• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.58 no.9
• /
• pp.1764-1768
• /
• 2009

As the demand of electric power is increasing rapidly, the need of the compact and light electric power device is also increased. Copper clad aluminum (CCA) is newly proposed electrical conductor, because of its light-weight and low-cost characteristics, to replace the existing conductor made of copper. This paper presents the salt-proof characteristics of the copper clad aluminum (CCA) to certificate long time safe operation of the newly proposed electrical conductor. The two types of the CCA conductor were tested in the neutral salt spray tester. The experimental results of two types of the CCA with salt spray were presented in this paper. The results comprise resistance measured data, micro picture of the selected surface, and component measured data according to the elapsed time. The period of the experiment was 1,000 hours. There was no evidence to show the corrosion of CCA during the whole period of the experiments.

• Journal of the Korean Society of Industry Convergence
• /
• v.16 no.1
• /
• pp.14-20
• /
• 2013

In this study, characteristic of new materials for repairing/reinforcement of sea and underwater structures using urethane were studied experimentally. As a results, following their good result was obtained. Materials and construction methods due to a chemical reaction, so no seams, shape or form, regardless of the variety of civil engineering in the field can be applied. Fast workability, hardening existing concrete compared with 80% in shortening. Than the existing large concrete pouring construction cost could be reduced by more than 30%.

• Proceedings of the KIEE Conference
• /
• 2008.10c
• /
• pp.26-28
• /
• 2008

전기기기 제품, 부품의 부식을 검증하기 위해서 염수, 아황산가스, 암모니아 가스 등을 이용한다. 염수시험은 입수를 액체 분무형태로 생성하며, 시편이 부식되도록 일정한 양을 분무하고 시험조 내에 균일한 분포를 갖도록 조정할 필요가 있다 본 논문은 연수분무 시험장치의 주요 인자를 바탕으로 실험계획법을 적용하여 시험용액의 분포가 균질하도록 최적의 조건을 찾는 방법을 제시하였다.

• Tribology and Lubricants
• /
• v.16 no.3
• /
• pp.173-181
• /
• 2000

Friction, wear and corrosion characteristics of various MoS$_2$ bonded film lubricants were investigated to apply them to automotive wheel joints. MoS$_2$ bonded film lubricants were formulated by combinations of several additives and binders, and they were coated onto the pre-treated surfaces of specimens. Friction and wear characteristics were evaluated with Falex pin & vee-block test and LFW-1 block-on-ring test. For the corrosion resistant characteristics of the films, salt solution spray corrosion tests were performed. Results showed that MoS$_2$ bonded films containing both inorganic and organic corrosion-resistant additives yielded a synergy effect on anti-corrosion resistance. Also, binders having the better water-proof and thermal stability showed the lower friction and higher corrosion resistance.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2006.05b
• /
• pp.253-256
• /
• 2006

For nuclear concrete structures on the coast, the prevention and management against salt damage is needed because they are being under the influence of the sea water at all times. In general, the deterioration of the concrete is generated in concrete surface firstly and then extended into concrete gradually as its service life increases. Therefore, the protective layer on the concrete surface is needed to establish and manage the durability of concrete. To enhance the durability performance of the existing and new concrete, the development and application of a high-performance penetration sealer is needed. The sealer has to have the functions that are able to prevent the attack of the moisture, carbon dioxide, and harmful substance from the outside. Therefore, the aim of this project is to guarantee the long service-life and waterproof performance of a nuclear concrete structures by increasing the density of the existing and new concrete surface layer, and to enhance the dust-proof performance of the uncoating part of the nuclear safety-relative structures.

• Herbal Formula Science
• /
• v.13 no.2
• /
• pp.141-151
• /
• 2005

From the tuberous root of Aconitum carmichaeli Debx.(Ranunculaceae), the main root is called as common monkhood mother root and the later root is called as the prepared aconite root. From the prepared aconite root. Looking at the processing method of the prepared aconite root, it is divided into Yeombuja (prepared aconite root processed in salt) and heuksoonpyeon (baekbupyeon) following the processing method after removing the soil and this is a way of processing the prepared aconite root without damage it. The recently produced raw prepared aconite root is easily damaged, thus it shall be preserved in salt to have the crystal shape on the surface of the prepared aconite root and store and transport in firmly solidified yeombuja condition. Therefore, yeombuja shall remove the salt before use and requires processing for use but heuksoonpyeon or baekbupyeon may use immediately. For the succession of the unique processing techniques of our ancestors, there has to be studies on the techniques. Prepared aconite root is generally used as holy medicines to cure the yang depletion syndrome, kidney-yang deficiency syndrome, and obstruction of qi in the chest syndrome. However, they are the substances with toxicity. It is contemplated that the contents of processing are broadly understood through the document on the processing method, and based on such foundation, the systematic set and proof on the documents are made along with the addition of the contemporary scientific theory and technology to develop the traditional processing technology to maximize the treatment effect and safety of prepared aconite root. In this study, the historic data and records on the processing method of latteral root of aconitum carmichaeli Debx will be rearranged to contribute to the standardization of medicinal herbs, maximization of efficacy and minimization of the side effects.

• Journal of the Korea Concrete Institute
• /
• v.17 no.4 s.88
• /
• pp.489-498
• /
• 2005

Recently, the deterioration of concrete structures have been increased by the damage from salt, carbonization, freezing & thawing and the others. Therefore, the measures for the deterioration of concretes have been taken. Among them, it has been often used that surface treatment which cut off the deterioration factors of durability by protecting the surface of concrete. The water proof and repair materials for concrete mainly use organic materials such as epoxy, these materials excel in intial bonding force and resistance to chemical agents. But they cause difference in the modulus of elasticity and the rate of shrinkage and expansion of concrete, and thus result in such problems as scaling and spatting in the progress of time. Therefore in this study it develop the performance Improving agent of concrete surface that can block a deterioration cause such as $CO_2$ gas, chloride ion and water from the outside and enhance waterproofing ability by reinforcing the concrete surface when applying it to concrete structures.