• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.35 no.10
• /
• pp.1205-1210
• /
• 2011

Spinal instability known to be related to low back pain. However, the quantitative definition of spinal instability has not been established because there is a lack of consensus regarding clinical and radiological studies. In addition, the major factors affecting such instability have not been elucidated, although disc degeneration, disc injury, ligament injury, and isthmic defects are considered to result in such problems. In this study, individual and combined influences on spinal instability with a three-dimensional finite element model of a one-level lumbar spinal motion segment were investigated, under the assumption that the rotation and translation in the sagittal plane under flexion and extension represented the instability indices. The results could be helpful in understanding the causes and mechanisms of spinal instability in the lumbar spine.

• International Journal of Control, Automation, and Systems
• /
• v.4 no.3
• /
• pp.325-332
• /
• 2006

The dynamic responses of human standing postural control were investigated when subjects were exposed to long-term horizontal vibration. It was hypothesized that the motion of standing posture complexity mainly occurs in the mid-sagittal plane. The motor-driven support platform was designed as a source of vibration. The AC Servo-controlled motors produced anterior/posterior (AP) motion. The platform acceleration and the trunk angular velocity were used as the input and the output of the system, respectively. A method was proposed to identify the complexity of the standing posture dynamics. That is, during AP platform motion, the subject's knee, hip and neck were tightly constrained by fixing assembly, so the lower extremity, trunk and head of the subject's body were individually immovable. Through this method, it was assumed that the ankle joint rotation mainly contributed to maintaining their body balance. Four subjects took part in this study. During the experiment, the random vibration was generated at a magnitude of $0.44m/s^2$, and the duration of each trial was 40 seconds. Measured data were estimated by the coherence function and the frequency response function for analyzing the dynamic behavior of standing control over a frequency range from 0.2 to 3 Hz. Significant coherence values were found above 0.5 Hz. The estimation of frequency response function revealed the dominant resonance frequencies between 0.60 Hz and 0.68 Hz. On the basis of our results illustrated here, the linear model of standing postural control was further concluded.

• Journal of rehabilitation welfare engineering & assistive technology
• /
• v.7 no.1
• /
• pp.21-27
• /
• 2013

Manual wheelchair propulsion can lead to pain and injuries of users due to mechanical inefficiency of wheelchair propulsion motion. The kinetic analysis of the upper limbs during manual wheelchair propulsion needs to be studied. A two dimensional inverse dynamic model of upper limbs was developed to compute the joint torque during manual wheelchair propulsion. The model was composed of three segments corresponding to upper arm, lower arm and hand. These segments connected in series by revolute joints constitute open chain mechanism in sagittal plane. The inverse dynamic method is based on Newton-Euler formalism. The model was applied to data collected in experiments. Kinematic data of upper limbs during wheelchair propulsion were obtained from three dimensional trajectories of markers collected by a motion capture system. Kinetic data as external forces applied on the hand were obtained from a dynamometer. The joint rotation angles and joint torques were computed using the inverse dynamic model. The developed model is for upper limbs biomechanics and can easily be extended to three dimensional dynamic model.

