• Korean journal of food and cookery science
• /
• v.6 no.1
• /
• pp.41-51
• /
• 1990

A special form of questionaire was prepared and distributed to 502 housewives in seoul from Feb. 8th to 22nd in 1989. The results were as follows: In Cooking methods, they tended to follow in the steps of their mother, and it took about half an hour or an hour to prepare a meal. They cooked fried foods once or twice a month. Whenever they fried foods they need new oil. Followings were details of cooking method mainly used by housewives. Fishes were tended to be roast, vegetables to be dressing and seasoning. Highly milled boiled rice was best preferred as the cheif food, and it was cooked by following procedure; First rice was washed, and steeped in water for the time being. Next, the water was poured out and water was filled again, then rice with the water was boiled. Fish Chige was cooked in the way that fish was put into the boiled soup. Fermented sao-bean paste Chige was cooked using water in which rice had been washed. Hard-boiled beef with soy sauce was made using the method that soy sauce was properly poured after beef was boiled. A Spinach was boiled shightly with salty water. In view of those results, there were many cases that housewives did not only utilize their knowledge about foods in real dietary life, but also fell short of endeaver to do so. They chiefly made use of the cooking methods instructed from their mother or husband's mother. In conclusion, in order to illuminate housewives to have an exact nutritional knowledge about foods and cooking methods getting out of the loss of nutritions, nutritional education program must be provided for housewives.

• Corrosion Science and Technology
• /
• v.18 no.6
• /
• pp.228-231
• /
• 2019

Aluminum and its alloys have been widely used in various fields because of low weight, high strength, good conductivity, and low price. It is well known that aluminum alloys that cause natural oxide film can inhibit corrosion in wet, salty environments. However, these oxides are so thin that corrosion occurs in a variety of environments. To prevent this problem, an electrochemical anodizing technique was applied to the aluminum alloy surface to form a thick layer of oxide and a unique oxide shape, such as a hierarchical pore structure simultaneously combining large and small pores. The shape of the structures was implemented using stepwise anodization voltages such as 40 V for mild anodizing and 80 V for hard anodizing, respectively. To maximize water repellency, it is crucial to the role of surface structures shape. And a hydrophobic thin film was coated by 1H, 1H, 2H, 2H-Perfluorodecyltrichlorosilane (FDTS) to minimize surface energy of the structure surface. Thus, such nanoengineered superhydrophobic surface exhibited a high water contact angle and excellent corrosion resistance such as low corrosion current density and inhibition efficiency.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.17 no.2
• /
• pp.3778-3783
• /
• 1975

The objective of this study is to determine an appropriate cement of soil-cement in which silty soil of salty tidal flat with low plasticity was used. Physical, chemical and mechanical tests were conducted to find out the standard properties of the soil to be used. Various cement contents used in this test were 8%, 10%, 12%, and 14%, and the compressive strength was tested after 7 days and 28 days of standard curing in the above each cement content respectively. The results obtaind are summarized as follows. 1. As the cement content was increased from 8% to 14%, Maximum dry density (M.D.D.) and optimum moisture content (O.M.C.) were not changed remarkably. 2. Density of soil-cement was directly proportional to cement content and inversely proportional to water content. 3. OMC was generally decreased in proportion to the increase of cement content. 4. Compressive stranth was directly proportional to centent and inversely proportional to water content. 5. In freezing and thawing test, maximum loss of 10% in the total Weight was found on the 8% cement mixture. and This loss was rapidly decreased to 2% when the Cement content of the mixture was more than 10%.

