• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.30 no.3
• /
• pp.172-181
• /
• 1994

The mesh selectivity of diamond and suare mesh cod-ends at the Southern Korean Sea and the East China Sea were compared for Pampus argenteus, Trachurus japonicus, Trichiurus lepturus. Selection trials were carried out using diamond and square mesh cod-end by trouser type cod-end with cover net. of which the mesh cod-end has four types : A(51.2mm), B(70.2mm), C(77.6mm), D(88.0mm). Selection curves and selection parameters were calculated using a logistic model. The results obained are summarized as follows : 1. Harvest fish : In B. C and D type selection range and fifty percent selection length of the square mesh were about 21mm, 11mm : 12mm, 18mm and 34mm, 5mm higher than those of the diamond mesh, respectively. Selection factor of master curve for the diamond mesh was 1.54 and for the square mesh was 1.68. The optimum mesh size for the diamond mesh was 97.4mm and for the square mesh was 89.3mm, the difference was 8.1mm. 2. Horse mackerel : In A type, selection range was nearly the same for the diamond and the square mesh, but fifty percent selection length of the square mesh was 43mm higher than the diamond mesh. In B. C and D type, selection range and fifty percent selection length of the square mesh were about 6mm, 3mm : 24mm, 21mm and 11mm, 42mm higher than those of the diamond mesh, respectively. Selection factor of master curve for the diamond mesh was 2.37, for the square mesh was 2.77. The optimum mesh size for the diamond mesh was 78.1mm and for the square mesh was 66.8mm, the difference was 11.3mm. 3. Hair tail : In A, B and C type, selection range of the square mesh was about 34mm, 8mm, 60mm higher than those of the diamond mesh. Fifty percent selection length for the diamond mesh was about 5mm, 7mm, 8mm higher than that of the square mesh. Selection factor of master curve for the diamond mesh was 3.11, for the square mesh was 3.48. The optimum mesh size for the diamond mesh was 64.3mm and for the square mesh was 57.5mm, the difference was 6.8mm.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.30 no.3
• /
• pp.161-171
• /
• 1994

Mesh selection analysis for the trawl net were carried out at the Southern Korean Sea and the East China Sea during the 1992-1994 years by the training ship Seabada of the National Fisheries University of Pusan, using A type (51.2mm), B type (70.2mm), C type (77.6mm), D type (88.0mm) square mesh cod-ends. The fishing trials were made using bottom trawl of the trouser type cod-end with cover net. Selection curves and selection parameters were calculated by a logistic model for Sphyraena pinguis, Pampus argenteus, Trachurus japonicus, Pagrus major, Callanthias japonicus, Trichiurus lepturus. The results obtained are summarized as follows: 1. Red barracuda : Selection range and fifty percent selection length in the A type was 115.8mm, 292.8mm, respectively. 2. Harvest fish : Each selection range and fifty percent selection length in the B. C. and D type was 37.7mm, 113.8mm : 40.1mm, 131.7mm and 64.8mm, 148.6mm, respectively. Selection parameters of master curve were : slope, 3.81 : intercept, -6.4. Optimum mesh size was 89.3mm. 3. Horse mackerel : Each selection range and fifty percent selection length in the A, B, C and D type was 43.0mm, 148.3mm : 60.7mm, 183.2mm, 214.5mm and 91.4mm, 254.9mm, respectively. Selection parameters of master curve were : slope 2.30 : intercept, -6.4. Optimum mesh size was 66.8mm. 4. Red seabrem : Selection range and fifty percent selection length in the D type was 42.7mm, 203.4mm, respectively. 5. Yellowsail red bass : Selection range and fifty percent selection length in the A type was 84.0mm, 110.6mm, respectively. 6. Hair tail : Each selection range and fifty percent selection length in the A, B and C type was 59.7mm, 176.0mm : 100.9mm, 250.7mm and 178.6mm, 307.0mm, respectively. Selection parameters of master curve were : slope, 1.54 : intercept, -5.4. Optimum mesh size was 57.5mm.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2007.05a
• /
• pp.1665-1669
• /
• 2007

