• 한국광학회지
• /
• 제5권1호
• /
• pp.125-130
• /
• 1994

광섬유 레이저의 수동형 모우드록킹을 위한 새로운 공진기 구조를 제안하고 이를 실험하였다. 광섬유 레이저 공진기의 한쪽 끝에는 이색성 평면경을 부착하였으며, 다른쪽 끝은 긴길이의 광섬유 Sagnac loop로 이루어진 비선형 loop mirror로 구성하였다. Er 첨가 광섬유 레이저와 Nd 첨가 광섬유 레이저의 각각의 경우에 대한 모우드록킹의 실험결과를 기술하였다.

• 센서학회지
• /
• 제9권6호
• /
• pp.416-423
• /
• 2000

Sagnac 간섭계를 이용한 광섬유 음향 센서에서 음향 신호를 간단하면서도 효과적으로 복조할 수 있는 이중위상 천이 신호처리 기법을 제안하고 실험을 통하여 그 특성을 검증하였다. 이 기법을 사용하여 기존의 ${\pi}/2$ 위상 바이어스 복조 방식이 갖는 동적 범위의 이론적 한계를 근본적으로 제거하였다. 이 기법은 고주파의 위상 변조를 하지 않으므로 간단한 전자 회로만으로도 음향 신호의 복조가 가능하다. 또한 디지털 신호처리에 적합하며 다른 간섭계에도 적용이 가능하다.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제53권1호
• /
• pp.15-19
• /
• 2004

In this paper, we present the fabrication and characteristic analysis of Sagnac interferometric optical fiber senior(OFS) system for detecting pulsed ultrasonic signal in underwater. The hollow cylindrical mandrel wound round by single mode optical fiber is used as sensing component. The ultrasonic signal source is simulated by the PZT actuator operated by an function generator. The distance dependency of the OFS's sensitivity was measured. The sensitivity has been shown to be inversely propotional to the square-root of distance between ultrasonic source and sensing component. It has also been shown that the OFS could detect the signals less affected by ultrasonic path comparing to conventional acousto-electric sensor. and accurate location of ultrasonic signal could be carried out using two OFSs.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제49권11호
• /
• pp.622-626
• /
• 2000

In this paper, an optical fiber sensor(OF sensor) utilizing the principal of Sagnac interferometer was proposed to detect the discharge signals. The needle-sphere electrode system in insulating oil generated the signals. The performance of OF sensor was checked by sinusoidal calibration signal generated by PZT actuator at 198KHz. The detected discharge signals consisted of acoustic signal and the electrical noise. The noise signal could be removed by digital low pass filter. It was demonstrated that the OF sensor in this research had a possibility to detect the discharge signals in power apparatus.

• 한국정밀공학회지
• /
• 제21권5호
• /
• pp.142-148
• /
• 2004

In this paper, to detect exciting frequency on the latticed fence structure, fiber optic sensor using Sagnac interferometer was fabricated and tested. The latticed structure fabricated with dimension of 180 cm wide and 180 cm high, the optical fiber, 50 m in length, distributed and fixed on the latticed structure. Single mode fiber, a laser with 1,550 m wavelength, and $3{\times}3$ coupler were used. Excited vibration signal applied to the latticed structure from 200 Hz to 1 KHz. The detected optical signals were compared to the detected acceleration signals and analyzed on the time and frequency domain. Based on the experimental results, fiber optic sensor using Sagnac interferometer detected exciting frequency, effectively. This system can be applied to the structural health monitoring system.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2004년도 하계학술발표회
• /
• pp.214-215
• /
• 2004

• 한국광학회:학술대회논문집
• /
• 한국광학회 2006년도 하계학술발표회 논문집
• /
• pp.141-142
• /
• 2006

• 대한전자공학회논문지SD
• /
• 제38권10호
• /
• pp.706-711
• /
• 2001

본 논문에서는 Mach-Zehnder 변조기가 포함된 Sagnac 간섭기를 이용한 간단한 색분산 측정 방식을 제안하고, 제한한 시스템의 등가모델과 등가 전달함수를 유도하였다. 색분산은 2.235km 길이의 광섬유의 이용하여 측정하였으며 이론적인 값과 1500nm에서 1580nm의 파장 범위에서 매우 잘 일치함을 확인하였다.

• 조명전기설비학회논문지
• /
• 제26권2호
• /
• pp.44-50
• /
• 2012

When the fiber Bragg gratings are embedded in a fiber-optic Sagnac loop for measuring temperature or strain, it is difficult to separate the Bragg wavelengths. The transmitted light is mixed with the reflected Bragg wavelengths in the photo-detector, working as noises. To suppress the noises, we placed the FBG sensors and a fiber-optic attenuator at asymmetric positions in the loop. With the arrangement the reflected light became much bigger than the transmitted light, enabling the separation of the reflected Bragg wavelengths with almost the same signal-to-noise ratio of the FBG sensors outside the loop.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 추계학술대회논문초록집
• /
• pp.329.1-329
• /
• 2002

To detect external vibration signals on the latticed fence structure, distributed fiber optic sensor using Sagnac interferometer was fabricated and tested. The latticed structure fabricated with dimension of 170cm in width and 180cm in height, the optical fiber, 50m in lengtn, distributed and fixed on the latticed structure. It was verified the sensitivity of the Sagnac interferometer using the PZT phase modulator. Fiber-optic external vibration signal applied to the latticed structure from 100㎐ to several ㎑. (omitted)