• Journal of the Korean Society of Food Culture
• /
• v.15 no.5
• /
• pp.413-422
• /
• 2000

This study was undertaken to investigate meal pattern, nutrition knowledge and food preference of 438 rural middle school students living in ChunNam area. As far as nutrition knowledge is concerned, most subjects did not answer correctly on the items of basic five food groups, animal fat and vegetable oil, empty source of soft drink, nutrient requirement and water's role in energy metabolism. However they responded well on the item of iron deficiency and dietary source of Ca. Male students were significantly better in the answering the items of dietary source of energy and nutrient requirement than females, while female students were significantly better on the items of water's role in energy metabolism related to obesity. Generally the respondents did neither consume oil often nor consider consumption of salty food. Furthermore, only 38.6% of subjects drink milk daily in spite of understanding dietary source of Ca, which suggested that they should incorporate nutrition knowledge into dietary behavior. The preferred foods for most subjects were fruit, kimbab and ice cream. Contrastingly the food that they did not prefer was fermented vegetable probably due to strong flavor.

• Journal of Korean Society of Water and Wastewater
• /
• v.30 no.4
• /
• pp.459-469
• /
• 2016

Gas hydrate desalination process is based on a liquid to solid (Gas Hydrate, GH) phase change followed by a physical process to separate the GH from the remaining salty water. The GH based desalination process show 60.5-90% of salt rejection, post treatment like reverse osmosis (RO) process is needed to finally meet the product water quality. In this study, the energy consumption of the GH and RO hybrid system was investigated. The energy consumption of the GH process is based on the cooling and heating of seawater and the heat of GH formation reaction while RO energy consumption is calculated using the product of pressure and flow rate of high pressure pumps used in the process. The relation between minimum energy consumption of RO process and RO recovery depending on GH salt rejection, and (2) energy consumption of electric based GH process can be calculated from the simulation. As a result, energy consumption of GH-RO hybrid system and conventional seawater RO process (with/without enregy recovery device) is compared. Since the energy consumption of GH process is too high, other solution used seawater heat and heat exchanger instead of electric energy is suggested.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.5
• /
• pp.1754-1759
• /
• 2010

Because the stone cultural properties located outdoors, they have been altered and deteriorated in external appearance due to environmental factors such as acid rain, extreme change in temperature, and salts. Damage to stone cultural properties is accelerated particularly due to recent industrial development and environmental pollution. An experimental study was conducted to evaluate the effect of environmental contaminants(sea water and air pollutants such as, $SO_2$, NO, $CO_2$) on the weathering of granite. And as part of the developing of conservation method, $TiO_2$ catalyst was prepared and tested. After expose a granite to sea water and air pollutants, the mineral compositions of the tested granite surface were lower then that of the fresh granite. And absorption capacity of the weathered granite was steadily increased. From these results, it was expected that granite could be weathered by sea water and air pollutants. For the $TiO_2$ coated granite, absorption capacity was slightly enhanced compared to the $TiO_2$ non-coated granite. Therefore, the $TiO_2$ coating method tested in this study considered to be a viable method to assist in the conservation of granite from environmental contaminants.

• Korean Journal of Community Nutrition
• /
• v.17 no.4
• /
• pp.440-449
• /
• 2012

This study was carried out to investigate the distribution of body composition, and to analyze its relationship to dietary behaviors and life style. The study subjects were divided into 3 age groups; 30' years (n = 78) 40' years (n = 71) and 50' years (n = 44). The data was collected by physical measurement (Inbody 230) and questionnaires. The rate of disease and general characteristics were higher in the 50 year old group than in the other groups. Average amount of body water, protein, mineral and body fat were 29.0 kg (50.4%), 7.7 kg (13.4%), 2.8 kg (4.8%), 18.7 kg (31.5%), respectively. The rate of menopause was significantly different with increasing age. Menopause was 1.3%, 9.1%, 79.6% by age respectively. Body fat percent was significantly increased and body water decreased with age (p < 0.01). The fat composition was higher and the mineral content was lower in 50' year old group. Dietary behavior scores of 30' year old group was significant lower than in the other two groups (p < 0.001). The means of salty eating, skipping meals, fruit intake and food habits total point were significantly higher in the 50 year old group than in the other groups. There were significant positive correlations between age, BMI, waist hip ratio respectively (p < 0.01). There were significant negative correlations between age and body water, body mineral, skeletal muscle (p < 0.01, p < 0.05, p < 0.01). The results of this study suggested that nutritional management and education for adult women differ by age group.

