• Journal of Biosystems Engineering
• /
• v.29 no.6 s.107
• /
• pp.515-520
• /
• 2004

A device far estimating the optimal artificial insemination time consisted of a computer, RS module, and six direct-reflex photo-sensors. Program was written in LabWindows CVI. In order to establish references for estimating optimal artificial insemination time, lying rate of the thirty three $Berkshire{\times}Hampshire crossbred sows (parity 5 to 6) was recorded from 2 days after moving into stalls to artificial insemination using a time lapse VCR and was measured every hour with one minute interval using the scan point sampling method. Twenty low hours in a day were divided into three comparing periods : 21:00 to 06:59, 07:00 to 13:59, and 14:00 to 20:59. If sum of the percentages of tying during a comparing period was less than the reference value, the starting hour of the comparing period was considered as onset of estrus and the optimal artificial insemination time was estimated at 20 to 24 hours after onset of estrus. The experimental device was evaluated with twenty five $Berkshire{\times}Hampshire$ crossbred sows (parity 2 to 7) and 23 of 25 sows $(92\%)$ were pregnant. This result suggests that the experimental device is excellent in performance for estimating optimal artificial insemination time.

• Journal of ILASS-Korea
• /
• v.21 no.4
• /
• pp.223-236
• /
• 2016

On-road source emissions are major air pollutants and have been associated with serious health effects in Seoul metropolis. Thus, it is of fundamental importance to have an accurate assessment of vehicle emissions in order to implement an effective air quality management policy. As a result, there is a need to overview vehicle emission characteristics of air pollutants. This article discusses vehicle exhaust sampling and chemical analysis, emission characteristics of air pollutants, and emission regulations from passenger cars. The vehicle exhaust sampling and chemical analysis methods were described in particulate matter and gaseous compounds. In this article, chassis dynamometer, measurement instrumentation for nano-particulate matter and carbon compounds analysis device were described. For the gasoline and diesel vehicles, the effective parameters of emissions were average vehicle speed, vehicle mileage and model year. The particle number emissions for diesel nano-particles were sensitive to the sampling conditions. Also, the particle number emissions with a diesel particle filter (DPF) largely reduced rather than those without it. This article also describes different emission characteristics of air pollutants according to biodiesel or bioethanol mixing ratio. The Korean emission standards for passenger cars were compared with those of the US and EU. Finally, the objective is to give an overview of relevant background information on emission characteristics of air pollutants from passenger cars in Korea.

• Survey Research
• /
• v.11 no.3
• /
• pp.103-114
• /
• 2010

It is difficult to obtain the population information of target variables when a new sampling design for successive survey is executed. In a research of the Korea National Tourism Survey, we propose a method for selection of efficient stratification variables which are found in a combination of a existing sample data and a new frame list. At first, if there isn't common identification number between the frame list and the sample data, we find a device to substitute for absence of identification number. At second, we suggest a method to search stratification variables correlated with target variables using statistical methods like regression analysis.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.21 no.3
• /
• pp.370-378
• /
• 2018

The mission data in missile systems should be quickly and reliably transmitted from a mission transmission device to a guidance control unit. The MIL-STD-1553B is one of the reliable communication standards, but its bit rate is generally limited to 1Mbps due to the intrinsic properties of its electrical design. Therefore, the bus controller needs to be optimized to efficiently transmit the mission data on the inevitably limited bit rate. This paper proposes an analytical approach based on sampling-based optimization methods to maximize the data throughput without data loss. The proposed approach was evaluated in the simulations with the data transmission model for the MIL-STD-1553B communication system. The results of the proposed methods were applied to a real-time system and showed that the proposed method was successfully performed.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.61 no.7
• /
• pp.1024-1031
• /
• 2012

In this paper, FMCW type radar level transmitter using correlation analysis method is implemented for precise distance measurement of cargo tank. FMCW type radar level transmitter is the device for distance measurement which calculates the distance by analyzing the beat frequency, that is, the frequency difference between Tx and RX signal from radar antenna using Fast Fourier Transform(FFT), but compensated algorithm like Zoom FFT is needed for the improvement of the frequency precision because the frequency precision of FFT is limited depending on sampling frequency and the number of sampling data. In case of Zoom FFT, the number of sampling data and noisy signal are the main factor influencing the measurement accuracy of Zoom FFT like FFT. Therefore, in order to overcome the limited environment and achieve the precise measurement, correlation coefficient is used for the distance measurement and the errors of measurement are verified to be in the range of ${\pm}1mm$.