경상북도 지역에서 낙동강에 위치한 안동의 하회마을, 내성천에 위치한 예천의 회룡포와 영주의 무섬마을 등은 마을 앞에 위치한 깨끗한 백사장으로 널리 알려진 관광명소이다. 하회마을의 점사주의 경우 낙동강 상류에 안동 및 임하 다목적댐이 건설되면서, 수량이 조절됨에 따라 토사수리학적 특성이 상당히 변화되었으며, 식생이 발생하는 등 옛 모습을 상실해 가고 있는 지역이다. 이 연구는 낙동강의 중상류 구간인 안동조정지댐 직하류부터 하회마을 직하류에 위치한 광덕교 지점까지의 하도구간에 일차원 하상변동 수치모형인 HEC6 모형을 적용하여 하회마을 앞의 점사주에 영향을 미치는 토사수리학적 특성 변화를 규명할 목적으로 수행하였다. 수치모형 적용구간의 하상변동을 예측하기 위해 적절한 일차원 준정상 상태 하상변동모형으로 HEC-6 모형을 선정하였으며, 모형적용을 위한 현황분석으로 하상토 특성 자료를 수집 분석하였다. 지형자료에 대한 분석 결과, 다목적댐 건설 이후 하회구간의 하천 지형 변화의 특징으로 저수로 쪽의 하상저하가 두드러지게 나타남을 발견할 수 있었다. 모형의 적용영역 내에 위치한 각 수위표 지점의 수리 수문자료를 수집하여 분석하였다. HEC-6 모형의 보정은 고정상 및 이동상 수리모형 실험결과를 사용하여, 고정상 보정과 이동상 보정으로 구분하여 수행하였다. 이동상 보정 결과 Ackers and White 공식이 다른 공식에 비하여 전반적으로 우수한 결과를 제공함을 알 수 있었다. 하천망 유사이동 수치모형인 HEC-6 모형을 사용하여 장기 하상변동을 예측하였으며, 댐 건설이 하류 하천의 지형변화에 미치는 영향을 분석하였다.ppm)인 시료에 적합한 여과법을 이용하여 분석하였으며, 유사 입경분포 분석방법으로는 BW관 방법을 이용하여 분석하였다. 현재까지 국내 외적으로 하천 유사량 산정과 관련된 많은 경험식들이 제시되고 있다. 하지만, 외국의 충적하천에 기초하여 개발되어진 유사량 공식들을 우리나라 하천에 무분별하게 적용하는 것은 위험스러우며, 유사량 산정 결과의 신뢰성을 높이기 위해서는 무엇보다 우리나라 하천의 지형, 수리, 수문학적 요소들이 유사 특성에 미치는 영향을 알아야 한다. 그러므로, 본 연구에서는 실측을 통한 유사량 값을 하천의 지형, 수리, 수문학적 요소들과 비교 분석하여우리나라 하천에 맞는 유사특성을 알아보고, 기타 총유사량산정 공식을 이용하여 실측한 유사량과 비교 분석하고자 한다.호강유역의 급격한 수질개선을 알 수 있다.世宗實錄) $\ulcorner$지리지$\lrcorner$(地理志)와 동년대에 동일한 목적으로 찬술되었음을 알 수 있다. $\ulcorner$경상도실록지리지$\lrcorner$(慶尙道實錄地理志)에는 $\ulcorner$세종실록$\lrcorner$(世宗實錄) $\ulcorner$지리지$\lrcorner$(地理志)와의 비교를 해보면 상 중 하품의 통합 9개소가 삭제되어 있고, $\ulcorner$동국여지승람$\lrcorner$(東國與地勝覽) 에서는 자기소와 도기소의 위치가 완전히 삭제되어 있다. 이러한 현상은 첫째, 15세기 중

• Korean Journal of Medicinal Crop Science
• /
• v.10 no.2
• /
• pp.75-81
• /
• 2002

Indoor seed treatments to elevate seedling emergence should be of value. The study was done to model the presown treatments of Platycodon grandiflorum seeds by evaluating the treatment effects of priming,$GA_3$, drying and water imbibition after drying on their germination and then their successive seed treatments on the basis of its seedling emergence. after priming using $Ca(NO_3)_2\;and\;GA_3$ treatment under their different concentrations and light quality illuminated for 12 hours a day were done separately and their two best results were compared to determine the better one, drying of imbibed seeds using the above best result and water imbibition of the dried seeds were successively done to check the rates of germination and emergence. In each treatment of priming and $GA_3$, the former best germination occurred at $Ca(NO_3)_2$ 150 mM done under 2 day darkness but the latter one did at 0.01 mM done under 12 hour a day red light forced for 3 days. Of the two best results from priming and $GA_3$ treatments, the latter result was shown higher germination rate. $GA_3$ treated seeds were best desiccated under $35^{\circ}C$ and 4 hour red light illumination. The germination rate of seeds dried after $GA_3$ treatment was enhanced as imibibed 2 days immediately before sowing. Seedling emergence of all 3 successive treatments, $GA_3$, drying and water imbibition before sowing was the greatest than the two others, only $GA_3$ treatment and the combination of $GA_3$ and drying, in which indicated that its presown seed treatment must follow the successive procedure of the above 3 ones.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.27-27
• /
• 2011

