• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.31 no.1
• /
• pp.55-59
• /
• 2005

Purpose : This study is to predict the changes of the distal segment by investing the resorption of the excessive distal segment regarding the amount of setback after BSSRO. Material and Methods : 20 patients with Mandible prognathism treated by Obwegeser-Dal Pont method during the years 2000 to 2002 were selected for this study. Group A consisted of 5 males & 5 females with a setback amount of 10mm and above(Mean $10.80mm{\pm}1.03$, n=20) and Group B consisted of 2 males & 8 females with a setback amount of below 10mm.(Mean $6.10mm{\pm}1.10$, n=20) Panorama X-ray was taken at day 1, 1month, 3months, 6months, and 12months after the surgery. Resorption areas of excessive distal segment were measured on these panorama X-rays and compared. Results : There was bone resorption in both groups. Group A showed more bone resorption than Group B. Group B showed slightly higher resorption rate than Group A. However, there was no statistically significant difference between the resorption rates of Group A and Group B. (P>0.05). Conclusion : More bone resorption occurred with a larger amount of setback and about one third of the excessive distal segment underwent resorption, irrespective of the amount of setback.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.40
• /
• pp.36.1-36.5
• /
• 2018

Background: Botulinum toxin-A (BTX-A) injection into muscle reduces muscular power and may prevent post-operative complication after orthognathic surgery. The purpose of this study was (1) to evaluate BTX-A injection into the masseter muscle on the prevention of plate fracture and (2) to compare post-operative relapse between the BTX-A injection group and the no injection group. Methods: Sixteen patients were included in this study. Eight patients received BTX-A injection bilaterally, and eight patients served as control. All patients received bilateral sagittal split ramus osteotomy for the mandibular setback and additional surgery, such as LeFort I osteotomy or genioplasty. Post-operative plate fracture was recorded. SNB angle, mandibular plane angle, and gonial angle were used for post-operative relapse. Results: Total number of fractured plates in patients was 2 out of 16 plates in the BTX-A injection group and that was 8 out of 16 plates in the no treatment group (P = 0.031). However, there were no significant differences in post-operative changes in SNB angle, mandibular plane angle, and gonial angle between groups (P > 0.05). Conclusions: BTX-A injection into the masseter muscle could reduce the incidence of plate fracture.

• The korean journal of orthodontics
• /
• v.49 no.1
• /
• pp.59-69
• /
• 2019

In this report, we describe a case involving a 34-year-old woman who showed good treatment outcomes with long-term stability after multidisciplinary treatment for unilateral cleft lip and palate (CLP), maxillary hypoplasia, severe maxillary arch constriction, severe occlusal collapse, and gingival recession. A comprehensive treatment approach was developed with maximum consideration of strong scar constriction and gingival recession; it included minimum maxillary arch expansion, maxillary advancement by distraction osteogenesis using an internal distraction device, and mandibular setback using sagittal split ramus osteotomy. Her post-treatment records demonstrated a balanced facial profile and occlusion with improved facial symmetry. The patient's profile was dramatically improved, with reduced upper lip retrusion and lower lip protrusion as a result of the maxillary advancement and mandibular setback, respectively. Although gingival recession showed a slight increase, tooth mobility was within the normal physiological range. No tooth hyperesthesia was observed after treatment. There was negligible osseous relapse, and the occlusion remained stable after 5 years of post-treatment retention. Our findings suggest that such multidisciplinary approaches for the treatment of CLP with gingival recession and occlusal collapse help in improving occlusion and facial esthetics without the need for prostheses such as dental implants or bridges; in addition, the results show long-term post-treatment stability.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.37
• /
• pp.36.1-36.7
• /
• 2015

Background: This study was performed to evaluate three-dimensional positional change of the condyle using three-dimensional computed tomography (3D-CT) following unilateral sagittal split ramus osteotomy (USSRO) in patients with mandibular prognathism. Methods: This study examined two patients exhibiting skeletal class III malocclusion with facial asymmetry who underwent USSRO for a mandibular setback. 3D-CT was performed before surgery, immediately after surgery, and 6 months postoperatively. After creating 3D-CT images by using the In-vivo $5^{TM}$ program, the axial plane, coronal plane, and sagittal plane were configured. Three-dimensional positional changes from each plane to the condyle, axial condylar head axis angle (AHA), axial condylar head position (AHP), frontal condylar head axis angle (FHA), frontal condylar head position (FHP), sagittal condylar head axis angle (SHA), and sagittal condylar head position (SHP) of the two patients were measured before surgery, immediately after surgery, and 6 months postoperatively. Results: In the first patient, medial rotation of the operated condyle in AHA and anterior rotation in SHA were observed. There were no significant changes after surgery in AHP, FHP, and SHP after surgery. In the second patient, medial rotation of the operated condyle in AHA and lateral rotation of the operated condyle in FHA were observed. There were no significant changes in AHP, FHP, and SHP postoperatively. This indicates that in USSRO, postoperative movement of the condylar head is insignificant; however, medial rotation of the condylar head is possible. Although three-dimensional changes were observed, these were not clinically significant. Conclusions: The results of this study suggest that although three-dimensional changes in condylar head position are observed in patients post SSRO, there are no significant changes that would clinically affect the patient.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.22 no.2
• /
• pp.184-190
• /
• 2000