• Journal of Oral Medicine and Pain
• /
• v.25 no.1
• /
• pp.99-108
• /
• 2000

This study was performed to investigate the effect of suboccipital stretch on the head and neck posture and the electromyographic(EMG) activity of some cervical muscles. For this study, 39 patients with temporomandibular disorders(TMD) and 34 dental students without any signs and symptoms in the masticatory system were selected as the patients group and as the normal group, respectively. Head position by goniometer CROM$^{(R)}$(Performance attainment, St. Paul, USA), EMG activity by BioEMG$^{(R)}$(Bioresearch Inc., Milwaukee, USA), and craniocervical posture by cephaloradiography were observed in both natural head posture(NHP) and head posture with suboccipital stretch(tuck posture) abtained from slight posteroinferior finger pressure on the chin. Variables measured on the cephaloradiograph were SN angle, atlas angle, CVT angle, occiput-atlas and atlas-axis distance, and pharyngeal width. The data obtained were analysed by SPSS windows program and the results of this study were as follows : 1. In the sagittal plane, degree of anterior rotation of the head by suboccipital stretch was 6.3 in the patients group, and 6.2 in the normal group, respectively. So there was no significant difference between the two groups for degree of anterior rotation, but the position of the head in the patients group were more posteriorly extended than in the normal group in both NHP and tuck posture. 2. EMG activity of the stemocleidomastoideus in the patients group, and that of the upper trapezius and the sternocleidomastoideus in the normal group were increased by suboccipital stretch. The range of EMG activity, however, in these cervical muscles were 1.6 -2.3)u.V. 3. Cephalometric variables such as SN angle, atlas angle, CVT angle, occiput-atlas and atlas-axis distance except pharyngeal width were generally increased by suboccipital stretch. There was some difference, however, in results between the two groups. Atlas angle was not changed in the patients group whereas CVT angle was not changed in the normal group. 4. The distance from subocciput to spinous process of axis was significantly increased as much as 3.0mm in the patients group, and 3.7mm in the normal group by suboccipital stretch.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.37 no.6
• /
• pp.457-463
• /
• 2011

Introduction: This study evaluate the soft tissue changes to the upper lip and nose after Le Fort I maxillary posterosuperior rotational movement. Materials and Methods: Twenty Skeletal class III patients, who had undergone bimaxillary surgery with a maxillary Le Fort I osteotomy and bilateral sagittal split ramus osteotomy, were included in the study. The surgical plan for maxilla was posterosuperior rotational movement, with the rotation center in the anterior nasal spine (ANS) of maxilla. Soft and hard tissue changes were measured by evaluating the lateral cephalograms obtained prior to surgery and at least 6 months after surgery. For cephalometric analysis, four hard tissue landmarks ANS, posterior nasal spine [PNS], A point, U1 tip), and five soft tissue landmarks (pronasale [Pn], subnasale [Sn], A' Point, upper lip [UL], stomion superius [StmS]) were marked. A paired t test, Pearson's correlation analysis and linear regression analysis were used to evaluate the soft and hard tissue changes and assess the correlation. A P value <0.05 was considered significant. Results: The U1 tip moved $2.52{\pm}1.54$ mm posteriorly in the horizontal plane (P<0.05). Among the soft tissue landmarks, Pn moved $0.97{\pm}1.1$ mm downward (P<0.05), UL moved $1.98{\pm}1.58$ mm posteriorly (P<0.05) and $1.18{\pm}1.85$ mm inferiorly (P<0.05), and StmS moved $1.68{\pm}1.48$ mm posteriorly (P<0.05) and $1.06{\pm}1.29$ mm inferiorly (P<0.05). The ratios of horizontal soft tissue movement to the hard tissue were 1:0.47 for the A point and A' point, and 1:0.74 for the U1 tip and UL. Vertically, the movement ratio between the A point and A' point was 1:0.38, between U1 tip and UL was 1:0.83, and between U1 tip and StmS was 1:0.79. Conclusion: Posterosuperior rotational movement of the maxilla in Le Fort I osteotomy results in posterior and inferior movement of UL. In addition, nasolabial angle was increased. Nasal tip and base of the nose showed a tendency to move downward and showed significant horizontal movement. The soft tissue changes in the upper lip and nasal area are believed to be induced by posterior movement at the UL area.

