• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2006년 창립20주년기념 정기학술대회 및 국제워크샵
• /
• pp.253-256
• /
• 2006

This paper shows the study on application of the law temperature energy in the deep seawater. Deep, cold seawater has long been recognized as a valuable ocean energy resource. Recently, research and experimentation has been conducted on energy systems using deep seawater: deep seawater air conditioning system, ice-making device, salt and fresh-water manufacturing system and the Spray freeze drying system for extracting valuable material of the deep seawater. They are technically and economically feasible today: once installed, the energy is inexhaustible and there are no adverse environmental impacts. Because of the economy of scale in the air conditioning system, the seawater A/C system is most appropriate for supplying multiple buildings or hotels in a coastal area.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2015년도 추계학술대회 논문집
• /
• pp.189-189
• /
• 2015

In this study, the corrosion resistance and adhesion of electrophoretic paint (E-paint) were studied on AZ31 magnesium alloy pretreated in cerium chemical conversion coating solutions with the addition of various ethanol concentrations. It was found that with increasing ethanol concentration from 0 to 90 percent can decrease the formation of $Mg(OH)_2/MgO$ and increase the formation of nano-crystalline cerium oxides on the coating. Both corrosion resistance and adhesion of E-painted AZ31 increased with increasing ethanol concentration. The best E-paint sample was observed on the sample pretreatment in cerium chemical conversion coating solution with the addition of 80 percent of ethanol. This sample showed an excellent adhesion without paint detached after water immersion test for 500 h at $40^{\circ}C$, and only a few blisters observed at the near scratched sites after 1000 h salt-spray test.

• 대한안전경영과학회지
• /
• 제2권3호
• /
• pp.197-210
• /
• 2000

In this paper, sensor ring for antilock brake system was studied using the 400 series ferrite stainless steel powder. Because of more excellent corrosion resistance and mechanical characteristics than iron, sensor ring has been manufactured by P/M(Powder Metallurgy) method 400 series ferrite stainless steel. the results are following. 1, Compared with sensor ring made by iron, 400 series ferrite stainless steel has shown a good corrosion resistance without an addition surface treatment. thus the decreasing production process has been obtained. 2. The products before sintering are much more corrodible in the condition of spray test of salt water and ammonia than humidity and nitrogen condition.

• Corrosion Science and Technology
• /
• 제8권4호
• /
• pp.157-161
• /
• 2009

The corrosion resistance of reinforcing bar was studied to endure the marine environment during shipment. The red rust on the surface did not damage the adherence in the concrete structures, especially in highly alkaline environment, but made the consumer doubt of the quality. The passivation process by alkalization of the quenching water in the tempcore process failed to endure the long shipping period. The ceramic coating by sol-gel process improved the corrosion resistance without damaging the mechanical properties and adherence between concrete and reinfiorcing bar. Optimal concentration of the coating solution and coating temperature were tested. No additional energy was necessary for the coating process by spraying during cooling process, resulting simplified process and low cost. Salt spray test, cyclic corrosion test and atmospheric test were employed to confirm the resistance. The corrosion rates were presented by rating number and polarization resistance. The coating layer was examined by FIB, XRD and SEM etc.

• 대한안전경영과학회지
• /
• 제5권1호
• /
• pp.129-141
• /
• 2003

In this thesis, using the 400 series ferrite stainless steel such as 434LD$_2$ which are furter excellent then the existing ferric products in mechanical characteristics, and experiment has been conducted on corrosion resistance of sensor ring. The results are following. 1. The products before sintering are much more corrodible in the condition of spray test of salt water and ammonia than humidity and nitrogen condition. 2. 434LD$_2$ ferrite stainless steel has shown a good corrosion resistance without an addition surface treatment. thus the decreasing production process has been obtained. 3. As hardness value of $H_{RB}$ 80 and tensile test, 434LD$_2$ ferrite stainless steel with show a good endurance when it is combined to constant velocity joint (c/v joint), and has a good hardness properties endurable to sand and pebble impact.

• 한국해양공학회지
• /
• 제29권6호
• /
• pp.475-480
• /
• 2015

In this study, we developed a Cr-free organic/inorganic hybrid solution and investigated its coating properties on degraded STS316L. Both the OIBD-1 solution and OIBD-2 solution had excellent corrosion resistance and adhesion ability. However, the solution had some problems in a boiling water environment. In addition, the flexibility was excellent, and the scratch resistance was relatively good.

• Tribology and Lubricants
• /
• 제16권3호
• /
• pp.173-181
• /
• 2000

Friction, wear and corrosion characteristics of various MoS$_2$ bonded film lubricants were investigated to apply them to automotive wheel joints. MoS$_2$ bonded film lubricants were formulated by combinations of several additives and binders, and they were coated onto the pre-treated surfaces of specimens. Friction and wear characteristics were evaluated with Falex pin & vee-block test and LFW-1 block-on-ring test. For the corrosion resistant characteristics of the films, salt solution spray corrosion tests were performed. Results showed that MoS$_2$ bonded films containing both inorganic and organic corrosion-resistant additives yielded a synergy effect on anti-corrosion resistance. Also, binders having the better water-proof and thermal stability showed the lower friction and higher corrosion resistance.

