorder, 52.50% in mental retardation, 58.24% in visual disturbance, 39.29% in hearing defect, respectively. To improve this challenging situation, we should find out the obstacles against the dental service and oral hygiene maintenance by the types of handicap, and develop the oral health policies which could support and advocate the Korean disabled.

• Journal of the Korean Geotechnical Society
• /
• v.27 no.3
• /
• pp.5-17
• /
• 2011

Sampling disturbance can often introduce considerable errors in the laboratory estimation of geotechnical properties of soils. Accordingly, it causes inappropriative results in analysing field behavior. Therefore, a screw plate load test, one of in-situ test technique, is developed in this study, because in-situ testing techniques have advantages for the estimation of reliable geotechnical parameters. The screw plate load test, which was modified from the plate load test, conducts an experiment underneath ground by inserting a spiral type of auger screw. In this study, the structure and characteristics of the screw plate load test device are introduced in detail and the reliability of the device is examined through the analysis of the laboratory test results.

• Proceedings of the KSRS Conference
• /
• 2007.10a
• /
• pp.98-100
• /
• 2007

Tropical forests have variety of biodiversity values, which provide invaluable services to the living being on earth. In the recent years, tropical forests are regarded as valuable global resources that act as sink for carbon dioxide in order to mitigate global climatic change. In many parts of the world, tropical forests are being rapidly cleared by various means. Soil organic carbon (SOC) is concentrated in the upper 12 inches of the soil. So it is readily depleted owing to the degradation activities. In the present study, it was aimed to assess the magnitude of disturbance in the availability of SOC in a semi- evergreen forest, situated in the Eastern Ghats of Tamil Nadu, India. The forest density of this region was mapped with QuickBird satellite data. Intensive field soil sampling and floristic study were conducted to estimate the SOC status in different density classes and to identify the species availability. The SOC density ranged from 274.06 t/ha to 147.84 t/ha in the very dense and degraded semi-evergreen forest respectively. The SOC content was also varied from 3.70 to 1.83 % in the very dense semi-evergreen and medium semi-evergreen forests respectively. The species composition in different density classes was also varied considerably. As a result of this study, it was identified that the disturbance to forests by various means not only affect the density of forests but also affect the below ground SOC status proportionately.

• Journal of the Korean Geotechnical Society
• /
• v.22 no.12
• /
• pp.57-65
• /
• 2006

In the Nakdong River estuary soft and thick clay, which called Pusan clay, are deposited. Despite a number of great reclaimed projects that have been performed in the area, the consolidation settlement and time have been significantly underestimated due dominantly to sample disturbance, since the last decade. In order to resolve the underestmation, it was necessary to examine the compressibility characteristics through a systematic geotechnical investigation on the clay. In this study an advanced sampling technique was adopted on two sites chosen along the coastline, and then oedometer testing and geological investigation were performed for the undisturbed and reconstituted samples. As the results, the compressibility parameters of the clay were representatively determined, as well as their correlation. Particularly the effects of depositional environment on the physical indexes, level of structure, sample disturbance and compressibility parameters were analyzed for the clay.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.14 no.2
• /
• pp.189-197
• /
• 2014

This work proposes a 12b 100 MS/s $0.11{\mu}m$ CMOS three-step hybrid pipeline ADC for high-speed communication and mobile display systems requiring high resolution, low power, and small size. The first stage based on time-interleaved dual-channel SAR ADCs properly handles the Nyquist-rate input without a dedicated SHA. An input sampling clock for each SAR ADC is synchronized to a reference clock to minimize a sampling-time mismatch between the channels. Only one residue amplifier is employed and shared in the proposed ADC for the first-stage SAR ADCs as well as the MDAC of back-end pipeline stages. The shared amplifier, in particular, reduces performance degradation caused by offset and gain mismatches between two channels of the SAR ADCs. Two separate reference voltages relieve a reference disturbance due to the different operating frequencies of the front-end SAR ADCs and the back-end pipeline stages. The prototype ADC in a $0.11{\mu}m$ CMOS shows the measured DNL and INL within 0.38 LSB and 1.21 LSB, respectively. The ADC occupies an active die area of $1.34mm^2$ and consumes 25.3 mW with a maximum SNDR and SFDR of 60.2 dB and 69.5 dB, respectively, at 1.1 V and 100 MS/s.