Objective : To compare two different methods of rigid fixation in postoperative stability after mandibular setback. Material and Methods : 28 patients with Class III malocclusion were treated by bilateral sagittal split ramus osteotomy(BSSRO) and mandibular setback were selected for this study. Group A(n=14) had the bone segments fixed with monocortical miniplate on the lateral side of the mandibular body and Group B(n=14) had three noncompressive bicortical screw inserted at the genial area through a transcutaneous approach. Cephalograms were taken preoperatively, postoperatively within 1 weeks and at a follow-up period (mean 8.9 months after surgery) and the amount of setback and postoperative change were measured. Results : Postoperative relapse between two groups was minimal in setback of the mandible. Statistical analysis showed no significant difference in postoperative relapse. Conclusion : This study suggests that both methods of skeletal fixation investigated give comparable postoperative stability and their use in mandibular setback appears to be a fairly stable clinical procedure .

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.32 no.2
• /
• pp.132-140
• /
• 2010

Purpose: The aim of this study is to identify the usefulness of unilateral mandibular angle ostectomy, so-called "Lateral Angle Reduction", in asymmetric prognathism patients by the assessment of postoperative stability and esthetic results Patients and methods: For the retrospective study, 10 skeletal class III mandibular asymmetry patients who were performed SSRO and unilateral mandibular angle ostectomy, Lateral Angle Reduction, was selected. Lateral and posterioanterior cephalogram was taken before surgery (T0), 1day after surgery (T1) and 6month after surgery (T2). To know the esthetic results the facial width and lateral facial contour were examined on posterioanterior cephalogram and to know the postoperative stability B point and Incisor inferius was examined on lateral cephalogram. Statistical analysis was performed. Results: From T0 to T1, Intergonial width was significantly decreased, dominantly at shortened side but no significant changes at lengthened side. Those were well-maintained during 6 months. Lateral facial angle and Ramus angle was significantly decreased on only shortened side from T0 to T1. As a result, after surgery, there were no significant differences in all measurements between shortened side and lengthened side. Ramus deviation angle in shortened side and ramus angle in lengthened side which reflect the angulation of ramus on frontal plane didn't show significant changes after surgery and during postsurgical periods. Lower dental midline showed no statistical changes during postsurgical period. The relapse rate on B-point was 11.92%. Conclusion: Unilateral "Lateral angle reduction" in the asymmetric mandible is valuable to obtain the narrow lower face and symmetric facial contour with a good stability.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.28 no.2
• /
• pp.126-131
• /
• 2002

Anatomical shape of the mandibular ramus, which includes the area from the rear of the mandibular second molar to the mandibular posterior border and from the mandibular sigmoid notch to the inferior mandibular border, must be carefully considered to perform orthognathic surgery. The locations of the lingula and mandibular foramen in medial side of mandibular ramus are one of the most important factors to decide the location of the horizontal medial osteotomy in sagittal split ramus osteotomy and to select the line of vertical osteotomy in intraoral vertical ramus osteotomy. Sixty-five different Korean human dry mandibles were surveyed. All mandible have permanent dentition including complete eruption of the mandibular second molar. The locations of the lingula and mandibular foramen in medial side of the ramus were identified and following results were obtained. Anterior ramal horizontal distance from lingula was $16.13{\pm}3.53mm(range:8.6{\sim}24.3mm)$, anterior ramal horizontal distance from mandibular foramen was $23.91{\pm}4.79mm(range: 14.1{\sim}39.7mm)$, horizontal width of mandibular foramen was $2.79{\pm}0.95mm(range:1.5{\sim}6.1mm)$, height of lingula was $10.51{\pm}3.84mm(range:3.1{\sim}22.4mm)$, vertical distance from sigmoid notch to lingula was $19.82{\pm}5.11mm(range:9.1{\sim}35.3mm)$. From this study, the result could be used to select the location of osteotomy lines and to decide amount of periosteal elevation to avoid injury of neurovascular bundle, and to accomplish the appropriate split in Korean patients in mandibular orthognathic surgery.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.30 no.3
• /
• pp.232-240
• /
• 2008

