• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.10a
• /
• pp.834-837
• /
• 2015

In this paper, we designed the FPGA hardware-based real-time ECG simulator, which generates an analog ECG signal within the range of 0 to 5 volts and described function. The ECG signal generated by the simulator can be applied to laboratory tests, the medical device, and the calibration study in various ways. ECG signals generated by simulator are obtained with conventional 24bit quantization to generate the signal data, and they are sampled and quantized to 1kHz of the 8-bit resolution when used as actual data. The proposed simulator is implemented using xilix Spartan-3 and data are transmitted through an RS-232 between the PC and the FPGA simulator. The transmitted data are stored in the memory and the stored data are printed out with the analog ECG signal through DAC (0808). It can also control the heart rate (HR) via the two buttons level UP-DOWN. We used existing ECG input rating for the evaluation of the designed system and evaluated differential circuit for obtaining QRS waveform and the output signal. We finally could obtained proper the result.

• Research in Community and Public Health Nursing
• /
• v.23 no.3
• /
• pp.244-255
• /
• 2012

Purpose: This study was to describe and develop the female university students' healthy dieting. Methods: The data were collected from 9 female students sampled from two universities. The grounded theory of Strauss and Corbin (1990) was applied. Results: As a result, 40 concepts, 16 subcategories, and seven categories were deduced from open coding. Emerged seven major categories were as followings: (1) Recognizing of general health condition, (2) Try to actively participate on social activities, (3) Searching for continuous healthy exercising methods, (4) Utilizing of social support system for healthy dieting, (5) Making an individual healthy rhythms, (6) Exhibiting abilities of self-control, (7) Charging self-confidences. The periods of process were divided into 4 stages, the phase of facing self-health, the phase of searching living conditions, the phase of developing individual strategies, and the phase of forming self-confidence. The core variable, "discovering self competencies" incorporated the relationship between and among all categories and explained the process. Conclusion: This study had described the process of healthy dieting of female university students in Korea. These findings have important implications for health promotion of the female university students and can be utilized as material for developing health programs.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.23 no.2
• /
• pp.123-136
• /
• 2013

Objectives: This paper was prepapred to report airborne asbestos fiber concentrations in asbestos textile, brake-lining, commutator, and building materials manufacturing industries, and some other asbestos related industries in Korea from 1994 to 2006. Methods: Airborne asbestos data that have been sampled and analyzed in the above industries during 1994-2006 were collected. These data were reviewed to scrutinize the qualified data based on the records such as sampling and analyzed method and quality control procedures. All asbestos data were generated using the National Institute for Occupational Safety & Health (NIOSH) Method 7400. Results: Average concentration of asbestos fiber was 2.14 fibers/cc(0.02-15.6 fibers/cc) in the asbestos textile industry, 0.26 fibers/cc(0.01-1.01 fibers/cc) in the building-materials industry, 0.15 fibers/cc(0.01-0.93 fibers/cc) in the brake-lining manufacturing industry, and 0.14 fibers/cc(0.03-1.36 fibers/cc) in the commutator producing industry. For these industries, the percentage of samples of which asbestos fiber concentrations above the limit of exposure(0.1 fibers/cc) was 97.6% in the asbestos textile industry, 62.3% in the building-materials industry, 53.5% in the brake-lining manufacturing industry, and 34.3% in the commutator producing industry. Asbestos fiber concentration was below the limit of exposure in the gasket producing, petrochemistry, musical instrument producing industries, and the brake-lining exchange operations. Conclusions: Airborne asbestos fiber level in the asbestos textile, brake-lining producing, commutator and building-material producing industries was above the limit of exposure, but in the gasket producing, petrochemistry, musical instrument producing industries and the brake-lining exchange operations were below the limit of exposure.

