• 한국음향학회:학술대회논문집
• /
• 한국음향학회 1999년도 학술발표대회 논문집 제18권 2호
• /
• pp.173-176
• /
• 1999

In this work, a A/D converter is implemented to obtain 8bit resolution at a conversion rate of 10Msample/s for video applications. Proposed architecture is designed low power A/D converter that pipelined architecture consists of flash A/D converter. This architecture consists of two identical stages that consist of sample/hold circuit, low power comparator, voltage reference circuit and MDAC of binary weighted capacitor array. Proposed A/D converter is designed using $0.25{\mu}m$ CMOS technology The SNR is 76.3dB at a sampling rate of 10MHz with 3.9MHz sine input signal. When an 8bit 10Msample/s A/D converter is simulated, the Differential Nonlinearity / Integral Nonlinearity (DNL/ INL) error are ${\pm}0.5/{\pm}2$ LSB, respectively. The power consumption is 13mW at 10Msample/s.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 B
• /
• pp.1070-1072
• /
• 2001

In recent years, customers and power supplies are interested in power quality. Demands of customers are change from standard quality of distribution power system to various high quality of distribution power system. so, it is necessary to apply power quality compensator, in our project, we develop the power quality compensator of 150kVA which compensates power factor and voltage sag, interruption. it is very frequently occurred power qualify problems[1,2]. As a series and shunt compensator, power quality compensator consists of two inverters with common do link capacitor bank. It compensates the current quality in the shunt part and the voltage qualify in the series part. In this paper we present the design and control algorithm of power quality compensator. As a control algorithm is implemented by digital controller, we consider sample-and-hold of signals. In this simulation, we use EMTDC/PSCAD V3.0 software which can simulate instantaneous voltage and current.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 하계학술대회 논문집 A
• /
• pp.351-353
• /
• 2004

In recent years, customers and power supplies are interested in power quality. Demands of customers are change from standard quality of distribution power system to various high quality of distribution power system. so, it is necessary to apply power quality compensator. in our project, we develop the UPQC(Unfied Power Quality Compensator of 45kVA which compensates power factor and voltage sag, interruption. it is very frequently occurred power quality $problems^{[1-3]}$ As a series and shunt compensator, UPQC consists of two inverters with common do link capacitor bank. It compensates the current quality in the shunt part and the voltage quality in the series part. In this paper, we present the design and control algorithm for 4SkVA UPQC system. As a control algorithm is implemented by digital controller, we consider sample-and-hold of signals. In this simulation, we use EMTDC/PSCAD V3.0 software which can simulate instantaneous voltage and current.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 A
• /
• pp.374-376
• /
• 2001

FACTS technology is developed into the sophisticated system technology which combines conventional power system technology with power electronics, micro-process control, and information technology. Its objectives are achieving enhancement of the power system flexibility and maximum utilization of the power transfer capability through improvements of the system reliability, controllability, and efficiency[1]. As a series and shunt compensator, UPFC consists of two inverters with common dc link capacitor bank. It controls the magnitude of shunt bus voltage and real and reactive power flow of transmission line[2]. In this paper, we present the design and control algorithm of UPFC simulator for KERI simulator. As a control algorithm is implemented by digital controller, we consider sample-and-hold of signals In this simulation, we use EMTDC/PSCAD V3.0 software which can simulate instantaneous voltage and current.

• 정보처리학회논문지A
• /
• 제11A권2호
• /
• pp.195-202
• /
• 2004

본 연구에서 매우 정밀한 샘플링을 필요로 하는 고해상도 비디오 응용면을 위하여 병렬 파이프라인 아날로그 디지털 변환기(ADC)를 설계하였다. 본 ADC의 구조는 4 채널의 10-비트 파이프라인 ADC를 병력 time-interleave로 구성한 구조로서 이 구조에서 채널 당 샘플링 속도의 4배인 200MS/s의 샘플링 속도를 얻을 수 있었다. 변환기에서 핵심이 되는 구성요소는 Sample and Hold 증폭기(SHA), 비교기와 연산증폭기이며 먼저 SHA를 전단에 설치하여 시스템 타이밍 요구를 완화시키고 고속변환과 고속 입력신호의 처리론 가능하게 하였다. ADC 내부 단들의 1-비트 DAC, 비교기 및 2-이득 증폭기는 한 개의 switched 캐패시터 회로로 통합하여 고속동작은 물론 저 전력소비가 가능한 특성을 갖도록 하였다. 본 연구의 연산증폭기는 2단 차동구조에 부저항소자를 사용하여 높은 DC 이득을 갖도록 보강하였다. 본 설계에서 각 단에 D-플립플롭(D-FF)을 사용한 지연회로를 구성하여 변환시 각 비트신호를 정렬시켜 타이밍 오차를 최소화하였다. 된 변환기는 3.3V 공급전압에서 280㎽의 전력소비를 갖고 DNL과 INL은 각각 +0.7/-0.6LSB, +0.9/-0.3LSB이다.