Purpose: This study was performed to evaluate transverse changes of proximal segment after bilateral sagittal split ramus osteotomy (BSSRO) using 3-D CT in mandibular prognathism. Patients and methods: Twenty-two patients who underwent BSSRO for mandibular set-back in class III malocclusion without facial asymmetry were examined. Miniplates were used for the fixation after BSSRO. Facial CT was taken before and after BSSRO within 3 months. Frontal-ramal inclination (FRI), inter-gonial width (IGW) and intercondylar width (ICW) were measured in 3-D CT images using V-works $4.0^{TM}$ program. Student t-test was used to compare the changes between pre- and post-operative measurements using SPSS 10.0 program. Results: 1. Mean peroperative FRI value ($12.87{\pm}3.43^{\circ}$) was slightly increased to postoperative value ($14.13{\pm}3.72^{\circ}$) (p < 0.05). The average FRI increased 10.42% and the range was from $-2.46^{\circ}$ to $3.34^{\circ}$. 2. Mean peroperative IGW ($99.01{\pm}5.36$) was slightly decreased to postoperative IGW ($96.51{\pm}5.88mm$) (p < 0.05). The average IGW decreased 2.52 % and the range was from $-6.61^{\circ}$ to 0.91 mm. 3. Mean preoperative ICW ($125.01{\pm}5.30mm$) was slightly decreased to postoperative ICW ($125.40{\pm}5.45mm$) (p < 0.05). There is no significant difference between pre- and post-operative ICW. 4. There was significant correlationship between FRI difference and IGW difference (p < 0.05). Conclusions: These results indicate that the lower ramus of the proximal segment is moved inward after BSSRO procedure for mandibular set-back.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.33 no.3
• /
• pp.276-280
• /
• 2011

BSSRO (bilateral sagittal split ramus osteotomy) is an effective surgical method for maxillofacial deformities. Rigid fixation using a plate and screws can stabilize bony segments and induce early mouth opening. Though this procedure has a low complication rate, normal function and esthetic recovery is achieved through proper and early management of the complications. Complications consisting of temporomandibular disorders, sensory disturbances due to inferior alveolar nerve damage, open bite, malunion or nonunion, and facial nerve palsy occur, but these rarely develop. Facial nerve palsy causes the muscles involved in facial expression to depress, which results in ocular dryness or retinal damage. When facial nerve palsy develops, early management involving steroid medication and physical therapy is effective. In the case of severe damage, surgical intervention should be considered. A 20-year-male patient came to the oral and maxillofacial surgery department for orthognathic surgery. The mandible was set back by BSSRO under general anesthesia. Facial nerve palsy was observed on the left side of the face: steroid and vitamins were administered early and physical therapy was performed daily. These forms of management can aid in function and allow for gradual esthetic recovery. Presumed causes were excessive soft tissue retraction or soft tissue injury by the osteotome at the horizontal osteotomy of the ramus. Careful dissection, retraction and a precise osteotomy are needed for protection of the facial nerve. If nerve damage is observed, early management can help in the recovery of facial nerve function and esthetics.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.35 no.5
• /
• pp.316-323
• /
• 2009

Purpose: This study was performed to evaluate three-dimensional positional change of the condyle using 3D CT after bilateral sagittal split ramus osteotomy (BSSRO) in skeletal class III patients. Patients and methods: Nine patients who underwent BSSRO for mandibular set-back in skeletal class III malocclusion without facial asymmetry were examined. Miniplates were used for the fixation after BSSRO. 3-D CT was taken before, immediately after, and 6 months after undergoing BSSRO. After creating 3D-CT images using V-works $4.0^{TM}$ program, axial plane, coronal plane, & sagittal plane were configured. Three dimensional positional change, from each plane to the condyle, of the nine patients was measured before, immediately after, and 6 months after undergoing BSSRO. Results: 1. The mean value of mandibular set-back for nine mandibular prognathism patients was 7.36 mm (${\pm}\;2.42\;mm$). 2. In the axial view, condyle is rotated inward immediately after BSSRO (p < 0.05), comparing with preoperative but outward 6 months after BSSRO comparing with postoperative (p < 0.05). 3. In the axial view, condyle is moved laterally immediately after BSSRO (p < 0.05), comparing with preoperative but regressed 6 months after BSSRO comparing with preoperative (p > 0.05). 4. In the frontal & coronal view, there is changed immediately after and 6 months after BSSRO, comparing with preoperative but no statistical difference. Conclusion: These results indicate that three-dimensional positional change of the condyle in skeletal class III patients is observed lateral displacement & inward rotation immediate after BSSRO, but the condyle in 6 months after BSSRO tends to regress to preoperative position.