• Journal of Korean Academy of Nursing
• /
• v.7 no.1
• /
• pp.1-9
• /
• 1977

Primary function of health record is that as tool of communication between the health processionals with the mutual goal, the promotion of health care standard. Studies have been carried out world over oil tile subject, among those, Weed's Problem-Oriented Health Record is considered a paramount achievement. This study was designed to assess tile possibility of implementing tile problem-oriented health record system through ail experiment in order to provide data for nurse administrators infiltrating reformation of recording system and format. Record of 29 patients admitted at Korea University Hospital, Seoul, from March through June, 1976 for 4 to 14 days were sampled. Nursing notes were recorded by research assistants; senior nursing student trailed extensively by the researcher oil Problem-Oriented Records, oil Problem Oriented Nursing Record format (experimental group) and analysis were carried out comparative, with that of traditional nursing records noted by other nursing personnel (control group) on the same patient. Attitude towards Problem Oriented Nursing Record system and format were attained through questionaries responded by the 51 research assistants. Results are as fellows: Comparative analysis revealed that: 1. Assessment of patients' health problems recorded significantly more in traditional records. 2. Focus of health Problem differed; traditional records slowed significantly higher frequency in medical and procedure as focus while problem oriented records on nursing focus problems. 3. Problem- Oriented records were better organized, Mean value scores of attitude towards Problem- Oriented Records revealed that: Positive value scores on all 4 categories: 1) Assessment of nursing needs, 2) Nursing care planning 3) Patient progress assessment and 4) Tool of teaching and learning revealed that the Problem-Oriented Nursing Record is positively accepted by tile respondents. Recommendation Further experiments on implementation of Problem- Oriented Health Record are recommended: experiment involving all health professionals, in larger scope and longitudinal.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.7
• /
• pp.1433-1438
• /
• 2009

The purpose of this study is to investigate how the ignition spark timing conversion influences the engine performance of LPG/Gasoline Bi-Fuel engine. We propose the control system which can advance the ignition spark timing in LPG fuel mode more than used in gasoline fuel mode. In order to investigate the engine performance during combustion, engine performance are sampled by data acquisition system, for example cylinder pressure, pressure rise rate and heat release rate, while change of the rpm(1500, 2000) and the ignition timing advance($5^{\circ}$,$10^{\circ}$,$15^{\circ}$,$20^{\circ}$) As the result, between 1500rpm and 2000rpm, the cylinder pressure and pressure rise rate was increased when the spark ignition was advanced but pressure rise rate at $20^{\circ}$was smaller value. Also, the heat release rate at 1500rpm was increased but it was lower around $20^{\circ}$at 2000rpm.

• Journal of Environmental Health Sciences
• /
• v.35 no.4
• /
• pp.322-333
• /
• 2009

In this study, a measurement method was evaluated for the determination of polycyclic aromatic hydrocarbons (PAHs) in the ambient atmosphere. PAHs were sampled by high-volume samplers, and were then analysed with a GC/MS system. Particulate PAHs were collected on $8"{\times}10"$ quartz fiber filter, while vapor phase PAHs were adsorbed on polyurethane foam (PUF). Target compounds included a total of 36 PAHs, which are known to be frequently detected in the urban atmosphere. It was not necessary to clean-up samples before samples were analyzed using GC/MS, and the overall performance of the method was tested by a variety of quality control and quality assurance schemes. It is generally known that the clean-up procedure can negatively affect the recovery of samples. Precision and accuracy was evaluated using SRM provided by US NIST, and the results were generally satisfactory and reliable. However, the GC/MS method appeared not to be adequate for 6-rings PAHs, such as coronene, due to its lower sensitivity. In addition, collection efficiencies for low molecular compounds, such as 2-rings PAHs, were poor because of the lower retention volume of the PUF adsorbent. As a result, it was concluded that the method based on high-volume sampling and GC/MS analysis can give very reliable data by simultaneous sampling of both particulate and vapor phases for 3-rings to 5-rings PAHs of environmental concern.

• Journal of Internet Computing and Services
• /
• v.22 no.2
• /
• pp.11-17
• /
• 2021

Software-defined networking provides a programmable and flexible way to manage the network by separating the control plane from data plane. However, the limited switch memory restricts the number of flow entries in the flow table used to forward packets. This leads to flow table overflow and flow entry reinstallation, which severely degrade the network performance. Therefore, this paper proposes a comprehensive policy for timely eviction of inactive flow entries to optimally maintain flow tables usage. In particular, statistics of user datagram protocol flow entries are periodically sampled to enable the inactive entries to be evicted early. Through traffic-based experiments, we found that the proposed system reduces the number of overflow occurrences and flow entries reinstallation compared to the random and FIFO policies.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.41
• /
• pp.6.1-6.10
• /
• 2019

