• Nuclear Engineering and Technology
• /
• 제53권3호
• /
• pp.920-926
• /
• 2021

Capsules containing NaCl-MgCl₂ salt with 316L stainless steel or alloy N samples were irradiated in the Ohio State University Research Reactor for 21 nonconsecutive hours. A custom irradiation vessel was designed for this purpose, and details on its design and construction are given. Stainless steel samples that were irradiated during exposure had less corrosive attack than samples exposed to the same conditions without irradiation. Alloy N samples showed no significant effect of irradiation. This work shows a method for conducting in-reactor irradiation-corrosion experiments in static molten salts and presents preliminary data showing that neutron irradiation may decelerate corrosion of alloys in molten chloride salts.

• 한국토양동물학회지
• /
• 제3권1호
• /
• pp.9-16
• /
• 1998

Effects of temperature, pH, and salt concentration on the preservation of the infective juvenile entolopathogenic nematodes, Steinernema carpocapsae, were analyzed. The effects of acclimation to sublethal low temperature and glycerol concentrations on rapid cold hardening of the nematodes were also evaluated to set up the conditions for their cryopreservation. All tested environmental factors could change the storage effectiveness of the nematodes. These analyses indicated that the optinal storage condition for the nematodes consisted of $15^{\circ}C$, pH 8.5, and 0.5-1.0% salt concentration. The nematodes showed a rapid could hardening in response to $5^{\circ}C$ for 2h. Glycerol induced the nematodes to increase the cold hardiness. Its high concentration over 10%, however, gave a harmful effect on the nematode survival.

• Nuclear Engineering and Technology
• /
• 제56권5호
• /
• pp.1738-1746
• /
• 2024

The effect of europium-driven corrosion behavior of Alloy 709 in FLiNaK molten salt was investigated by static immersion tests at 700 ℃. It was found that the corrosion of Alloy 709 increased after the addition of EuF₃, even though the standard reduction potential of Eu(III)/Eu(II) was negative than those of Fe(II)/Fe, Ni(II)/Ni and Cr (II)/Cr. The presence of Eu(III) led to deeper corrosion attack layers and more pits on the steel surface in comparison with corrosion in blank FLiNaK. However, the addition of Eu(III) seemed to have a role in reducing surface cracking that was explored in corrosion by blank FLiNaK, which depended on Eu(III) concentration.

• 한국태양에너지학회 논문집
• /
• 제27권3호
• /
• pp.63-69
• /
• 2007

The heat transfer characteristics of inorganic salt for high temperature heat storage material of solar power system were examined. The inorganic salts employed in this study was a mixture of $NaNO_3$ and $KNO_3$ and the operating temperature range was determined by measuring the melting temperature with DSC and by measuring the thermal decomposition temperature with TGA. The heat transfer characteristics was qualitatively obtained in terms of temperature profiles of salt in the tanks during the heat storage and heat release process as a function of steam flow rates, steam inlet temperature and the inlet position of steam. The effects of steam flow rates and inlet temperature of steam were experimentally determined and the effect of natural convection was observed due to significant density difference with temperature.

• Ocean and Polar Research
• /
• 제26권1호
• /
• pp.33-42
• /
• 2004

Effect of freshwater discharge on the long-term salt balance in the Northern and Central Indian River Lagoon (IRL) is successfully simulated by a new analytical solution to a water balance-based one-dimensional salt conservation equation. Sensitivity tests show that the salinity levels drop abruptly even during the dry season (November to May) due to the high surface runoff discharge caused by tropical storms, depressions, and passage of cold fronts. Increasing surface runoff and direct precipitation has risen by ten times, lowering the salinity level down to 12psu in the Northern Central zone, and to 17 psu in the Northern zone. However, the salinity level in the Southern Central zone has decreased to 25 psu. High sensitivity of the Northern Central zone to freshwater discharge can be partially explained by a rapid urbanization in this zone. During the dry season, less sensitivity of the Southern Central zone to the increased surface runoff is attributed to the proximity of the zone to the Sebastian Inlet and a strong diffusion condition possibly resulting from the seawater intrusion to the surficial aquifer at the Vero Beach. During the wet season, however, the whole study area is highly sensitive to freshwater discharge due to the weak diffusion conditions. High sensitivity of the IRL to the given diffusion conditions guarantees that the fresh-water release occurs during strong wind conditions, achieving both flood control in the drainage basin and a proper salinity regime in the IRL.

