• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.38 no.4
• /
• pp.307-316
• /
• 2002

In order to evaluate the deformation and stiffness of frame structure for fishery, composed of unit platforms which made of two concentric high density polyethylene buoys fixed by clamps and belts and rubber hinge components, under wave, the structural analysis for the square type of the structure was carried out by using finite element methods. The accurate physical properties of rubber hinge components determined by material tests were an important parameter to evaluate more reliable structural stability for the structure. The idealization to beam element with equivalent stiffness and rubber element with linearity for rubber hinges was necessary for the modeling of rubber component which has hyper-elastic characteristics. In addition, it was shown that the structural response of the structure under wave was larger in the hogging condition than that of in the still water or in the sagging condition.

• Journal of Fashion Business
• /
• v.22 no.2
• /
• pp.27-39
• /
• 2018

This study analyzed the body shape of women over 70 years and classified their body shapes in order to provide basic data for the development of pants patterns that can complement the weakness of the body shape of elderly women. It were analyzed using SPSS Ver. 20.0. Five factors were extracted from the lower body: obesity and thigh thickness, lower body length, under knee thickness, ankle height, and hip sag. In type 1, the lower body was obese and the legs were thick, but the hips were not sagging. It was named 'high-hip obesity figure'. Type 2's abdomen, hip, and waist were obese, but the legs were thin and the hip were not sagging. Thus, 'bird-leg middle obesity figure' was the name. Type 3 had a long and slender lower body, but legs were thick and the hips were saggy, it was named 'strong-leg low-hip slender figure'. The elderly women showed less difference in waist, abdomen, and hip circumference. The abdominal circumference was 2-3cm more than the waist and hip circumference; hence there is a need to differentiate the shape and number of darts in the production of bottom-wear patterns for older women. In addition, the leg circumference is gradually reduced by aging compared to the size of the lower body. Therefore, it would be necessary to search for a method that can effectively design the difference between the hip circumference and the leg circumference in relation to the body shape and the aesthetics of older women.

• Journal of the Korea Society of Computer and Information
• /
• v.23 no.4
• /
• pp.121-129
• /
• 2018

The purpose of this study is to provide a basic data of clothing development which can improve the satisfaction of the body shape by examining the subjective evaluation and type characteristics of the old-old women themselves. Q methodology was used for the study of subjectivity. The types of the body shape of the old-old women were analyzed as five types: bent body with protruding abdomen, backward bent body with slender legs, inverted triangle, swollen cylinder, triangle. The bent body with protruding abdomen had a bent back and waist. They were recognized that the bust and shoulders were sagging and abdomen was protruding. The backward bent body with slender legs was the smallest of the five types with a BMI index and shoulders and bust were sagging. And knee and waist were bent and legs were thin. The inverted triangular shape showed the highest BMI index among the 5 types, indicating that it is obese. They thought that the upper body was developed and the lower body and legs were slender. The swollen cylinder shape was analyzed to be the smallest and the most fat body. The triangle shape had developed lower body and bent back and waist. It is considered that a design consideration is needed to cover the disadvantages of the body shape in consideration of not only wearing feeling but also aesthetic part when making clothes. By making ergonomic garments considering the characteristics of body shape, it can be expected to change the body shape due to the wearing of clothing that is not suitable for body shape and the effect on physical health in a positive direction.

• Journal of the Korean Ceramic Society
• /
• v.36 no.8
• /
• pp.791-798
• /
• 1999

The preparation method of yttria-stabilized zirconia(YSZ) thin film for an anode support type solid oxide fuel cell(SOFC) by electrophoretic deposition(EPD) and dip-coating was studied. And the difference in both preparation method was investigated through basic understanding of processing parameters which may significantly affect weight microstruxcture and defect of film. In dip-coating the thickness of film increased with time until 30 s and then the weight of film decreased with time due to particle falling off from the coagulated film. In EPD although the weight of film increased with time and applied constant-current sagging of the film was observed when the applied current was less that 0.035 mA/$cm^2$ and more than 120 s. Since YSZ thin film by EPD on porous substrate was dense smooth and homogeneous it was expected to be suitable for the electrolyte of an anode support type SOFC.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.25 no.6
• /
• pp.185-192
• /
• 2021