• Journal of the Korean Geotechnical Society
• /
• v.35 no.4
• /
• pp.37-42
• /
• 2019

Hydrate dissociation is required to produce methane, which generates both water and methane. Thus, multiphase fluid flow and desalination are expected during methane production, which causes the fine migration and clogging in pores. The goal of this study is to explore the effects of both multiphase fluid flow and desalination on the migration and clogging of kaolin particles as typical fines. The results are as follows : (1) the larger the pore size is, the more mounting the critical clogging concentration is, (2) kaolin particles are more easily clustering and clogging in deionized water than salty water, and (3) the critical clogging concentration of kaolin in multiphase fluid flow is lower than in singlephase fluid flow. Therefore, clustering and clogging of kaolin within pore occur easily due to desalination and multiphase fluid flow when methane is produced from hydrates, and the efficiency of methane production is expected to decrease due to the degradation of permeability coefficient.

• Asian Journal of Turfgrass Science
• /
• v.22 no.2
• /
• pp.149-160
• /
• 2008

This study was carried out to examine the growth performance of 10 cultivars of creeping bentgrass under salt injury in Seo-san reclaimed area. Turfgrass performance studies included 10 creeping bentgrass cultivars (T-1, L-93, Penn A1, Pennlinks II, Seaside II, Declaration, Penn A4, Crenshaw, Dominant, and Penncross). Ten creeping bentgrass cultivars were grown on a USGA recommended research green. Plots were seeded on May 31, 2006 at the rate of $7\;g{\cdot}m^{-1}$. Electric conductivities of irrigation water (ECw) and soil (ECe) were ranged from 0.28 to $3.3\;d\;S{\cdot}m^{-1}$ and from 0.25 to $3.5\;d\;S{\cdot}m^{-1}$ respectively. Leaf color, turf quality, coverage rate, and growth rate were checked under the salty condition in reclaimed land for 2 year. Creeping bentgrass cultivars of T-1, Penn links, and Crenshaw presented dark green color and Penn A1, Declaration showed lighter green color. Penn A1, Penn A4 and L-93 exhibited the highest overall turfgrass quality. Average visual coverage was 75.3% after eleven weeks after seeding. Dominant, L-93, and Penn A1 resulted in higher visual coverage compared to the other cultivars. There was no difference in density among cultivars at 1 year after establishment. However, Declaration, Penn A1, T-1, and L-93 showed higher density compared to the other cultivars at 2 years after seeding. Creeping bentgrass showed different quality, density and color in salty soil (ECe: $0.25-3.5\;d\;S{\cdot}m^{-1}$) and from application of salty irrigation water (ECw: $0.28-3.3\;d\;S{\cdot}m^{-1}$) conditions. These results will be useful where selecting green cultivars for the golf courses in reclaimed land area.

• Journal of Ocean Engineering and Technology
• /
• v.33 no.6
• /
• pp.632-640
• /
• 2019

Desalination plant ships have been recently regarded as one of the probable solutions for drought seasons in many countries. Because desalination plants should be mounted on the desalination ships and special purpose storages such as salty waste water tanks are necessary, onboard and compartment arrangements would be distinguished from those of other conventional commercial ships. This paper introduces some basic design procedure including resistance/propulsion and seakeeping performances. The ship lines were improved step by step after modification of the ship lines and verification of resistance/propulsion performances using computational fluid dynamics (CFD). After finalization of the ship lines, the seakeeping performance was also evaluated to check motion behaviors and drive wave-induced loads such as the wave shear force and bending moment. It was proved that the predicted long-term vertical wave shear force and bending moment were significantly less than the rule-based ones, thus it is expected that the deliverables of this study will reduce the construction cost of desalination plant ships.