• 한국잠사곤충학회지
• /
• 제6권
• /
• pp.28-30
• /
• 1966

현재의 우리나라 장려품종을 공시하여 잠용비중에 의한 자웅분리방법을 조사하였든 바 다음과 같은 몇 가지 결과를 얻었다. 1) 현장려품종의 잠용의 비중은 1,000∼l,100 범위내에 속한다. 2) 식염수의 비중이 1,020전후에서 자용은 저부에 가라앉고 웅용은 상층 즉 식염수 표면가까이 뜬다. 3) 식염수의 비중 1,020전후에서는 잠용에 아무런 악영향이 없었을 뿐만 아니라 발아비율과 산란수에 나쁜 영향을 주지 않았다. 4) 식염수 처리가 보다 광범위한 실용형질에 미치는 영향에 관한 시험은 다음 기회로 미루고 잠견절개기의 고안이 선행되어야 한다.

• Nuclear Engineering and Technology
• /
• 제52권6호
• /
• pp.1131-1136
• /
• 2020

Xenon behaves differently in molten salt reactors (MSRs) compared to solid fuel reactors. This behavior needs exploring due to the large reactivity effect of the ¹³⁵Xe isotope, given the current interest in MSR power plant development for commercial deployment. This paper focuses on select topics in xenon transport, reviews relevant past works, and proposes specific research questions to advance the state of the art in each of the focus areas. Specifically, the paper discusses the issue of xenon solubility in MSRs, the behavior of particulates circulating in MSR fuel salt and its influence on the xenon transport, the possibility of ionization of xenon atoms which changes its effective size and thus affects its mass transport, and finally the issue of circulating void fraction and how it is measured. This work presents specific recommendations for MSR designers to research the limits of Henry's law validity, circulating particulate scrubbers, validity of mass transport coefficients in high radiation fields, and the effects of pump speed on circulating void fraction.

• 한국주조공학회지
• /
• 제34권2호
• /
• pp.60-66
• /
• 2014

A Zr-based amorphous alloy specimen was produced by vacuum die casting process. The salt spray test was carried out using the specimens in the as-cast, $Al_2O_3$ and $ZrO_2$ particle blasted state. Using these specimens, the SEM-EDX and XRD analyses, DSC measurement and bending strength test were conducted. After the salt spray test, the specimens were not experienced phase change and thermal characteristics of the alloys were remained unchanged. In the as-cast specimen, corrosion products were not observed. However, in the $Al_2O_3$ particle blasted specimen, pitting corrosion occurred and the detected corrosion products were $ZrCl_2$ and $NaZrO_3$. Due to the salt spray test, bending strength of the $Al_2O_3$ blasted specimens showed about 100 MPa lower strength than the other specimens. The bending fracture surface was vein pattern which was shown typically in the amorphous alloys.

• 한국축산식품학회지
• /
• 제31권4호
• /
• pp.497-505
• /
• 2011

The objective of this study was to examine the effect of hot-boning and soy sauce as a curing agent on the processing properties of beef jerky. Beef jerky was prepared under the following four treatment conditions; Beef jerky with cold-boned beef and salt solution, beef jerky with cold-boned beef and soy sauce solution, beef jerky with hot-boned beef and salt solution, and beef jerky with hot-boned beef and soy sauce solution. Cured meat and jerky containing hot-boned beef had a significantly higher pH, water holding capacity (WHC), moisture content, Myofibrillar fragmentation index (MFI), processing yields, tenderness, and sensorial scores than samples containing cold-boned beef (p<0.05). Regardless of the raw materials, the jerky containing soy sauce had a significantly lower pH, WHC, moisture content, salt content, TBA, CIE $L^*$ and $b^*-$ values, and significantly higher MFI, mechanical tenderness, and sensorial scores (p<0.05). Based on these findings, we concluded that the use of hot-boned meat and soy sauce was the most effective boning method and curing agent during beef jerky processing.

• Corrosion Science and Technology
• /
• 제5권1호
• /
• pp.27-32
• /
• 2006

One of the critical issues in the coating specification is the allowable limit of surface contaminant(s) - such as soluble salt(s), grit dust, and rust - after grit blasting. Yet, there is no universally accepted data supporting the relationship between the long-term coating performance and the amount of various surface contaminants allowed after grit blasting. In this study, it was attempted to prepare epoxy coatings applied on grit-blasted steel substrate dosed with controlled amount of surface contaminants - such as soluble salt(s), grit dust, and rust. Then, coating samples were subjected to 4,200 hours of cyclic test(NORSOK M-501), which were then evaluated in terms of resistance to rust creepage, blistering, chalking, rusting, cracking and adhesion strength. Additional investigations on the possible damage at the paint/steel interface were carried out using an Electrochemical Impedance Spectroscopy(EIS) and observations of under-film-corrosion. Test results suggested that the current industrial specifications were well matched with the allowable degree of rust, whereas the allowable amount of soluble salt and grit dust after grit blasting showed a certain deviation from the specifications currently employed for fabrication of marine vessels and offshore facilities.