In this study, Full-scale hollow slab Mock-up with VPS(Void Plywood Slab System) was produced. Through Mock-up, the safety of the flat plate hollow slab against short-term sagging and long-term sagging is to be evaluated. The hollow rate of the mock-up specimen to which the hollow core slab was applied was designed to be 24%. When loading through concrete blocks, the most central part of the slab was deflection 8.88mm when loading. However, it shows a safe value compared to the reference value (l_n/240=17.93mm) for short-term deflection. As a result of 3 months of measurement of the mock-up experiment, the deflection at the center of the slab increased by 6.792mm from the initial deflection. In addition, it was found that the reference value by the load used suggested by KBC2016 was satisfied.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.26 no.3
• /
• pp.1-10
• /
• 2022

For the composite section of corrugated steel sheet and concrete, which is often used in soil structures, a conservative design method based on the ultimate strength state is still applied due to the difficulty of the analysis of compatibility condition. In this study, plastic analysis was performed on the flexural and axial strength of the composite section using two limit state design methods, LRFD and LSD. As a result of the analysis of the experimental results, the LRFD analysis value was interpreted as a conservative results for compressive strength, and it was analyzed that the effect of the concrete compressive strength was greater than the steel ratio of the steel plate. The flexural strength was analyzed to be in good agreement with the experimental results by the LSD analysis. From the parametric analysis on the design variables, the hogging moment, which is affected by the tensile strength of the steel plate, slightly decreased the increasing rate of the strength due to the influence of the bolts connection, but the sagging moment linearly increased according to the increment of steel reinforcement ratio.

• Journal of Korean Neurosurgical Society
• /
• v.46 no.5
• /
• pp.501-504
• /
• 2009

Remote cerebellar hemorrhage (RCH) is rare but potentially lethal as a complication of spinal surgery. We recently experienced a case of RCH in a 61-year-old man who showed mental deterioration after lumbar spinal surgery. There was dural tearing with subsequent cerebrospinal fluid (CSF) loss during the surgery. Brain computed tomography scan revealed cerebellar hemorrhage, 3rd and 4th ventricular hemorrhage and pneumocephalus. He underwent suboccipital craniectomy and hematoma removal. The most important pathomechanism leading to RCH after spinal surgery has been known to be venous bleeding due to caudal sagging of cerebellum by rapid leak of large amount of CSF which seems to be related with this case. Dural repair and minimizing CSF loss after intraoperative dural tearing would be helpful to prevent postoperative RCH.

• Proceedings of the KIPE Conference
• /
• 2017.11a
• /
• pp.141-142
• /
• 2017

In this paper, integrated series and shunt inverter is presented to solve power quality problems in distribution line system. In this configuration consists of series inverter and shunt inverter. Series inverter acts as DVR to compensate voltage during sagging occurred and shunt inverter optimize to inject balance active power from distributed power source like PV system with Maximum Power Point Tracing (MPPT). Finally, the proposed configuration is verified through the PSiM simulation.

• Journal of Industrial Technology
• /
• v.24 no.A
• /
• pp.83-90
• /
• 2004

Generally, electronic appliances are used on the basis of normal power source supply. The power source inevitably includes the abnormal condition, such as, sudden voltage sagging, power interrupt, and induced noises. As the electronic appliances which include micro-controller-based circuits are being increased recently, the controller circuit sometimes malfunctions by the abnormal condition of the power source. This situation causes serious problems such as hitch of electric appliance, fire and medical instrument glitch, which produces serious situations. In this paper, development of power interrupt tester which is highly suitable for an endurance test device under abnormal power source to microprocessor-based circuits is proposed 89C2051 microcontroller is performed to make power interrupt signal, and software controls peripheral hardwares and built-in functions. Experimental results of this study will offer a good application to electronic appliance maker as a test device of hardware and software debugging use.

• Journal of the Korean Ceramic Society
• /
• v.36 no.9
• /
• pp.991-996
• /
• 1999

Effect of solution property on the weight varation and microstructural change of film was studied by electrophoretic deposition in order to obtain a homogeneous and dense zirconia film. As a result of weight kinetics of film which obtained in alcohol or aqueous solution having different polarity experimental data showed large deviation from theoretical ones calculated by Zhang's kinetic model. It had been shown that the weight affecting factors was largely dependent on properties other than dielectric constant and viscosity of solvent zeta potential appiled field and time. In initial stage a main factor of the drastic weight increase was the capillary drag of porous substrate. The cause of weight decrease with time in aqueous solution after 300 s was attributed to the defect of film by sagging and electrolytic reaction. The electrolyte film which prepared in alcohol solution with good wetting for substrate had better homogeneous and dense microstructure than one in aqueous solution with high surface tension.