For the design of real applicable molecular devices, current-voltage properties through molecular nanostructures such as metal-molecule-metal junctions (molecular junctions) have been studied extensively. In thiolate monolayers on the gold electrode, the chemical bonding of sulfur to gold and the van der Waals interactions between the alkyl chains of neighboring molecules are important factors in the formation of well-defined monolayers and in the control of the electron transport rate. Charge transport through the molecular junctions depends significantly on the energy levels of molecules relative to the Fermi levels of the contacts and the electronic structure of the molecule. It is important to understand the interfacial electron transport in accordance with the increased film thickness of alkyl chains that are known as an insulating layer, but are required for molecular device fabrication. Thiol-tethered RuII terpyridine complexes were synthesized for a voltage-driven molecular switch and used to understand the switch-on mechanism of the molecular switches of single metal complexes in the solid-state molecular junction in a vacuum. Electrochemical voltammetry and current-voltage (I-V) characteristics are measured to elucidate electron transport processes in the bistable conducting states of single molecular junctions of a molecular switch, Ru(II) terpyridine complexes. (1) On the basis of the Ru-centered electrochemical reaction data, the electron transport rate increases in the mixed self-assembled monolayer (SAM) of Ru(II) terpyridine complexes, indicating strong electronic coupling between the redox center and the substrate, along the molecules. (2) In a low-conducting state before switch-on, I-V characteristics are fitted to a direct tunneling model, and the estimated tunneling decay constant across the Ru(II) terpyridine complex is found to be smaller than that of alkanethiol. (3) The threshold voltages for the switch-on from low- to high-conducting states are identical, corresponding to the electron affinity of the molecules. (4) A high-conducting state after switch-on remains in the reverse voltage sweep, and a linear relationship of the current to the voltage is obtained. These results reveal electron transport paths via the redox centers of the Ru(II) terpyridine complexes, a molecular switch.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.36 no.3
• /
• pp.183-191
• /
• 2010

The crude ethanol extracts and their solvent-partitioned fractions derived from the leaf and twig of Viburnum dilatatum Thunb. were investigated for their 1,1-diphenyl-2-picrylhydrazyl (DPPH) scavenging efficacy. The results showed that the butanol-soluble fraction ($SC_{50}\;=\;110.30\;{\mu}g/mL$) exhibited higher anti-oxidant activity than the crude ethanol extract ($SC_{50}\;=\;117.03\;{\mu}g/mL$) in the DPPH assay model. Then, the effects of the same extract samples on the production of nitric oxide were examined in LPS-stimulated RAW264.7 cells. Although the hexane and methylene chloride-soluble fraction showed a weak anti-oxidant activity, they exhibited potent inhibitory activity of NO production above 50 % at a concentration of $10\;{\mu}g/mL$. The hexane-soluble fraction also showed the inhibitory effect on mRNA expression of pro-inflammatory mediators such an TNF-$\alpha$, IL-$1{\beta}$, IL-6, iNOS and COX-2 in LPS-stimulated RAW264.7. These results suggest that the solvent extracts of Viburnum dilatatum Thunb. could be used as an anti-irritation ingredient.

• Bulletin of the Korean Chemical Society
• /
• v.33 no.1
• /
• pp.48-54
• /
• 2012

The $[Fe_4S_4]^{2+}$ clusters with 2-, 3-, and 4-pyridinemethanethiolate (S2-Pic, S3-Pic, and S4-Pic, respectively) terminal ligands have been synthesized from the ligand substitution reaction of the $(^nBu_4N)_2[Fe_4S_4Cl_4]$ (I) cluster. The new $(^nBu_4N)_2[Fe_4S_4(SR)_4]$ (R = 2-Pic; II, 3-Pic; III, 4-Pic; IV) clusters were characterized by FTIR and UV-Vis spectroscopy. Cluster II was crystallized in the monoclinic space group C2/c with a = 24.530 (5) $\AA$, b = 24.636(4) $\AA$, c = 21.762(4) $\AA$, ${\beta}=103.253(3)^{\circ}$, and Z = 8. The X-ray structure of II showed two unique 2:2 site-differentiated $[Fe_4S_4]^{2+}$ clusters due to the bidentate-mode coordination by 2-pyridinemethanethiolate ligands. Cluster III was crystallized in the same monoclinic space group C2/c with a = 26.0740(18) $\AA$, b = 23.3195(16) $\AA$, c = 22.3720(15) $\AA$, ${\beta}=100.467(2)^{\circ}$, and Z = 8. The 3-pyridinemethanethiolate ligand of III was coordinated to the $[Fe_4S_4]^{2+}$ core as a terminal mode. Cluster IV with 4-pyridinemethanethiolate ligands was found to have a similar structure to the cluster III. Fully reversible $[Fe_4S_4]^{2+}/[Fe_4S_4]^+$ redox waves were observed from all three clusters by cyclic voltammetry measurement. The electrochemical potentials for the $[Fe_4S_4]^{2+}/[Fe_4S_4]^+$ transition decreased in the order of II, III and IV, and the reduction potential changes by the ligands were explained based on the structural differences among the complexes. The complex III was reacted with sulfonium salt of $[PhMeSCH_2-p-C_6H_4CN](BF_4)$ in MeCN to test possible radical-involving reaction as a functional model of the [$Fe_4S_4$]-SAM (S-adenosylmethionine) cofactor. However, the isolated reaction products of 3-pyridinemethanethiolate-p-cyanobenzylsulfide and thioanisole suggested that the reaction followed an ionic mechanism and the products formed from the terminal ligand attack to the sulfonium.