• Nuclear Engineering and Technology
• /
• v.52 no.1
• /
• pp.101-108
• /
• 2020

In order to solve the contradiction between requirements of high sampling rate for acquiring accurate energy information of pulses and large amount of data to be processed timely, the method with an algorithm to correct errors caused by reducing the sampling rate is normally used in front-end read-out system, which is conductive to extract accurate energy information from digitized waveform of pulse. The functions and effects of algorithms, which mainly include polynomial fitting with different fitting times, double exponential function fitting under different sampling modes, and integral area algorithm, are analyzed and evaluated, and some meaningful results is presented in this paper. The algorithm described in the paper has been used preliminarily in a prototype system of Positron Emission Tomography (PET) for heavy-ion cancer therapy facility.

• IE interfaces
• /
• v.16 no.3
• /
• pp.344-351
• /
• 2003

Critical dimension is one of the most important characteristics of up-to-date integrated circuit devices. Hence, critical dimension control in a semiconductor wafer fabrication process is inevitable in order to achieve optimum device yield as well as electrically specified functions. Currently, in complex semiconductor wafer fabrication processes, statistical methodologies such as Shewhart-type control charts become crucial tools for practitioners. Meanwhile, given a critical dimension sampling plan, the analysis of variance technique can be more effective to investigating critical dimension variation, especially for on-chip and on-wafer variation. In this paper, relating to a typical sampling plan, linear statistical models are presented for the analysis of critical dimension variation. A case study is illustrated regarding a semiconductor wafer fabrication process.

• Journal of the Korean Society of Safety
• /
• v.32 no.3
• /
• pp.54-59
• /
• 2017

This paper presents an efficient finite analysis model and a simulation-based reliability analysis method for stowage device system failure of a container crane with respect to lateral load. A quasi-static analysis model is introduced to simulate the nonlinear resistance characteristics and failure of tie-down and stowage pin, which are the main structural stowage devices of a crane. As a reliability analysis method, a subset simulation method is applied considering the uncertainties of later load and mechanical characteristic parameters of stowage devices. An efficient Markov chain Monte Carlo (MCMC) method is applied to sample random variables. Analysis result shows that the proposed model is able to estimate the probability of failure of crane system effectively which cannot be calculated practically by crude Monte Carlo simulation method.

• Journal of the Korean Society for Precision Engineering
• /
• v.15 no.2
• /
• pp.75-80
• /
• 1998

Process information is known to have the continuous distribution in many manufacturing processes. Generalized p-chart has been developed for controlling processes by classifying the information characteristics into several groups. But it is improper to describe continuous processes with the classified process informal ion, which is based on the classical set concept. Fuzzy control chart, has been developed for the control of linguistic data, but it is also based on the dichotomous notion of classical set theory. In this paper, fuzzy sampling method is studied in order to process the uncertain data properly. The method is incorporated with the fuzzy control chart. Statistical characteristics of the fuzzy representative value are utilized to device the fuzzy-statistical control chart. The fuzzy-statistical control chart is compared with the generalized p-chart and both the sensitivity to the process information distribution change pared robustiness against the noise on the process information of the fuzzy-statistical control chart are shown to be superior.

• Journal of Electrical Engineering and Technology
• /
• v.6 no.3
• /
• pp.408-413
• /
• 2011

In this paper, a real-coefficient approach to Adaptive Frequency Sampling (AFS) technique is developed for efficient equivalent circuit modeling of RF components. This proposed method is advantageous than the vector fitting technique and the conventional AFS method in terms of fewer samples leading to a lower order of a rational function on a given data and to a direct conversion to an equivalent circuit for PSPICE(Personal Simulation Program with Integrated Circuit Emphsis) simulation, respectively. To validate the proposed method, the distributed equivalent circuit of a presented multi-layered RF low-pass filter is obtained using the proposed real-coefficient AFS, and then comparisons with EM simulation and circuit simulation for the device under consideration are achieved.