• Journal of information and communication convergence engineering
• /
• 제10권1호
• /
• pp.85-90
• /
• 2012

A 40-MS/sec 10-bit pipelined analog to digital converter (ADC) with a 1.2 Vpp differential input signal is proposed. The implemented pipelined ADC consists of eight stages of 1.5 bit/stage, one stage of 2 bit/stage, a digital error correction block, band-gap reference circuit & reference driver, and clock generator. The 1.5 bit/stage consists of a sub-ADC, digital to analog (DAC), and gain stage, and the 2.0 bit/stage consists of only a 2-bit sub-ADC. A bootstrapped switch with a constant resistance is proposed to improve the linearity of the input switch. It reduces the maximum VGS variation of the conventional bootstrapped switch by 67%. The proposed bootstrapped switch is used in the first 1.5 bit/stage instead of a sample-hold amplifier (SHA). This results in the reduction of the hardware and power consumption. It also increases the input bandwidth and dynamic performance. A reference voltage for the ADC is driven by using an on-chip reference driver without an external reference. A digital error correction with a redundancy is also used to compensate for analog noise such as an input offset voltage of a comparator and a gain error of a gain stage. The proposed pipelined ADC is implemented by using a 0.18-${\mu}m$ 1- poly 5-metal CMOS process with a 1.8 V supply. The total area including a power decoupling capacitor and the power consumption are 0.95 $mm^2$ and 51.5 mW, respectively. The signal-to-noise and distortion ratio (SNDR) is 56.15 dB at the Nyquist frequency, resulting in an effective number of bits (ENOB) of 9.03 bits.

• 한국전기전자재료학회논문지
• /
• 제19권9호
• /
• pp.800-807
• /
• 2006

To enhance the conversion speed more fast, we separate the determination process of MSB and LSB with the two independent ADC circuits of the Incremental Sigma Delta ADC. After the 1st Incremental Sigma Delta ADC conversion finished, the 2nd Incremental Sigma Delta ADC conversion start while the 1st Incremental Sigma Delta ADC work on the next input. By determining the MSB and the LSB independently, the ADC conversion speed is improved by two times better than the conventional Extended Counting Incremental Sigma Delta ADC. In processing the 2nd Incremental Sigma Delta ADC, the inverting sample/hold circuit inverts the input the 2nd Incremental Sigma Delta ADC, which is the output of switched capacitor integrator within the 1st Incremental Sigma Delta ADC block. The increased active area is relatively small by the added analog circuit, because the digital circuit area is more large than analog. In this paper, a 14 bit Extended Counting Incremental Sigma-Delta ADC is implemented in $0.25{\mu}m$ CMOS process with a single 2.5 V supply voltage. The conversion speed is about 150 Ksamples/sec at a clock rate of 25 MHz. The 1 MSB is 0.02 V. The active area is $0.50\;x\;0.35mm^{2}$. The averaged power consumption is 1.7 mW.

• Journal of Electrical Engineering and Technology
• /
• 제7권1호
• /
• pp.1-8
• /
• 2012

The current paper presents a novel control strategy of a three-phase, four-wire Unified Power Quality (UPQC) to improve power quality. The UPQC is realized by the integration of series and shunt active power filters (APF) sharing a common dc bus capacitor. The realization of shunt APF is carried out using a three-phase, four-leg Voltage Source Inverter (VSI), and the series APF is realized using a three-phase, three-leg VSI. To extract the fundamental source voltages as reference signals for series APF, a zero-crossing detector and sample-and-hold circuits are used. For the control of shunt APF, a simple scheme based on the real component of fundamental load current (I $Cos{\Phi}$) with reduced numbers of current sensors is applied. The performance of the applied control algorithm is evaluated in terms of power-factor correction, source neutral current mitigation, load balancing, and mitigation of voltage and current harmonics in a three-phase, four-wire distribution system for different combinations of linear and non-linear loads. The reference signals and sensed signals are used in a hysteresis controller to generate switching signals for shunt and series APFs. In this proposed UPQC control scheme, the current/voltage control is applied to the fundamental supply currents/voltages instead of fast-changing APF currents/voltages, thus reducing the computational delay and the required sensors. MATLAB/Simulink-based simulations that support the functionality of the UPQC are obtained.