Background: Osteomyelitis is an intraosseous inflammatory disease characterized by progressive inflammatory osteoclasia and ossification. The use of quantitative analysis to assist interpretation of osteomyelitis is increasingly being considered. The objective of this study was to perform early diagnosis of osteomyelitis on digital panoramic radiographs using basic functions provided by picture archiving and communication system (PACS), a program used to show radiographic images. Methods: This study targeted a total of 95 patients whose symptoms were confirmed as osteomyelitis under clinical, radiologic, pathological diagnosis over 11 years from 2008 to 2017. Five categorized patients were osteoradionecrosis, bisphosphonate-related osteonecrosis of jaw (BRONJ, suppurative and sclerosing type), and bacterial osteomyelitis (suppurative and sclerosing type), and the control group was 117 randomly sampled. The photographic density in a certain area of the digital panoramic radiograph was determined and compared using the "measure area rectangle," one of the basic PACS functions in INFINITT PACS^® (INFINITT Healthcare, Seoul, South Korea). A conditional inference tree, one type of decision making tree, was generated with the program R for statistical analysis with SPSS^®. Results: In the conditional inference tree generated from the obtained data, cases where the difference in average value exceeded 54.49 and the difference in minimum value was less than 54.49 and greater than 12.81 and the difference in minimum value exceeded 39 were considered suspicious of osteomyelitis. From these results, the disease could be correctly classified with a probability of 88.1%. There was no difference in photographic density value of BRONJ and bacterial osteomyelitis; therefore, it was not possible to classify BRONJ and bacterial osteomyelitis by quantitative analysis of panoramic radiographs based on existing research. Conclusions: This study demonstrates that it is feasible to measure photographic density using a basic function in PACS and apply the data to assist in the diagnosis of osteomyelitis.

• Korean Journal of Ecology and Environment
• /
• v.42 no.4
• /
• pp.476-486
• /
• 2009

Major objective of our study was to introduce initial researches of national long-term ecological monitoring studies on Daechung Reservoir, as one of the representative lentic reservoir ecosystems in Korea. For the long-term ecological research (LTER), we conducted preliminary field monitoring during 2008~2009 and analyzed biological parameters such as phytoplankton, zooplankton, and freshwater fish along with chemical water quality and empirical model analysis. According to phytoplankton surveys, major taxa have varied largely depending on seasons and sites sampled. Overall phytoplankton data showed that cyanophyta dominated in the summer period and diatoms dominated in the winter. In zooplankton analysis, 25 species including 20 rotifers, 3 cladocerans and 2 copepods were collected during the survey. The relative abundance of rotifers (86.5%) was always greater than that of cladocerans (6.3%) or copepods (5.1%). There were distinct spatial and inter-annual changes in the abundance of zooplankton in the reservoir, displaying similar patterns in three sites with the exception of S3 during the study. According to fish surveys, 8 families and 39 species were observed during 2008~2009. The most dominant fish was an exotic species of Lepomis macrochirus (23%), indicating an severe influence of exotic species to the ecosystem. TP averaged $17.9\;{\mu}g\;L^{-1}$ ($6{\sim}80\;{\mu}g\;L^{-1}$), which was judged as a mesotrophy, and showed a distinct longitudinal gradients. TN averaged $1.585\;{\mu}g\;L^{-1}$ during the study and judged as hypereutrophic condition. Unlike TP, TN didn't show any large seasonal and spatial variations. Under the circumstances, nitrogen limitation may not happen in this system, indicating that nitrogen control is not effective in the watershed managements. These data generated in the LTER station will provide key information on long-term biological and water quality changes in relation to global warming and some clues for efficient reservoir ecosystem managements.

• Journal of Korean Society for Atmospheric Environment
• /
• v.21 no.2
• /
• pp.191-204
• /
• 2005

Building and furnishing materials and consumer product are important sources of volatile organic compounds(VOCs) and other aldehydes in the indoor environment. Some available evidence indicates that VOCs can cause adverse health effects to the building occupants and contribute to some of the symptoms of what we call, 'Sick House Syndrome' in Korea. The aims of this study were to evaluate the efficiency of emission system and to investigate comparison of the emission characteristics of different building materials such as wall-papers, paints, and adhesives. The emission of VOCs from building materials were determined in the small chambers defining the temperature, relative humidity, and ventilation rate in this study. VOCs were sampled for 20 minutes using Tenax-TA tubes and analysed by GC-MS with thermal desorption. The stability of conditions for temperature and relative humidity in this small chamber system showed that the fluctuation of temperature was between 25.4$\pm$0.3$^{\circ}C$ and that of relative humidity was 50.2$\pm$0.6$\%$ under the airflow rate of 167 mL/min. The emission tests from building materials resulted in TVOC emission rates of 0.011 $\~$ 3.108 mg/m$^{2}$h after 7 days. The general wall-papers emitted toluene abundantly and the natural wall-papers mainly emitted n-butanol and a minor amount of alkanes compound such as n -tetradecane. The remainder consisted of toluene, m,p -xylene, and styrene. The paints mainly emitted toluene and the adhesives mainly emitted chloroform as well as toluene. As a result, this study is expected to suggest meaningful data for future studies in exposure control through selecting healthy building materials and for the establishment of guidelines for various building materials in Korea.