• Journal of the Society of Disaster Information
• /
• v.8 no.3
• /
• pp.297-303
• /
• 2012

This study examines the isolation-heat performance of fire proof fabric that is equipped over ceiling board in order to secure the capability of arresting the spread of a fire at roof 'Jucsim' structure of Wooden Cultural Properties. For this examination, I conduct experiments with the model and compare two construction methods of fire proof fabric, or flat-type, folding-type. The experiments show the following results. In case of installing the fire proof fabric in flat-type, when the temperature under the ceiling board is $750^{\circ}C$, the temperatures over the ceiling board is $50^{\circ}C$; the difference is $700^{\circ}C$. Compared with the case of removing fire proof fabric, the temperature over the ceiling board is lower by approximately $580^{\circ}C{\sim}600^{\circ}C$. Therefore it can be said that the construction of fire proof fabric enhances the isolation-heat performance. In case of installing the fire proof fabric in folding-type, when the temperature under the ceiling board is $600^{\circ}C$, the temperatures over the ceiling board is $65^{\circ}C$; the difference is approximately $530^{\circ}C$. Thus its isolation-heat performance is a little inferior to the flat-type equipment.

• Journal of Environmental Science International
• /
• v.15 no.8
• /
• pp.775-784
• /
• 2006

In this study, CN value was estimated by using detailed soil map and land cover characteristic against upper basin of Kumho watermark located on the upper basin of Kumho river and the hydrologic morphological characteristic factors were extracted from the basin by using the DEM document. Also the runoff analysis was conducted by the WMS model in order to study how the assumed CN value affects the runoff characteristic. First of all, as a result of studying the soil type in this study area, mostly D type soil was Identified by the application of the 1987 classification criteria. However, by that in 1995, B type soil and C type soil were distributed more widely in that area. When CN value was classified by the 1995 classification criteria, it was estimated lower than in 1987, as a result of comparing the estimated CNs by those standars. Also it was assumed that CN value was underestimated when the plan for Geum-ho river maintenance was drawn up. As a result of the analysis of runoff characteristic, the pattern of generation of the classification criteria of soil groups appeared to be similar, but in the case of the application of the classification criteria in 1995, the peak rate of runoff was found to be smaller on the whole than in the case of the application of the classification criteria in 1987. Also when the statistical data such as the prediction errors, the mean squared errors, the coefficient of determination and other data emerging from the analysis, was looked over in total, it seemed appropriate to apply the 1995 classification criteria when hydrological soil classification group was applied. As the result of this study, however, the difference of the result of the statistical dat was somewhat small. In future study, it is necessary to follow up evidence about soil application On many more watersheds and in heavy rain.

• Imaging Science in Dentistry
• /
• v.33 no.2
• /
• pp.97-105
• /
• 2003

Purpose : To evaluate the effect of all-trans-retinoic acid (ATRA) on the radiosensitivity of normal human oral keratinocyte (NHOK). Materials and methods: Relative cell survival fraction including SF2 (survival fraction at 2 Gy) was calculated on the basis of colony formation assay. Data were fitted to the linear-quadratic model to establish the survival curve and calculate α and β values. Using flow cytometry at 1, 2, 3, 4, and 5 days after exposure to 2 and 10 Gy irradiation, cell cycle arrest and apoptosis were analysed. To understand the molecular mechanism of the radiosensitization of ATRA on NHOK, proteins related with apoptosis and cell cycle arrest were investigated by Western blot analysis. Results: Treatment with ATRA resulted in a significant decrease of SF2 value for NHOK from 0.63 to 0.27, and increased α and β value, indicating that ATRA increased radiosensitivity of NHOK. ATRA increased LDH significantly, but increasing irradiation dose decreased LDH, suggesting that the radiosensitizing effect of ATRA is not directly related with increasing cell necrosis by ATRA. ATRA did not induce appotosis but increased G2 arrest after 10 Gy irradiation, implying that the increased radiosensitivity of NHOK may be due to a decrease in mitosis casued by increasing G2 arrest. ATRA inhibited the reduction of p53 at 3 days after l0Gy irradiation and increased p21 at 1 day after 10 Gy irradiation. Further study is required to determine the precise relationship between this effect and the radiosensitizing effect of A TRA. Conclusion: These results suggested that ATRA increase radiosensitivity by inhibiting mitosis caused by increasing G2 arrest.