• 대한전자공학회논문지SD
• /
• 제43권12호
• /
• pp.65-73
• /
• 2006

본 논문에서는 각종 지능형 센서, control system 및 battery-powered system 응용과 같이 고해상도, 저전력 및 소면적을 동시에 요구하는 시스템을 위한 14b 200KS/s $0.87mm^2$ 1.2mW 0.18um CMOS 알고리즈믹 A/D 변환기 (ADC)를 제안한다. 제안하는 ADC는 요구되는 해상도 및 속도 사양을 만족시키면서, 동시에 면적을 최소화하기 위해 입력단 샘플-앤-홀드 앰프를 전혀 사용하지 않는 알고리즈믹 구조를 채택하였으며, 전체 ADC의 전력소모를 최소화하기 위해 핵심 아날로그 회로 부분에는 향상된 스위치 기반의 바이어스 전력 최소화 기법을 제안하였고, multiplying D/A 변환기에는 클록 선택적인 샘플링 커패시터스위칭 기법을 적용하였다. 또한, 초저전력 온-칩 기준 전류 및 전압 발생기를 제안하여 전체 ADC의 전력소모를 최소화하였다. 제안하는 시제품 ADC는 0.18um 1P6M CMOS 공정으로 제작되었으며, 측정된 DNL 및 INL은 각각 최대 0.98LSB 및 15.72LSB 수준을 보인다. 또한, 200KS/s의 동작 속도에서 SNDR 및 SFDR이 각각 최대 54dB, 69dB이고, 전력 소모는 1.8V 전원 전압에서 1.2mW이며 제작된 ADC의 칩 면적은 $0.87mm^2$이다

• 대한전자공학회논문지SD
• /
• 제43권11호
• /
• pp.37-47
• /
• 2006

본 논문에서는 Digital Video Broadcasting (DVB), Digital Audio Broadcasting (DAB) 및 Digital Multimedia Broadcasting (DMB) 등과 같이 저전압, 저전력 및 소면적을 동시에 요구하는 고성능 무선 통신 시스템을 위한 10b 25MS/s $0.8mm^2$ 4.8mW 0.13um CMOS A/D 변환기 (ADC)를 제안한다. 제안하는 ADC는 요구되는 해상도 및 속도 사양을 만족시키면서 동시에 면적 및 전력 소모를 최소화하기 위해 2단 파이프라인 구조를 사용하였으며, 스위치 기반의 바이어스 전력 최소화 기법(switched-bias power reduction technique)을 적용하여 전체 전력 소모를 최소화하였다. 입력단 샘플-앤-홀드 증폭기는 낮은 문턱전압을 가진 트랜지스터로 구성된 CMOS 샘플링 스위치를 사용하여 10비트 이상의 해상도를 유지하면서, Nyquist rate의 4배 이상인 60MHz의 높은 입력 신호 대역폭을 얻었으며, 전력소모를 최소화하기 위해 1단 증폭기를 사용하였다. 또한, Multiplying D/A 변환기의 커패시터 열에는 소자 부정합에 의한 영향을 최소화하기 위해서 인접신호에 덜 민감한 3차원 완전 대칭 구조의 커패시터 레이아웃 기법을 제안하며, 기준 전류 및 전압 발생기는 온-칩으로 집적하여 잡음을 최소화하면서 필요시 선택적으로 다른 크기의 기준 전압을 외부에서 인가할 수 있도록 설계하였다. 또한, 다운 샘플링 클록 신호를 사용하여 바이어스 전류를 제어함으로써 10비트의 해상도에서 응용 분야에 따라서 25MS/s 뿐만 아니라 10MS/s의 동작 속도에서 더 낮은 전력 사용이 가능하도록 하였다. 제안하는 시제품 ADC는 0.13um 1P8M CMOS 공정으로 제작되었으며 측정된 최대 DNL 및 INL은 각각 0.42LSB 및 0.91LSB 수준을 보인다. 또한, 25MS/s 및 10MS/s의 동작 속도에서 최대 SNDR 및 SFDR이 각각 56dB, 65dB이고, 전력 소모는 1.2V 전원 전압에서 각각 4.8mW, 2.4mW이며 제작된 ADC의 칩 면적은 $0.8mm^2$이다.