• 한국가금학회지
• /
• 제23권4호
• /
• pp.193-201
• /
• 1996

This experiment was carried out to find out the effect of packing methods on physico-chemical properties of breast and thigh meats in chicken, which was dried by air spray chilling method. The chicken carcass was cut into breast and thigh muscles, which were either vacuum packed or atmosphere packed, and stored at -2O˚C for 1, 4, 8, 12 and 16 wk after quick freezing at -45˚C for 35 min. The pH values of atmosphere-packed breast meat and vacuum-packed breast meat after one wk of storage were higher than those of atmosphere-packed thigh meat and vacuum-packed thigh meat(P< .05). The pH values increased as storage period extended, but no significant difference was detected between two packing method(vacuum vs. atmosphere). Total moisture contents of breast meats after one wk of storage were higher than those of thigh meats. The total moisture contents decreased slowly as storage period extended, but no significant difference was detected between two packing method(vacuum vs. atmosphere). The shear force value of thigh meat was higher than that of breast meat. The shear force values of both meats decreased as storage period extended, regardless of packing method. The water soluble protein extractability of thigh meats was higher than that of breast meat, and the water soluble protein extractability of all treatments decreased until 8 wk after storage, but increased gradually after 8 wk of storage period. The salt soluble protein extractability of breast meat was higher than that of thigh meat, and the salt soluble protein extractability of all treatments decreased as storage period extended. With regard to the packing method, the vacuum packing showed higher value than that of atmosphere packing method until 8 wk of storage. Total lipid contents of atmosphere- and vacuum-packed thigh meats at 1 wk of storage were higher than those of breast meats, and the total lipid contents of all of treatments decreased as storage period extended. However, no significant difference was detected between two packing methods. The fatty acid contents of breast and thigh meats were in order of o1eic(33,5~42.4), palmitic(19.7~30.8) and linoleic acid(10.8~17.4).

• 열처리공학회지
• /
• 제15권5호
• /
• pp.213-218
• /
• 2002

In order to develop the economic and environmental water-soluble black coloring agent, some adequate chemical mixtures were mixed and this solution was applied to coat quenched and tempered 51B20 steel bolt. Some basic properties of the solution and characteristics of the coated film in addition to the corrosion resistance were investigated. The developed 100 kg of water-soluble black coloring agent solution was a chemical mixture consisted of 10 kg of aqueous coloring agent, 40 kg of surface active agent, 0.3 kg of anti-foam agent and $50{\ell}$ of water. The coated film of the bolt was composed of hard layer of about $2{\mu}m$ and the disbondable soft layer of about $4{\mu}m$ above the hard layer. Many surface active agents peaks and a few hydrophilic peaks were observed in the coated film. Surface roughness value of the coated bolt was lower than that of the non-coated bolt. Corrosion resistance of the coated bolt considerably improved and also relatively showed a good polarization resistance at test condition of $40^{\circ}C$ colorizing temperature and 5% the solution concentration in 3% NaCl anodic polarization test. Initial appearance time of the surface rust was greatly retarded owing to the coated film in salt spray test.

• 마이크로전자및패키징학회지
• /
• 제26권2호
• /
• pp.1-8
• /
• 2019

금속, 세라믹스, 플라스틱 등 고체의 표면에 적용되는 접착제와 페인트 도장막의 수요와 중요성은 점점 증가하고 있다. 본 연구에서는 금속 피착재에 고분자 재료인 접착제 혹은 페인트 도장막을 적용할 때, 이들 고분자 코팅층과 금속 피착재 사이의 접착강도 측정시 영향인자에 대한 연구를 돌리테스트로 수행하였다. 접착제로는 2액형 에폭시 접착제가 사용되었으며, 페인트로는 방청용 2액형 에폭시 페인트인 EH2350가 사용되었다. 특히, 영향인자로는 피착재의 종류(Al, Fe, STS, Cu, Zn), 표면거칠기 및 표면오염(수돗물, 소금물) 등을 선택해서 접착강도에 미치는 영향에 대해 연구하였다. 접착제와 피착재의 접착강도는 동일한 접착제를 사용해도 피착재의 종류가 달라지면 다르게 나타났으며, 수돗물 혹은 소금물로 산화 오염된 피착재의 표면은 페인트 도장공정 이전에 수돗물로 스프레이 세척이 필수적임을 알았다. 본 연구의 결과로 돌리테스트는 도장막과 피착재의 접착강도를 측정하는데 향후 널리 사용될 수 있음을 확인하였다.