• The korean journal of orthodontics
• /
• v.36 no.6
• /
• pp.412-421
• /
• 2006

Objective: The result of finite element analysis depends on material properties, structural expression, density of element, and boundar or loading conditions. To represent proper elastic behavior, a finite element model was made using Hounsfield unit (HU) values in CT images. Methods: A 13 year 6 month old male was used as the subject. A 3 dimensional visualizing program, Mimics, was used to build a 3D object from the DICOM file which was acquired from the CT images. Model 1 was established by giving 24 material properties according to HU. Model 2 was constructed by the conventional method which provides 2 material properties. Protraction force of 500g was applied at a 45 degree downward angle from Frankfort horizontal (FH) plane. Results: Model 1 showed a more flexible response on the first premolar region which had more forward and downward movement of the maxillary anterior segment. Maxilla was bent on the sagittal plane and frontal plane. Model 2 revealed less movement in all directions. It moved downward on the anterior part and upward on the posterior part, which is clockwise rotation of the maxilla. Conclusion: These results signify that different outcomes of finite element analysis can occur according to the given material properties and it is recommended to use HU values for more accurate results.

• The korean journal of orthodontics
• /
• v.30 no.2 s.79
• /
• pp.261-272
• /
• 2000

Severe skeletal anteroposterior and vertical discrepancy is difficult to obtain satisfactory result by only orthodontic treatment, and much anteroposterior movement and treatment stability require orthodontic treatment with orthognathic surgery. The treatment goal of mandibular prognathic patients is to promote the function of stomatognathic system including mastication and phonetics, to improve the esthetics of facial profile and to maintain stability. Positional changes of hyoid bone, pharynx and tongue were seen with mandibular movement after orthognathic surgery. This study was performed to observe the changes of perimandibular tissues of orthodontic patients with skeletal mandibular prognathism who treated with orthodontic treatment, and the changes of hyoid bone, pharyx and tongue by relapse or recurrance after before and after orthognathic surgery and retention. The 22 patients who had mandibular prognathism were selected. They treated with orthodontic treatment with sagittal split ramus osteotomy as orthognathic surgery. And lateral cephalometric radiographs were taken 3 times : pre-surgery (T1), immediate post-surgery (T2) and 2 years alter retention (T3). The results were as follows : 1. The hyoid bone returned back after clockwise rotation to maxilla and occlusal plane during retention (P<0.01). 2. The hyoid bone moved posterior-inferiorly by mandibular surgery and returned back anterior-superior after retention. (P<0.01) 3. The changes of pharyngeal depth showed a little decrease at upper area in post- surgery, but it was not a significant difference generally through before, after and retention. 4. In relating to tongue base, the angle of tongue base was decreased and the dorsal area of tongue base moved to inferior-posterior direction and to superior direction again after retention (P<0.01). 5. Related to the thickness of upper and lower lip, the thickness of upper lip decreased after surgery, and the soft tissues below lower lip increased after surgery and decreased after retention.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.24 no.2
• /
• pp.213-230
• /
• 2008

The aim of this study was to analyze the initial movement and the stress distribution of each tooth and periodontal ligament during the lingual lever-arm retraction of 6 maxillary incisors using FEA. Two kinds of finite element models were produced: 2-properties model (simple model) and 24-properties model (multi model) according to the material property assignment. The subject was an adult male of 23 years old. The DICOM images through the CT of the patient were converted into the 3D image model of a skull using the Mimics (version 10.11, Materialise's interactive Medical Image Control System, Materialise, Belgium). After series of calculating, remeshing, exporting, importing process and volume mesh process was performed, FEA models were produced. FEA models are consisted of maxilla, maxillary central incisor, lateral incisor, canine, periodontal ligaments and lingual traction arm. The boundary conditions fixed the movements of posterior, sagittal and upper part of the model to the directions of X, Y, Z axis respectively. The model was set to be symmetrical to X axis. Through the center of resistance of maxilla complex, a retraction force of 200g was applied horizontally to the occlusal plane. Under this conditions, the initial movements and stress distributions were evaluated by 3D FEA. In the result, the amount of posterior movement was larger in the multi model than in the simple model as well as the amount of vertically rotation. The pattern of the posterior movement in the central incisors and lateral incisors was controlled tipping movement, and the amount was larger than in the canine. But the amount of root movement of the canine was larger than others. The incisor rotated downwardly and the canines upwardly around contact points of lateral incisor and canine in the both models. The values of stress are similar in the both simple and multi model.